Compressor Surge and Rotating Stall: Modeling and Control (Advances in Industrial Control) - Softcover

Gravdahl, Jan Tommy; Egeland, Olav

Softcover

ISBN 10: 1447112113 ISBN 13: 9781447112112

Verlag: Springer, 2011

Inhaltsangabe

The series Advances in Industrial Control aims to report and encourage technology transfer in control engineering. The rapid development of control technology impacts all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies . . . , new challenges. Much of this development work resides in industrial reports, feasibility study papers and the reports of advanced collaborative projects. The series offers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Operating plant as close as possible to constraint boundaries so often brings economic benefits in industrial process control. This is the conundrum at the heart of this monograph by Tommy Gravdahl and Olav Egeland on stall control for compressors. Operation of the compressor closer to the surge line can increase operational efficiency and flexibility The approach taken by the authors follows the modern control system paradigm: -physical understanding, detailed modelling and simulation studies and finally control studies. The thoroughness of the presentation, bibliography and appendices indicates that the volume has all the hallmarks of being a classic for its subject. Despite the monograph's narrow technical content, the techniques and insights presented should appeal to the wider industrial control community as well as the gas turbine/compressor specialist. M. J. Grimble and M. A.

Über diesen Titel

Über die Autorin bzw. den Autor

The book is written by professors and doctoral researchers from the Norwegian University of Science and Technology. The authors are also associated with SINTEF, which is a Norwegian research organization that conducts applied research for the industry. NTNU and SINTEF have had cooperating research activities related to modelling, physical implementation, and control of snake robots since 2001. Over these years, our research group has acquired a leading role within this field with numerous publications in peer-reviewed conferences and top-ranked international journals. The research activity has resulted in the development of several snake robots which have attracted much national and international attention, and has also helped establish and strengthen relations with key research communities working with snake robots in Japan, USA, and the Netherlands. Nonlinear control of mechanical systems, which includes snake robot research, has been the main research activity by the research group of the authors for several decades with excellent results.

Von der hinteren Coverseite

This work gives a comprehensive overview of the achievements in the field of modeling and active control of instabilities in compressions systems over the last decade.

Existing models of unstable compression systems are in most cases restricted to constant speed compressors. Here, two models are derived that take time varying rotational speed into account - one for centrifugal compressors and one for axial compressors.

• The main focus of the modeling element is the inclusion of non-constant speed in existing dynamic models of unstable compression systems, and the study of surge and rotating stall in connection with this.

• The focus of the control element is the use of a close coupled valve as a means of stabilising surge and rotating stall. Little work has yet been published on this.

Using techniques such as backstepping and passivity, controllers for a close coupled valve in the compression system are derived in order to stabilise the compressors and extend the range of mass flows over which it can be operated stably. Detailed analysis of the closed loop systems is performed and many case studies with simulations are presented.

Scientists and graduate students working in this area will find this particularly useful. It will also be a valuable addition to libraries and the industry as a whole.

 

Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Details zur Ausgabe

• Verlag: Springer
• Erscheinungsdatum: 2011
• Sprache: Englisch
• ISBN 10: 1447112113
• ISBN 13: 9781447112112
• Einband: Taschenbuch
• Anzahl der Seiten: 248
• Kontakt zum Hersteller: Springer Nature Customer Service Center GmbH; ProductSafety@springernature.com; ; Europaplatz 3; Heidelberg; 69115; Deutschland