Environmentally-Friendly Product Development: Methods and Tools - Hardcover

Hardcover

ISBN 10: 1852339039 ISBN 13: 9781852339036

Verlag: Springer, 2004

Inhaltsangabe

Development of environmentally friendly products gains an increasing - portance in science and in industry. While product development was strongly dedicated to achieve quality, cost and time targets, environmental issues indirectly had always been under consideration by engineers, see Fig. 1. Furthermore a methodology for the development of environm- tally sound products was missing. Despite of significant progress in using computer aided tools for product development and design, environmental aspects were attended. Computer aided tools typically do not include methods for considering environmental issues enabling the designer to - sess a product’s environmental effects. Fig. 1. Vision of Environment as a key target for product development v vi Preface Product related environmental issues are getting more and more political and public awareness. Development of environmentally friendly products has become an action item for both, politics and industry (UNFCCC 1997). Energy consumption is on the agenda and covers pollution and resource saving. Typical topics of directives of the European Union are waste, noise, air pollution, water, nature and biodiversity, soil protection, civil protection and climate change. After the translation into national law the development of environmentally friendly products is a basic approach to contribute to the fulfilment of the topics mentioned above. In the European Community a “Communication from the Commission to the Council and the European Parliament” on “Integrated Product Policy” was adopted on th 18 June 2003 (EC 2003).

Über diesen Titel

Über die Autorin bzw. den Autor

Prof. Dr.-Ing. Prof. E.h. Eberhard Abele, born 1953, studied mechanical engineering. Research fellow and head of the department "industrial automation" at the Fraunhofer Institute IPA in Stuttgart. From 1986 to 1999, he worked in the automotive supply industry as head of manufacturing technology and technical director for factories in Spain and France. The focus of his industrial activities was on production management of highly automated factories and systematical productivity improvement. Since 2000 until 2021 he was head of the Institute PTW, which today is managed by Prof. Metternich and Prof. Weigold. Prof. Abele contributed to more than 200 publications in the field of manufacturing organisation, machine tool technology and manufacturing processes. The Process Learning Factory (CIP), which he initiated in 2008, and the Learning factory for energy efficiency (ETA-Factory, opened in 2013) have shown a novel path in the long-term qualification of university graduates and employees from companies. He is a founding member of the International Alliance of Learning Factories (IALF). Fellow in the Scientific Society for Production Engineering (WGP), CIRP, acatech. Member of the supervisory board of EIT -Manufacturing, Festo-Didactic, Zahoransky AG and Datron AG.Prof. Dr.-Ing. Joachim Metternich studied industrial engineering at the Technical University of Darmstadt and received his doctorate in 2001. After his time as assistant of the CEO of TRUMPF Werkzeugmaschinen GmbH, he headed a production group at Bosch Diesel s.r.o. in the Czech Republic. He then took over the responsibility for the worldwide lean production system of Knorr-Bremse SfS GmbH, a manufacturer of systems for rail vehicles. Since 2012 he is directors of the Institute of Production Management, Technology and Machine Tools (PTW).  Hisresearch interests include lean manufacturing and its digital upgrading, and the use of learning factories for competence development in manufacturing. He is the author and co-author of more than 200 articles and book chapters. He is also a member and past president of the International Association of Learning Factories (IALF) and the Scientific Society for Production Engineering (WGP).Dr.-Ing. Michael Tisch studied industrial engineering with a technical specialisation in mechanical engineering at the Technical University of Darmstadt. Until July 2018 he worked as chief engineer at the Institute of Production Management, Technology and Machine Tools at the Technical University of Darmstadt. In his research and in his doctoral thesis (2018) he dealt with the design of learning factories for lean production. Since 2018 he has been at MTU Maintenance Hannover GmbH, currently as a senior managerof a repair department for engine parts.Dr.-Ing. Antonio Kreß studied industrial engineering with a technical specialisation in mechanical engineering at the Technical University of Darmstadt. Until June 2023 he worked as a research associate and post-doc at the Institute of Production Management, Technology and Machine Tools at the Technical University of Darmstadt. In his research and in his doctoral thesis (2022) he dealt with the configuration of learning factories. Since 2023 he has been at Schunk Holding GmbH, currently as a senior manager for global operations. Prof. Dr.-Ing. Reiner Anderl, TU Darmstadt, Leiter des Fachgebietes Datenverarbeitung in der Konstruktion, Fachbereich Maschinenbau;Dipl.-Ing. Dietmar Trippner, BMW AG, München

Details zur Ausgabe

• Verlag: Springer
• Erscheinungsdatum: 2004
• Sprache: Englisch
• ISBN 10: 1852339039
• ISBN 13: 9781852339036
• Einband: Gebundene Ausgabe
• Anzahl der Seiten: 349
• Herausgeber: Abele Eberhard, Anderl Reiner, Birkhofer Herbert
• Kontakt zum Hersteller: Springer Nature Customer Service Center GmbH; ProductSafety@springernature.com; ; Europaplatz 3; Heidelberg; 69115; Deutschland