Verwandte Artikel zu Flow Simulation (CFD) & Fatigue Analysis (FEA)...
Inhaltsangabe
In this book the CFD analysis of a centrifugal pump is done using k-ε turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pump
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Reseña del editor
In this book the CFD analysis of a centrifugal pump is done using k-ε turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pump
Biografía del autor
Manish Dadhich was born in Sri Ganganagar (Rajasthan,India). He completed his B.Tech (Honors) in Mechanical engineering from Rajasthan Technical University, Kota in year 2010 and M.Tech(Honors) in Thermal engineering from Rajasthan Technical University, Kota in year 2013.His area of research is CFD and FEA analysis.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
EUR 113,90
EUR 28,80 für den Versand von Vereinigtes Königreich nach Deutschland
Versandziele, Kosten & DauerNeu kaufen
Diesen Artikel anzeigen
EUR 45,45
Gratis für den Versand innerhalb von/der Deutschland
Versandziele, Kosten & DauerSuchergebnisse für Flow Simulation (CFD) & Fatigue Analysis (FEA)...
Foto des Verkäufers
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a Centrifugal Pump
Verlag:
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659611050
ISBN 13: 9783659611056
Neu
Softcover
Anbieter: moluna, Greven, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Dadhich ManishManish Dadhich was born in Sri Ganganagar (Rajasthan,India). He completed his B.Tech (Honors) in Mechanical engineering from Rajasthan Technical University, Kota in year 2010 and M.Tech(Honors) in Thermal engineering fr. Bestandsnummer des Verkäufers 5168203
Anzahl: Mehr als 20 verfügbar
Foto des Verkäufers
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a Centrifugal Pump
Verlag:
LAP LAMBERT Academic Publishing Sep 2014, 2014
ISBN 10: 3659611050
ISBN 13: 9783659611056
Neu
Taschenbuch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Neuware -In this book the CFD analysis of a centrifugal pump is done using k-¿ turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pumpBooks on Demand GmbH, Überseering 33, 22297 Hamburg 120 pp. Englisch. Bestandsnummer des Verkäufers 9783659611056
Anzahl: 2 verfügbar
Foto des Verkäufers
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a Centrifugal Pump
Verlag:
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659611050
ISBN 13: 9783659611056
Neu
Taschenbuch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this book the CFD analysis of a centrifugal pump is done using k- turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pump. Bestandsnummer des Verkäufers 9783659611056
Anzahl: 1 verfügbar
Foto des Verkäufers
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a Centrifugal Pump
Verlag:
LAP LAMBERT Academic Publishing Sep 2014, 2014
ISBN 10: 3659611050
ISBN 13: 9783659611056
Neu
Taschenbuch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this book the CFD analysis of a centrifugal pump is done using k- turbulent modeling and SIMPLEC algorithm from which the velocity and pressure contours are plotted for different operating conditions. In this work the mass flow rate is varied three times for two different fluids that are water and fuel oil. First the mass flow rate is decreased by 10% from the initial value of mass flow rate and then increased by 10% from the initial value of mass flow rate. Using the results of varying mass flow rate the efficiency at different mass flow rate is calculated. The results are compared with the theoretical results. Then the theoretical and software results are plotted in the operating characteristics curves and are verified. The deviation produced among them nearly 10% to 15 % is permissible. Then the rotational speed (RPM) is changed by decreasing and increasing by 10% and results are compared with the theoretical results and verified through characteristics curves. After the flow analysis the maximum pressure acting on the blades for the maximum efficiency in case of water and fuel oil are calculated from CFD analysis and the fatigue analysis (FEA) of the centrifugal pump 120 pp. Englisch. Bestandsnummer des Verkäufers 9783659611056
Anzahl: 2 verfügbar
Beispielbild für diese ISBN
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a Centrifugal Pump
Verlag:
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659611050
ISBN 13: 9783659611056
Neu
Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. In. Bestandsnummer des Verkäufers ria9783659611056_new
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Flow Simulation CFD Fatigue Analysis FEA of a Centrifugal Pump
Print-on-DemandAnbieter: PBShop.store US, Wood Dale, IL, USA
Verkäuferbewertung 5 von 5 Sternen
PAP. Zustand: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Bestandsnummer des Verkäufers L0-9783659611056
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Flow Simulation CFD Fatigue Analysis FEA of a Centrifugal Pump
Print-on-DemandAnbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
PAP. Zustand: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Bestandsnummer des Verkäufers L0-9783659611056
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a.
Verlag:
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659611050
ISBN 13: 9783659611056
Neu
Softcover
Anbieter: Books Puddle, New York, NY, USA
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. Bestandsnummer des Verkäufers 26359068591
Anzahl: 4 verfügbar
Beispielbild für diese ISBN
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a.
Verlag:
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659611050
ISBN 13: 9783659611056
Neu
Softcover
Anbieter: Biblios, Frankfurt am main, HESSE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. PRINT ON DEMAND. Bestandsnummer des Verkäufers 18359068581
Anzahl: 4 verfügbar
Beispielbild für diese ISBN
Flow Simulation (CFD) & Fatigue Analysis (FEA) of a.
Verlag:
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659611050
ISBN 13: 9783659611056
Neu
Softcover
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Print on Demand. Bestandsnummer des Verkäufers 353455216
Anzahl: 4 verfügbar