Verwandte Artikel zu The Boundary Element Method with Programming: For Engineers...
Inhaltsangabe
This is a sequel to the book “Programming the Boundary Element Method” by G. Beer published by Wiley in 2001. The scope of this book is different however and this is reflected in the title. Whereas the previous book concentrated on explaining the implementation of a limited range of problems into computer code and the emphasis was on programming, in the current book the problems covered are extended, the emphasis is on explaining the theory and computer code is not presented for all topics. The new topics covered range from dynamics to piezo-electricity. However, the main idea, to provide an explanation of the Boundary Element Method (BEM), that is easy for engineers and scientists to follow, is retained. This is achieved by explaining some aspects of the method in an engineering rather than mathematical way. Another new feature of the book is that it deals with the implementation of the method on parallel processing hardware. I. M. Smith, who has been involved in programming the finite element method for decades, illustrates that the BEM is “embarrassingly parallelisable”. It is shown that the conversion of the BEM programs to run efficiently on parallel processing hardware is not too difficult and the results are very impressive, such as solving a 20 000 element problem during a “coffee break”.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Gernot Beer is Professor and head of the Institute for Structural Analysis at the Graz University of Technology. He has been involved in the development, teaching and application of the BEM and the coupled BEM/FEM and has written several texts on the subject. He is the author of the commercial program BEFE and heads the development of its successor BEFE++.
Ian M. Smith is Professor of Engineering at the University of Manchester. He has consulted widely on engineering projects and has written several texts on applied numerical analysis.
Christian Dünser is staff scientist at the Institute for Structural Analysis at the Graz University of Technology. Since his diploma thesis he has been working on the BEM and its application to geotechnical problems, in particular tunnelling.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
EUR 212,45
EUR 29,00 für den Versand von Vereinigtes Königreich nach Deutschland
Versandziele, Kosten & DauerNeu kaufen
Diesen Artikel anzeigen
EUR 78,78
EUR 2,30 für den Versand innerhalb von/der Deutschland
Versandziele, Kosten & DauerWeitere beliebte Ausgaben desselben Titels
Suchergebnisse für The Boundary Element Method with Programming: For Engineers...
Beispielbild für diese ISBN
The Boundary Element Method with Programming
Anbieter: Biblios, Frankfurt am main, HESSE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. pp. xiv + 494. Bestandsnummer des Verkäufers 18294906
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
The Boundary Element Method with Programming
Anbieter: Books Puddle, New York, NY, USA
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. pp. xiv + 494 1st Edition. Bestandsnummer des Verkäufers 26294896
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
The Boundary Element Method with Programming
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. pp. xiv + 494 Illus. Bestandsnummer des Verkäufers 7585839
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
The Boundary Element Method With Programming.
Anbieter: Basi6 International, Irving, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service. Bestandsnummer des Verkäufers ABEJUNE24-262201
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
The Boundary Element Method With Programming.
Anbieter: Romtrade Corp., STERLING HEIGHTS, MI, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide. Bestandsnummer des Verkäufers ABNR-92194
Anzahl: 1 verfügbar
Foto des Verkäufers
The Boundary Element Method with Programming
Print-on-DemandAnbieter: moluna, Greven, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Gebunden. Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Introductory text for engineers and scientistsCovers theory and implementation Deals with a wide range of applicationsGernot Beer is Professor and head of the Institute for Structural Analysis at the Graz University of Technology. Bestandsnummer des Verkäufers 4487928
Anzahl: Mehr als 20 verfügbar
Foto des Verkäufers
The Boundary Element Method with Programming : For Engineers and Scientists
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This is a sequel to the book 'Programming the Boundary Element Method' by G. Beer published by Wiley in 2001. The scope of this book is different however and this is reflected in the title. Whereas the previous book concentrated on explaining the implementation of a limited range of problems into computer code and the emphasis was on programming, in the current book the problems covered are extended, the emphasis is on explaining the theory and computer code is not presented for all topics. The new topics covered range from dynamics to piezo-electricity. However, the main idea, to provide an explanation of the Boundary Element Method (BEM), that is easy for engineers and scientists to follow, is retained. This is achieved by explaining some aspects of the method in an engineering rather than mathematical way. Another new feature of the book is that it deals with the implementation of the method on parallel processing hardware. I. M. Smith, who has been involved in programming the finite element method for decades, illustrates that the BEM is 'embarrassingly parallelisable'. It is shown that the conversion of the BEM programs to run efficiently on parallel processing hardware is not too difficult and the results are very impressive, such as solving a 20 000 element problem during a 'coffee break'. Bestandsnummer des Verkäufers 9783211715741
Anzahl: 1 verfügbar
Foto des Verkäufers
The Boundary Element Method with Programming
Verlag:
Springer Vienna, Springer Vienna Apr 2008, 2008
ISBN 10: 3211715746
ISBN 13: 9783211715741
Neu
Hardcover
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Buch. Zustand: Neu. Neuware -This is a sequel to the book ¿Programming the Boundary Element Method¿ by G. Beer published by Wiley in 2001. The scope of this book is different however and this is reflected in the title. Whereas the previous book concentrated on explaining the implementation of a limited range of problems into computer code and the emphasis was on programming, in the current book the problems covered are extended, the emphasis is on explaining the theory and computer code is not presented for all topics. The new topics covered range from dynamics to piezo-electricity. However, the main idea, to provide an explanation of the Boundary Element Method (BEM), that is easy for engineers and scientists to follow, is retained. This is achieved by explaining some aspects of the method in an engineering rather than mathematical way. Another new feature of the book is that it deals with the implementation of the method on parallel processing hardware. I. M. Smith, who has been involved in programming the finite element method for decades, illustrates that the BEM is ¿embarrassingly parallelisable¿. It is shown that the conversion of the BEM programs to run efficiently on parallel processing hardware is not too difficult and the results are very impressive, such as solving a 20 000 element problem during a ¿coffee break¿.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 516 pp. Englisch. Bestandsnummer des Verkäufers 9783211715741
Anzahl: 2 verfügbar
Foto des Verkäufers
The Boundary Element Method with Programming
Print-on-DemandAnbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Buch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This is a thorough, yet understandable text about the boundary element method (BEM), an attractive alternative to the finite element method (FEM). It not only explains the theory, but also deals with the implementation into computer code written in FORTRAN 95 (software can be freely downloaded). Applications range from potential problems to static and dynamic problems in elasticity and plasticity. The book also addresses the issue of fast solution of large scale problems, using parallel processing hardware. Special topics such as the treatment of inclusions, heterogeneous domains and changing geometry are also addressed. Most chapters contain exercises and this makes the book suitable for teaching. Applications of the method to industrial problems are shown. The book is designed for engineers and scientists that want to understand how the method works and to apply the method and solve real problems. 516 pp. Englisch. Bestandsnummer des Verkäufers 9783211715741
Anzahl: 2 verfügbar
Beispielbild für diese ISBN
The Boundary Element Method with Programming: For Engineers and Scientists
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. In. Bestandsnummer des Verkäufers ria9783211715741_new
Anzahl: Mehr als 20 verfügbar