Design of Hydraulic Gates

0 durchschnittliche Bewertung
( 0 Bewertungen bei Goodreads )
 
9780415659390: Design of Hydraulic Gates
Alle Exemplare der Ausgabe mit dieser ISBN anzeigen:
 
 
Críticas:

Praise for the first edition:

Nobody is better qualified than Professor Paulo Erbisti to have written this book “Design of Hydraulic Gates”, because he has acquired a very broad personal experience during his career devoted to hydroelectric projects, not only with a scientific spirit, but also a practical approach. He knows very well all the phases of implementation of hydromechanical equipment, from feasibility studies through to erection and commissioning, as well as rehabilitation.

This book is extremely welcome as an efficient synthesis of a broad subject, and engineers from the various disciplines, not only mechanical and electrical but also civil engineers, will recognize its value. The author has covered the subject of gates very comprehensively in his book, from history to new developments. He discusses not only the principle of gates and their associated equipment, the choice of type and calculation methods, but also he (as an excellent practical engineer, who knows that ‘the devil hides in the details’) describes their construction details. Each chapter is supported by a complete list of international references.

The book will be very useful for experienced engineers (as well as students) for the conception, construction and operation of gates.The interest of this book is evident as a reference, and Professor Erbisti should be gratefully acknowledged for his important contribution to this technology.

Raymond Lafitte, Professor at EPFL (Federal Institute of Technology, Lausanne), President of the International Hydropower Association


As one leafs through the book, one is pleasantly surprised by the many clear illustrations and photos (ca. 300), tables (ca. 70) and calculations (ca. 20). [...] On the one hand, the book – as a textbook – offers students a very clear introduction to the field and on the other hand, represents a handbook with lots of useful advice for engineers in the field of steel hydraulic engineering. Some 90 bibliographic references lead the reader to further background information, also in the realm of more theoretically oriented steel hydraulic engineering. Erbisti’s book "Design of Hydraulic Gates" is all in all a very useful and recommended book.

Prof. Dr.-Ing. Gerhard Schmaußer, Aalen, in Stahlbau 73 (2004), 644-646

Reseña del editor:

Revised and updated, this second edition of Design of Hydraulic Gates maintains the same goal as the original: to be used as a textbook and a manual of design of gates, presenting the main aspects of design, manufacture, installation and operation of hydraulic gates, while introducing new products, technologies and calculation procedures. This edition included new chapters on intake gates and trashrack design, highlighting the aspects of safety, operational and maintenance procedures. To improve the strength against structural failure of intake trashracks, the author proposes a series of rigid calculation assumptions, design parameters and manufacturing procedures, which will certainly result in safer trashracks. Some 340 drawings and photographs, 82 tables, 107 references and 23 worked examples help the reader to understand the basic concepts and calculation methods presented.

„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.

Weitere beliebte Ausgaben desselben Titels

9781138073739: Design of Hydraulic Gates

Vorgestellte Ausgabe

ISBN 10:  1138073733 ISBN 13:  9781138073739
Verlag: CRC Press, 2017
Softcover

9789058096210: Design of Hydraulic Gates

Taylor..., 2003
Hardcover

Beste Suchergebnisse bei AbeBooks

1.

Paulo C.F. Erbisti
ISBN 10: 0415659396 ISBN 13: 9780415659390
Neu Anzahl: 1
Anbieter
East West Academic Books LLC
(Burlington, NC, USA)
Bewertung
[?]

Buchbeschreibung Zustand: New. New, Fast Delivery , 100 % money back if any problem with product and services. Bestandsnummer des Verkäufers ABECA20960

Weitere Informationen zu diesem Verkäufer | Verkäufer kontaktieren

Neu kaufen
EUR 85,33
Währung umrechnen

In den Warenkorb

Versand: Gratis
Innerhalb USA
Versandziele, Kosten & Dauer

2.

Paulo C.F. Erbisti
ISBN 10: 0415659396 ISBN 13: 9780415659390
Neu Anzahl: 1
Anbieter
East West Academic Books LLC
(Burlington, NC, USA)
Bewertung
[?]

Buchbeschreibung Zustand: New. Bestandsnummer des Verkäufers UK336

Weitere Informationen zu diesem Verkäufer | Verkäufer kontaktieren

Neu kaufen
EUR 112,24
Währung umrechnen

In den Warenkorb

Versand: Gratis
Innerhalb USA
Versandziele, Kosten & Dauer

3.

Erbisti
Verlag: Crc Press
ISBN 10: 0415659396 ISBN 13: 9780415659390
Neu Anzahl: 1
Anbieter
East West Academic Books LLC
(Burlington, NC, USA)
Bewertung
[?]

Buchbeschreibung Crc Press. Zustand: New. New,Fast Delivery , 100 % money back if any problem with product and services. Ship from multiple location's for fast delivery. Bestandsnummer des Verkäufers ABEJK1083

Weitere Informationen zu diesem Verkäufer | Verkäufer kontaktieren

Neu kaufen
EUR 156,86
Währung umrechnen

In den Warenkorb

Versand: Gratis
Innerhalb USA
Versandziele, Kosten & Dauer

4.

Paulo C. F. Erbisti
Verlag: Taylor & Francis Ltd, United Kingdom (2014)
ISBN 10: 0415659396 ISBN 13: 9780415659390
Neu Hardcover Anzahl: 10
Anbieter
The Book Depository
(London, Vereinigtes Königreich)
Bewertung
[?]

Buchbeschreibung Taylor & Francis Ltd, United Kingdom, 2014. Hardback. Zustand: New. 2nd New edition. Language: English. Brand new Book. Revised and updated, this second edition of Design of Hydraulic Gates maintains the same goal as the original: to be used as a textbook and a manual of design of gates, presenting the main aspects of design, manufacture, installation and operation of hydraulic gates, while introducing new products, technologies and calculation procedures. This edition included new chapters on intake gates and trashrack design, highlighting the aspects of safety, operational and maintenance procedures. To improve the strength against structural failure of intake trashracks, the author proposes a series of rigid calculation assumptions, design parameters and manufacturing procedures, which will certainly result in safer trashracks. Some 340 drawings and photographs, 82 tables, 107 references and 23 worked examples help the reader to understand the basic concepts and calculation methods presented. Bestandsnummer des Verkäufers AA69780415659390

Weitere Informationen zu diesem Verkäufer | Verkäufer kontaktieren

Neu kaufen
EUR 200,52
Währung umrechnen

In den Warenkorb

Versand: Gratis
Von Vereinigtes Königreich nach USA
Versandziele, Kosten & Dauer

5.

Paulo C.F. Erbisti
Verlag: CRC Press (2014)
ISBN 10: 0415659396 ISBN 13: 9780415659390
Neu Anzahl: 10
Anbieter
Books2Anywhere
(Fairford, GLOS, Vereinigtes Königreich)
Bewertung
[?]

Buchbeschreibung CRC Press, 2014. HRD. Zustand: New. New Book. Shipped from UK in 4 to 14 days. Established seller since 2000. Bestandsnummer des Verkäufers FT-9780415659390

Weitere Informationen zu diesem Verkäufer | Verkäufer kontaktieren

Neu kaufen
EUR 192,97
Währung umrechnen

In den Warenkorb

Versand: EUR 10,28
Von Vereinigtes Königreich nach USA
Versandziele, Kosten & Dauer

6.

Paulo C. F. Erbisti
Verlag: Taylor & Francis Ltd, United Kingdom (2014)
ISBN 10: 0415659396 ISBN 13: 9780415659390
Neu Hardcover Anzahl: 10
Anbieter
Book Depository International
(London, Vereinigtes Königreich)
Bewertung
[?]

Buchbeschreibung Taylor & Francis Ltd, United Kingdom, 2014. Hardback. Zustand: New. 2nd New edition. Language: English. Brand new Book. Revised and updated, this second edition of Design of Hydraulic Gates maintains the same goal as the original: to be used as a textbook and a manual of design of gates, presenting the main aspects of design, manufacture, installation and operation of hydraulic gates, while introducing new products, technologies and calculation procedures. This edition included new chapters on intake gates and trashrack design, highlighting the aspects of safety, operational and maintenance procedures. To improve the strength against structural failure of intake trashracks, the author proposes a series of rigid calculation assumptions, design parameters and manufacturing procedures, which will certainly result in safer trashracks. Some 340 drawings and photographs, 82 tables, 107 references and 23 worked examples help the reader to understand the basic concepts and calculation methods presented. Bestandsnummer des Verkäufers AA69780415659390

Weitere Informationen zu diesem Verkäufer | Verkäufer kontaktieren

Neu kaufen
EUR 203,49
Währung umrechnen

In den Warenkorb

Versand: Gratis
Von Vereinigtes Königreich nach USA
Versandziele, Kosten & Dauer

7.

Paulo C.F. Erbisti
ISBN 10: 0415659396 ISBN 13: 9780415659390
Neu Anzahl: 1
Anbieter
Speedy Hen LLC
(Sunrise, FL, USA)
Bewertung
[?]

Buchbeschreibung Zustand: New. Bookseller Inventory # ST0415659396. Bestandsnummer des Verkäufers ST0415659396

Weitere Informationen zu diesem Verkäufer | Verkäufer kontaktieren

Neu kaufen
EUR 205,85
Währung umrechnen

In den Warenkorb

Versand: Gratis
Innerhalb USA
Versandziele, Kosten & Dauer

8.

Paulo C.F. Erbisti (author)
Verlag: Taylor and Francis 2014-05-29, Boca Raton (2014)
ISBN 10: 0415659396 ISBN 13: 9780415659390
Neu Hardcover Anzahl: 5
Anbieter
Blackwell's
(Oxford, OX, Vereinigtes Königreich)
Bewertung
[?]

Buchbeschreibung Taylor and Francis 2014-05-29, Boca Raton, 2014. hardback. Zustand: New. Bestandsnummer des Verkäufers 9780415659390

Weitere Informationen zu diesem Verkäufer | Verkäufer kontaktieren

Neu kaufen
EUR 207,75
Währung umrechnen

In den Warenkorb

Versand: EUR 8,57
Von Vereinigtes Königreich nach USA
Versandziele, Kosten & Dauer

9.

Erbisti, Paulo C.F.
Verlag: CRC Press (2014)
ISBN 10: 0415659396 ISBN 13: 9780415659390
Neu Hardcover Anzahl: 2
Anbieter
Murray Media
(NORTH MIAMI BEACH, FL, USA)
Bewertung
[?]

Buchbeschreibung CRC Press, 2014. Hardcover. Zustand: New. Never used!. Bestandsnummer des Verkäufers P110415659396

Weitere Informationen zu diesem Verkäufer | Verkäufer kontaktieren

Neu kaufen
EUR 218,97
Währung umrechnen

In den Warenkorb

Versand: Gratis
Innerhalb USA
Versandziele, Kosten & Dauer

10.

Erbisti, Paulo C.F.
Verlag: CRC Press
ISBN 10: 0415659396 ISBN 13: 9780415659390
Neu Hardcover Anzahl: 1
Anbieter
Bewertung
[?]

Buchbeschreibung CRC Press. Zustand: BRAND NEW. BRAND NEW Hardcover A Brand New Quality Book from a Full-Time Veteran Owned Bookshop in business since 1992!. Bestandsnummer des Verkäufers 3440635

Weitere Informationen zu diesem Verkäufer | Verkäufer kontaktieren

Neu kaufen
EUR 240,08
Währung umrechnen

In den Warenkorb

Versand: Gratis
Innerhalb USA
Versandziele, Kosten & Dauer

Es gibt weitere Exemplare dieses Buches

Alle Suchergebnisse ansehen