Verwandte Artikel zu Milling Operations in the Lathe (Workshop Practice...
Inhaltsangabe
Despite the growing numbers of milling machines in amateur workshops, a majority of model engineers still rely on a lathe and a drilling machine as the basic equipment. The lathe, 'the king of machine tools', can be adapted for almost any function, but next to turning its most valuable use is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by the addition of a separate milling attachment. One of the most popular titles in model engineering books for almost sixty years was Milling in the Lathe, which first appeared in the 1920s and continued in updated and revised editions until 1983. This book replaces it, covering all the basic information it contained and adding to it from recent experiences and developments. The author, Tubal Cain, needs no introduction to Model Engineer readers as a highly experienced engineer and skilled craftsman with an ability to write on engineering subjects in a clear, simple and thorough style.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Tubal Cain was the pen name of engineer and craftsman Tom Walshaw, the writer of many best-selling home workshop and model engineering guides.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Suchergebnisse für Milling Operations in the Lathe (Workshop Practice...
Beispielbild für diese ISBN
Milling Operations in the Lathe
Verlag:
Special Interest Model Books, 1998
ISBN 10: 0852428405
ISBN 13: 9780852428405
Gebraucht
Paperback
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less. Bestandsnummer des Verkäufers G0852428405I4N00
Gebraucht kaufen
EUR 9,22
Versand gratis
Versand innerhalb von USA
Versand innerhalb von USA
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
Milling Operations in the Lathe
Verlag:
Fox Chapel Publishers International, 1998
ISBN 10: 0852428405
ISBN 13: 9780852428405
Gebraucht
Paperback
Anbieter: World of Books (was SecondSale), Montgomery, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. Despite the growing numbers of milling machines in amateur workshops, a majority of model engineers still rely on a lathe and a drilling machine as the basic equipment. The lathe, 'the king of machine tools', can be adapted for almost any function, but next to turning its most valuable use is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by the addition of a separate milling attachment. One of the most popular titles in model engineering books for almost sixty years was Milling in the Lathe, which first appeared in the 1920s and continued in updated and revised editions until 1983. This book replaces it, covering all the basic information it contained and adding to it from recent experiences and developments. The author, Tubal Cain, needs no introduction to Model Engineer readers as a highly experienced engineer and skilled craftsman with an ability to write on engineering subjects in a clear, simple and thorough style. Bestandsnummer des Verkäufers CIN0852428405G
Gebraucht kaufen
EUR 9,32
Versand gratis
Versand innerhalb von USA
Versand innerhalb von USA
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
Milling Operations in the Lathe
Verlag:
Special Interest Model Books, 1998
ISBN 10: 0852428405
ISBN 13: 9780852428405
Gebraucht
Softcover
Anbieter: Symbilbooks, Longwood, FL, USA
Verkäuferbewertung 4 von 5 Sternen
Zustand: Used: Acceptable. Some ruffling of pages from water damage, else clean copy for reading with no marks or tears. Bestandsnummer des Verkäufers lathe-D1
Gebraucht kaufen
EUR 4,61
EUR 5,37 Versand
Versand innerhalb von USA
Versand innerhalb von USA
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
Milling Operations in the Lathe
ISBN 10: 0852428405
ISBN 13: 9780852428405
Gebraucht
Paperback
Anbieter: WorldofBooks, Goring-By-Sea, WS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. Despite the growing numbers of milling machines in amateur workshops, a majority of model engineers still rely on a lathe and a drilling machine as the basic equipment. The lathe, 'the king of machine tools', can be adapted for almost any function, but next to turning its most valuable use is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by the addition of a separate milling attachment. One of the most popular titles in model engineering books for almost sixty years was Milling in the Lathe, which first appeared in the 1920s and continued in updated and revised editions until 1983. This book replaces it, covering all the basic information it contained and adding to it from recent experiences and developments. The author, Tubal Cain, needs no introduction to Model Engineer readers as a highly experienced engineer and skilled craftsman with an ability to write on engineering subjects in a clear, simple and thorough style. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged. Bestandsnummer des Verkäufers GOR001278524
Gebraucht kaufen
EUR 4,11
EUR 6,69 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: 2 verfügbar
Beispielbild für diese ISBN
Milling Operations in the Lathe
Verlag:
Fox Chapel Publishers International, 1998
ISBN 10: 0852428405
ISBN 13: 9780852428405
Gebraucht
Paperback
Anbieter: World of Books Inc, Montgomery, IL, USA
Verkäuferbewertung 4 von 5 Sternen
Paperback. Zustand: Good. Despite the growing numbers of milling machines in amateur workshops, a majority of model engineers still rely on a lathe and a drilling machine as the basic equipment. The lathe, 'the king of machine tools', can be adapted for almost any function, but next to turning its most valuable use is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by the addition of a separate milling attachment. One of the most popular titles in model engineering books for almost sixty years was Milling in the Lathe, which first appeared in the 1920s and continued in updated and revised editions until 1983. This book replaces it, covering all the basic information it contained and adding to it from recent experiences and developments. The author, Tubal Cain, needs no introduction to Model Engineer readers as a highly experienced engineer and skilled craftsman with an ability to write on engineering subjects in a clear, simple and thorough style. Bestandsnummer des Verkäufers CIN0852428405G
Gebraucht kaufen
EUR 11,17
Versand gratis
Versand innerhalb von USA
Versand innerhalb von USA
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
Milling Operations in the Lathe
Verlag:
Special Interest Model Books, 1998
ISBN 10: 0852428405
ISBN 13: 9780852428405
Gebraucht
Softcover
Anbieter: Wonder Book, Frederick, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Very Good condition. A copy that may have a few cosmetic defects. May also contain light spine creasing or a few markings such as an owner's name, short gifter's inscription or light stamp. Bestandsnummer des Verkäufers Q20T-01487
Gebraucht kaufen
EUR 12,90
Versand gratis
Versand innerhalb von USA
Versand innerhalb von USA
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
Milling Operations in the Lathe
Verlag:
Fox Chapel Publishing Company, Incorporated, 1998
ISBN 10: 0852428405
ISBN 13: 9780852428405
Gebraucht
Softcover
Anbieter: Better World Books Ltd, Dunfermline, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Former library copy. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good. Bestandsnummer des Verkäufers 9453922-6
Gebraucht kaufen
EUR 7,61
EUR 5,98 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
Milling Operations in the Lathe: 5 (Workshop Practice Series)
Anbieter: Chiron Media, Wallingford, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
paperback. Zustand: New. Brand new book, sourced directly from publisher. Dispatch time is 6-7 days from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely. Bestandsnummer des Verkäufers 6666-MAC-9780852428405
Neu kaufen
EUR 11,32
EUR 5,37 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: 10 verfügbar
Foto des Verkäufers
Milling Operations in the Lathe (Paperback)
Verlag:
Fox Chapel Publishers International, Hemel Hempstead, 1998
ISBN 10: 0852428405
ISBN 13: 9780852428405
Neu
Paperback
Anbieter: Grand Eagle Retail, Bensenville, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: new. Paperback. Despite the growing numbers of milling machines in amateur workshops, a majority of model engineers still rely on a lathe and a drilling machine as the basic equipment. The lathe, 'the king of machine tools', can be adapted for almost any function, but next to turning its most valuable use is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by the addition of a separate milling attachment. One of the most popular titles in model engineering books for almost sixty years was Milling in the Lathe, which first appeared in the 1920s and continued in updated and revised editions until 1983. This book replaces it, covering all the basic information it contained and adding to it from recent experiences and developments. The author, Tubal Cain, needs no introduction to Model Engineer readers as a highly experienced engineer and skilled craftsman with an ability to write on engineering subjects in a clear, simple and thorough style. This book is a thorough and practical discourse on how to use the lathe for all types of milling work. Next to turning, the most valuable use of the lathe is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by adding a separate milling attachment. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Bestandsnummer des Verkäufers 9780852428405
Foto des Verkäufers
Milling Operations in the Lathe
Verlag:
Fox Chapel Publishers International, GB, 1998
ISBN 10: 0852428405
ISBN 13: 9780852428405
Neu
Paperback
Anbieter: Rarewaves.com USA, London, LONDO, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: New. Despite the growing numbers of milling machines in amateur workshops, a majority of model engineers still rely on a lathe and a drilling machine as the basic equipment. The lathe, 'the king of machine tools', can be adapted for almost any function, but next to turning its most valuable use is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by the addition of a separate milling attachment. One of the most popular titles in model engineering books for almost sixty years was Milling in the Lathe, which first appeared in the 1920s and continued in updated and revised editions until 1983. This book replaces it, covering all the basic information it contained and adding to it from recent experiences and developments. The author, Tubal Cain, needs no introduction to Model Engineer readers as a highly experienced engineer and skilled craftsman with an ability to write on engineering subjects in a clear, simple and thorough style. Bestandsnummer des Verkäufers LU-9780852428405
Neu kaufen
EUR 17,23
Versand gratis
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: Mehr als 20 verfügbar