Verwandte Artikel zu Process Validation, Area and Equipment Qualification:...
Process Validation, Area and Equipment Qualification: Process validation of metformin HCL ER tablets in new equipment set up with equipment qualification, area qualification - Softcover
Inhaltsangabe
Manufacturing area with new equipment having high capacity compared to previous one (Production Line) i.e. FBD, RMG, Co Mill and Container Mixer. Manufacturing of Metformin ER 500mg tablets is planned to do in new area with new equipment. As the size and capacity of the equipments are bigger than previous equipments, batch size of Metformin ER tablets is increasing from 0.4 mio to 0.6 mio. As the production in new area and new equipment, qualification of area, equipment, water and air was carried out as per qualification protocol. Now, further the process of optimization was performed for Metformin ER tablets by identifying the critical Process parameters i.e. standardization batch (BATCH I). Before going to start process validation, one standardization batch was taken, where the process optimization of critical parameter like mixing speed, mixing time, lubrication time was carried out; fast, 15 min, 15 min respectively the results for that. Three process validation batches (PV-1, PV-2 and PV-3) of commercial batch size were taken in which Manufacturing Process, critical parameters, Validation status of equipments & Validation criteria’s were considered.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
I had done my b.pharma from east wast college of pharmacy, Bangalore and I done my m.pharma from shri b m shah college of pharmaceutical and research, modasa. I also attended 3 national seminar related to pharmacy profession and published 2 review article and 1 research article.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Neu kaufen
Diesen Artikel anzeigen
EUR 50,20
EUR 3,42 für den Versand innerhalb von/der USA
Versandziele, Kosten & DauerSuchergebnisse für Process Validation, Area and Equipment Qualification:...
Beispielbild für diese ISBN
Process Validation, Area and Equipment Qualification: Process validation of metformin HCL ER tablets in new equipment set up with equipment qualification, area qualification
Verlag:
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659405086
ISBN 13: 9783659405082
Neu
Softcover
Anbieter: Lucky's Textbooks, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Bestandsnummer des Verkäufers ABLIING23Mar3113020283988
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Process Validation, Area and Equipment Qualification Process validation of metformin HCL ER tablets in new equipment set up with equipment qualification, area qualification
Print-on-DemandAnbieter: PBShop.store US, Wood Dale, IL, USA
Verkäuferbewertung 5 von 5 Sternen
PAP. Zustand: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Bestandsnummer des Verkäufers L0-9783659405082
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Process Validation, Area and Equipment Qualification: Process validation of metformin HCL ER tablets in new equipment set up with equipment qualification, area qualification
Verlag:
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659405086
ISBN 13: 9783659405082
Neu
Softcover
Anbieter: California Books, Miami, FL, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Bestandsnummer des Verkäufers I-9783659405082
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Process Validation, Area and Equipment Qualification Process validation of metformin HCL ER tablets in new equipment set up with equipment qualification, area qualification
Print-on-DemandAnbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
PAP. Zustand: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Bestandsnummer des Verkäufers L0-9783659405082
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Process Validation, Area and Equipment Qualification: Process validation of metformin HCL ER tablets in new equipment set up with equipment qualification, area qualification
Verlag:
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659405086
ISBN 13: 9783659405082
Neu
Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. In. Bestandsnummer des Verkäufers ria9783659405082_new
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Process Validation, Area and Equipment Qualification: Process validation of metformin HCL ER tablets in new equipment set up with equipment qualification, area qualification
Verlag:
LAP LAMBERT Academic Publishing 2013-06-12, 2013
ISBN 10: 3659405086
ISBN 13: 9783659405082
Neu
Paperback
Anbieter: Chiron Media, Wallingford, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
Paperback. Zustand: New. Bestandsnummer des Verkäufers 6666-IUK-9783659405082
Anzahl: 10 verfügbar
Foto des Verkäufers
Process Validation, Area and Equipment Qualification
Verlag:
LAP LAMBERT Academic Publishing Jun 2013, 2013
ISBN 10: 3659405086
ISBN 13: 9783659405082
Neu
Taschenbuch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Manufacturing area with new equipment having high capacity compared to previous one (Production Line) i.e. FBD, RMG, Co Mill and Container Mixer. Manufacturing of Metformin ER 500mg tablets is planned to do in new area with new equipment. As the size and capacity of the equipments are bigger than previous equipments, batch size of Metformin ER tablets is increasing from 0.4 mio to 0.6 mio. As the production in new area and new equipment, qualification of area, equipment, water and air was carried out as per qualification protocol. Now, further the process of optimization was performed for Metformin ER tablets by identifying the critical Process parameters i.e. standardization batch (BATCH I). Before going to start process validation, one standardization batch was taken, where the process optimization of critical parameter like mixing speed, mixing time, lubrication time was carried out; fast, 15 min, 15 min respectively the results for that. Three process validation batches (PV-1, PV-2 and PV-3) of commercial batch size were taken in which Manufacturing Process, critical parameters, Validation status of equipments & Validation criteria's were considered. 96 pp. Englisch. Bestandsnummer des Verkäufers 9783659405082
Anzahl: 2 verfügbar
Foto des Verkäufers
Process Validation, Area and Equipment Qualification
Verlag:
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659405086
ISBN 13: 9783659405082
Neu
Softcover
Anbieter: moluna, Greven, Deutschland
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Patel MiteshI had done my b.pharma from east wast college of pharmacy, Bangalore and I done my m.pharma from shri b m shah college of pharmaceutical and research, modasa. I also attended 3 national seminar related to pharmacy profess. Bestandsnummer des Verkäufers 5154119
Anzahl: Mehr als 20 verfügbar
Foto des Verkäufers
Process Validation, Area and Equipment Qualification
Verlag:
LAP LAMBERT Academic Publishing Jun 2013, 2013
ISBN 10: 3659405086
ISBN 13: 9783659405082
Neu
Taschenbuch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Manufacturing area with new equipment having high capacity compared to previous one (Production Line) i.e. FBD, RMG, Co Mill and Container Mixer. Manufacturing of Metformin ER 500mg tablets is planned to do in new area with new equipment. As the size and capacity of the equipments are bigger than previous equipments, batch size of Metformin ER tablets is increasing from 0.4 mio to 0.6 mio. As the production in new area and new equipment, qualification of area, equipment, water and air was carried out as per qualification protocol. Now, further the process of optimization was performed for Metformin ER tablets by identifying the critical Process parameters i.e. standardization batch (BATCH I). Before going to start process validation, one standardization batch was taken, where the process optimization of critical parameter like mixing speed, mixing time, lubrication time was carried out; fast, 15 min, 15 min respectively the results for that. Three process validation batches (PV-1, PV-2 and PV-3) of commercial batch size were taken in which Manufacturing Process, critical parameters, Validation status of equipments & Validation criteriäs were considered.Books on Demand GmbH, Überseering 33, 22297 Hamburg 96 pp. Englisch. Bestandsnummer des Verkäufers 9783659405082
Anzahl: 1 verfügbar
Foto des Verkäufers
Process Validation, Area and Equipment Qualification : Process validation of metformin HCL ER tablets in new equipment set up with equipment qualification, area qualification
Verlag:
LAP LAMBERT Academic Publishing, 2013
ISBN 10: 3659405086
ISBN 13: 9783659405082
Neu
Taschenbuch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Manufacturing area with new equipment having high capacity compared to previous one (Production Line) i.e. FBD, RMG, Co Mill and Container Mixer. Manufacturing of Metformin ER 500mg tablets is planned to do in new area with new equipment. As the size and capacity of the equipments are bigger than previous equipments, batch size of Metformin ER tablets is increasing from 0.4 mio to 0.6 mio. As the production in new area and new equipment, qualification of area, equipment, water and air was carried out as per qualification protocol. Now, further the process of optimization was performed for Metformin ER tablets by identifying the critical Process parameters i.e. standardization batch (BATCH I). Before going to start process validation, one standardization batch was taken, where the process optimization of critical parameter like mixing speed, mixing time, lubrication time was carried out; fast, 15 min, 15 min respectively the results for that. Three process validation batches (PV-1, PV-2 and PV-3) of commercial batch size were taken in which Manufacturing Process, critical parameters, Validation status of equipments & Validation criteria's were considered. Bestandsnummer des Verkäufers 9783659405082
Anzahl: 1 verfügbar