Verwandte Artikel zu Workholding in the Lathe: 15 (Workshop Practice Series)
Inhaltsangabe
The centre-lathe is by far the most versatile machine tool in the workshop, but as soon as you depart from plain turning between centres, the question arises 'how to hold the work'. This book explains the methods and techniques required. A fundamental requirement of lathe operation, for accuracy and safety, is the ability to hold any workpiece securely and, preferably, repeatedly on the machine. While few problems arise with straightforward work on a properly aligned lathe, the variety of jobs undertaken by small workshops and model engineers is bound to give rise to occasions when how to hold work requires consideration. When great accuracy is essential, working methods and lathe set-up are vital for an acceptable result. In this book Tubal Cain discusses in his inimitable, practical style all aspects of the subject with the whys and hows, including basic lathe alignment.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Tubal Cain was the pen name of engineer and craftsman Tom Walshaw, the writer of many best-selling home workshop and model engineering guides.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Neu kaufen
Diesen Artikel anzeigen
EUR 13,54
EUR 2,23 für den Versand innerhalb von/der USA
Versandziele, Kosten & DauerSuchergebnisse für Workholding in the Lathe: 15 (Workshop Practice Series)
Beispielbild für diese ISBN
Workholding in the Lathe: 15 (Workshop Practice Series)
Anbieter: WorldofBooks, Goring-By-Sea, WS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged. Bestandsnummer des Verkäufers GOR001528234
Anzahl: 7 verfügbar
Beispielbild für diese ISBN
Workholding in the Lathe (Workshop Practice Series)
Anbieter: Jenson Books Inc, Logan, UT, USA
Verkäuferbewertung 5 von 5 Sternen
paperback. Zustand: Very Good. A clean, cared for item that is unmarked and shows limited shelf wear. Bestandsnummer des Verkäufers 4BQGBJ014U7S
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
Workholding in the Lathe (Workshop Practice Series)
Verlag:
Trans-Atlantic Publications, Inc, 1986
ISBN 10: 0852429088
ISBN 13: 9780852429082
Gebraucht
Paperback
Anbieter: Books From California, Simi Valley, CA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. Bestandsnummer des Verkäufers mon0003803000
Anzahl: 1 verfügbar
Foto des Verkäufers
Workholding in the Lathe (Workshop Practice Series)
Anbieter: Bay State Book Company, North Smithfield, RI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: acceptable. The book is complete and readable, with all pages and cover intact. Dust jacket, shrink wrap, or boxed set case may be missing. Pages may have light notes, highlighting, or minor water exposure, but nothing that affects readability. May be an ex-library copy and could include library markings or stickers. Bestandsnummer des Verkäufers BSM.QT7W
Anzahl: 1 verfügbar
Foto des Verkäufers
Workholding in the Lathe
Anbieter: GreatBookPrices, Columbia, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: As New. Unread book in perfect condition. Bestandsnummer des Verkäufers 1458503
Anzahl: 4 verfügbar
Foto des Verkäufers
Workholding in the Lathe
Anbieter: GreatBookPrices, Columbia, MD, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Bestandsnummer des Verkäufers 1458503-n
Anzahl: 4 verfügbar
Foto des Verkäufers
Workholding in the Lathe (Paperback)
Verlag:
Fox Chapel Publishers International, Hemel Hempstead, 1998
ISBN 10: 0852429088
ISBN 13: 9780852429082
Neu
Paperback
Anbieter: Grand Eagle Retail, Mason, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: new. Paperback. The centre-lathe is by far the most versatile machine tool in the workshop, but as soon as you depart from plain turning between centres, the question arises 'how to hold the work'. This book explains the methods and techniques required. A fundamental requirement of lathe operation, for accuracy and safety, is the ability to hold any workpiece securely and, preferably, repeatedly on the machine. While few problems arise with straightforward work on a properly aligned lathe, the variety of jobs undertaken by small workshops and model engineers is bound to give rise to occasions when how to hold work requires consideration. When great accuracy is essential, working methods and lathe set-up are vital for an acceptable result. In this book Tubal Cain discusses in his inimitable, practical style all aspects of the subject with the whys and hows, including basic lathe alignment. A fundamental requirement of the lathe operation is the ability to hold any workpiece securely on the machine. In this book, the author discusses all the practical aspects of the subject, with photographs to illustrate specific points. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Bestandsnummer des Verkäufers 9780852429082
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
Workholding in the Lathe
Verlag:
Fox Chapel Publishers International, 1998
ISBN 10: 0852429088
ISBN 13: 9780852429082
Neu
PAP
Anbieter: PBShop.store US, Wood Dale, IL, USA
Verkäuferbewertung 5 von 5 Sternen
PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000. Bestandsnummer des Verkäufers GB-9780852429082
Anzahl: 3 verfügbar
Foto des Verkäufers
Workholding in the Lathe
Verlag:
Fox Chapel Publishers International, GB, 1998
ISBN 10: 0852429088
ISBN 13: 9780852429082
Neu
Paperback
Anbieter: Rarewaves.com USA, London, LONDO, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: New. The centre-lathe is by far the most versatile machine tool in the workshop, but as soon as you depart from plain turning between centres, the question arises 'how to hold the work'. This book explains the methods and techniques required. A fundamental requirement of lathe operation, for accuracy and safety, is the ability to hold any workpiece securely and, preferably, repeatedly on the machine. While few problems arise with straightforward work on a properly aligned lathe, the variety of jobs undertaken by small workshops and model engineers is bound to give rise to occasions when how to hold work requires consideration. When great accuracy is essential, working methods and lathe set-up are vital for an acceptable result. In this book Tubal Cain discusses in his inimitable, practical style all aspects of the subject with the whys and hows, including basic lathe alignment. Bestandsnummer des Verkäufers LU-9780852429082
Anzahl: Mehr als 20 verfügbar
Foto des Verkäufers
Workholding in the Lathe
Verlag:
Fox Chapel Publishers International, GB, 1998
ISBN 10: 0852429088
ISBN 13: 9780852429082
Neu
Paperback
Anbieter: Rarewaves USA, OSWEGO, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: New. The centre-lathe is by far the most versatile machine tool in the workshop, but as soon as you depart from plain turning between centres, the question arises 'how to hold the work'. This book explains the methods and techniques required. A fundamental requirement of lathe operation, for accuracy and safety, is the ability to hold any workpiece securely and, preferably, repeatedly on the machine. While few problems arise with straightforward work on a properly aligned lathe, the variety of jobs undertaken by small workshops and model engineers is bound to give rise to occasions when how to hold work requires consideration. When great accuracy is essential, working methods and lathe set-up are vital for an acceptable result. In this book Tubal Cain discusses in his inimitable, practical style all aspects of the subject with the whys and hows, including basic lathe alignment. Bestandsnummer des Verkäufers LU-9780852429082
Anzahl: 2 verfügbar