Inhaltsangabe
Prototyping or model making is one of the important steps to finalize a product design. It helps in conceptualization of a design. Before the start of full production a prototype is usually fabricated and tested. RP processes namely Stereo-lithography (SL), Selective Laser Sintering (SLS), Fused Deposition Modelling (FDM) and Laminated Object Manufacturing (LOM) are described. In Selective Laser Sintering (SLS) process, fine polymeric powder like polystyrene, polycarbonate or polyamide etc. (20 to 100 micrometer diameter) is spread on the substrate using a roller. Before starting CO2 laser scanning for sintering of a slice the temperature of the entire bed is raised just below its melting point by infrared heating in order to minimize thermal distortion (curling) and facilitate fusion to the previous layer. The laser is modulated in such a way that only those grains, which are in direct contact with the beam, are affected. Once laser scanning cures a slice, bed is lowered and powder feed chamber is raised so that a covering of powder can be spread evenly over the build area by counter rotating roller.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Dr. Chandan Deep Singh is working as assistant professor in department of mechanical engineering, Punjabi University, Patiala. He has completed his Ph.D. in 2016. He has guided around 50 students for M.Tech. thesis and has around 90 publications to his name.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Suchergebnisse für Effect of Laser Power on Component Strength in Laser...
Foto des Verkäufers
Effect of Laser Power on Component Strength in Laser Sintering
Verlag:
LAP LAMBERT Academic Publishing Mrz 2017, 2017
ISBN 10: 3330054867
ISBN 13: 9783330054868
Neu
Taschenbuch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Prototyping or model making is one of the important steps to finalize a product design. It helps in conceptualization of a design. Before the start of full production a prototype is usually fabricated and tested. RP processes namely Stereo-lithography (SL), Selective Laser Sintering (SLS), Fused Deposition Modelling (FDM) and Laminated Object Manufacturing (LOM) are described. In Selective Laser Sintering (SLS) process, fine polymeric powder like polystyrene, polycarbonate or polyamide etc. (20 to 100 micrometer diameter) is spread on the substrate using a roller. Before starting CO2 laser scanning for sintering of a slice the temperature of the entire bed is raised just below its melting point by infrared heating in order to minimize thermal distortion (curling) and facilitate fusion to the previous layer. The laser is modulated in such a way that only those grains, which are in direct contact with the beam, are affected. Once laser scanning cures a slice, bed is lowered and powder feed chamber is raised so that a covering of powder can be spread evenly over the build area by counter rotating roller. 84 pp. Englisch. Bestandsnummer des Verkäufers 9783330054868
Neu kaufen
EUR 35,90
EUR 23,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 2 verfügbar
Beispielbild für diese ISBN
Effect of Laser Power on Component Strength in Laser Sintering
Verlag:
LAP LAMBERT Academic Publishing, 2017
ISBN 10: 3330054867
ISBN 13: 9783330054868
Neu
Paperback
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Brand New. 84 pages. 8.66x5.91x0.19 inches. In Stock. Bestandsnummer des Verkäufers 3330054867
Neu kaufen
EUR 61,43
EUR 11,55 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Effect of Laser Power on Component Strength in Laser Sintering
Verlag:
LAP LAMBERT Academic Publishing Mär 2017, 2017
ISBN 10: 3330054867
ISBN 13: 9783330054868
Neu
Taschenbuch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Prototyping or model making is one of the important steps to finalize a product design. It helps in conceptualization of a design. Before the start of full production a prototype is usually fabricated and tested. RP processes namely Stereo-lithography (SL), Selective Laser Sintering (SLS), Fused Deposition Modelling (FDM) and Laminated Object Manufacturing (LOM) are described. In Selective Laser Sintering (SLS) process, fine polymeric powder like polystyrene, polycarbonate or polyamide etc. (20 to 100 micrometer diameter) is spread on the substrate using a roller. Before starting CO2 laser scanning for sintering of a slice the temperature of the entire bed is raised just below its melting point by infrared heating in order to minimize thermal distortion (curling) and facilitate fusion to the previous layer. The laser is modulated in such a way that only those grains, which are in direct contact with the beam, are affected. Once laser scanning cures a slice, bed is lowered and powder feed chamber is raised so that a covering of powder can be spread evenly over the build area by counter rotating roller.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 84 pp. Englisch. Bestandsnummer des Verkäufers 9783330054868
Neu kaufen
EUR 35,90
EUR 60,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Effect of Laser Power on Component Strength in Laser Sintering
Verlag:
LAP LAMBERT Academic Publishing, 2017
ISBN 10: 3330054867
ISBN 13: 9783330054868
Neu
Taschenbuch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Prototyping or model making is one of the important steps to finalize a product design. It helps in conceptualization of a design. Before the start of full production a prototype is usually fabricated and tested. RP processes namely Stereo-lithography (SL), Selective Laser Sintering (SLS), Fused Deposition Modelling (FDM) and Laminated Object Manufacturing (LOM) are described. In Selective Laser Sintering (SLS) process, fine polymeric powder like polystyrene, polycarbonate or polyamide etc. (20 to 100 micrometer diameter) is spread on the substrate using a roller. Before starting CO2 laser scanning for sintering of a slice the temperature of the entire bed is raised just below its melting point by infrared heating in order to minimize thermal distortion (curling) and facilitate fusion to the previous layer. The laser is modulated in such a way that only those grains, which are in direct contact with the beam, are affected. Once laser scanning cures a slice, bed is lowered and powder feed chamber is raised so that a covering of powder can be spread evenly over the build area by counter rotating roller. Bestandsnummer des Verkäufers 9783330054868
Neu kaufen
EUR 35,90
EUR 60,72 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Effect of Laser Power on Component Strength in Laser Sintering
Verlag:
LAP LAMBERT Academic Publishing, 2017
ISBN 10: 3330054867
ISBN 13: 9783330054868
Neu
Taschenbuch
Anbieter: preigu, Osnabrück, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Effect of Laser Power on Component Strength in Laser Sintering | Chandan Deep Singh (u. a.) | Taschenbuch | 84 S. | Englisch | 2017 | LAP LAMBERT Academic Publishing | EAN 9783330054868 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Bestandsnummer des Verkäufers 108749864
Neu kaufen
EUR 33,20
EUR 70,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 5 verfügbar