Inhaltsangabe
The need for innovation in the manufacturing industry to meet the consumer's fast changing preference has led to additive manufacturing (AM). Additive manufacturing works around the idea of material addition for product formation instead of conventional ways of subtracting material. Due to AM being an emerging technology, many procedures and processing parameters are not standardized, as it remained challenging for industries to produce parts that are defect free. Porosity level of the end product is of interest to the manufacturers as it reveals the material properties and microstructure of the end product. It is critical to all industries to ensure that the parts fabricated with AM are structurally sound and is safe for use in different types of operation. Thus, this book will investigate the use of non-destructive testing, specifically ultrasonic testing (UT), on metallic printed specimens for flaw detection and quantification of porosity content. This book will also do a comparison of UT against other non-destructive testing methods and conclude that the best technique used for flaw characterization in metallic three-dimensional (3D) printed specimens.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Dr B. Stephen Wong has been a lecturer in Nanyang Technological University, Singapore for 27 years, mostly with the School of Mechanical and Aerospace Engineering, where he presents course modules and conducts research in Non-Destructive Testing (NDT). His current position is Senior Research Fellow. Prior to this he worked for 11 years in the UK.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Suchergebnisse für Non-Destructive Testing of Metallic 3D Printed Specimens
Beispielbild für diese ISBN
NonDestructive Testing of Metallic 3D Printed Specimens
Print-on-DemandAnbieter: PBShop.store US, Wood Dale, IL, USA
Verkäuferbewertung 5 von 5 Sternen
PAP. Zustand: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Bestandsnummer des Verkäufers L0-9783659757549
Neu kaufen
EUR 37,32
Versand gratis
Versand innerhalb von USA
Versand innerhalb von USA
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
NonDestructive Testing of Metallic 3D Printed Specimens
Print-on-DemandAnbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
PAP. Zustand: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Bestandsnummer des Verkäufers L0-9783659757549
Neu kaufen
EUR 34,15
EUR 4,82 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Non-Destructive Testing of Metallic 3D Printed Specimens
Verlag:
LAP Lambert Academic Publishing, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Neu
Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. In. Bestandsnummer des Verkäufers ria9783659757549_new
Neu kaufen
EUR 32,86
EUR 13,87 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Non-Destructive Testing of Metallic 3D Printed Specimens
Verlag:
LAP Lambert Academic Publishing 2015-07-29, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Neu
Paperback
Anbieter: Chiron Media, Wallingford, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: New. Bestandsnummer des Verkäufers 6666-IUK-9783659757549
Neu kaufen
EUR 30,08
EUR 17,93 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: 10 verfügbar
Foto des Verkäufers
Non-Destructive Testing of Metallic 3D Printed Specimens
Verlag:
LAP LAMBERT Academic Publishing Jul 2015, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Neu
Taschenbuch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The need for innovation in the manufacturing industry to meet the consumer's fast changing preference has led to additive manufacturing (AM). Additive manufacturing works around the idea of material addition for product formation instead of conventional ways of subtracting material. Due to AM being an emerging technology, many procedures and processing parameters are not standardized, as it remained challenging for industries to produce parts that are defect free. Porosity level of the end product is of interest to the manufacturers as it reveals the material properties and microstructure of the end product. It is critical to all industries to ensure that the parts fabricated with AM are structurally sound and is safe for use in different types of operation. Thus, this book will investigate the use of non-destructive testing, specifically ultrasonic testing (UT), on metallic printed specimens for flaw detection and quantification of porosity content. This book will also do a comparison of UT against other non-destructive testing methods and conclude that the best technique used for flaw characterization in metallic three-dimensional (3D) printed specimens. 92 pp. Englisch. Bestandsnummer des Verkäufers 9783659757549
Neu kaufen
EUR 32,90
EUR 23,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 2 verfügbar
Foto des Verkäufers
Non-Destructive Testing of Metallic 3D Printed Specimens
Verlag:
LAP LAMBERT Academic Publishing, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Neu
Softcover
Anbieter: moluna, Greven, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Wong Brian StephenDr B. Stephen Wong has been a lecturer in Nanyang Technological University, Singapore for 27 years, mostly with the School of Mechanical and Aerospace Engineering, where he presents course modules and conducts resea. Bestandsnummer des Verkäufers 158876313
Neu kaufen
EUR 29,02
EUR 48,99 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: Mehr als 20 verfügbar
Foto des Verkäufers
Non-Destructive Testing of Metallic 3D Printed Specimens
Verlag:
LAP LAMBERT Academic Publishing Jul 2015, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Neu
Taschenbuch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The need for innovation in the manufacturing industry to meet the consumer¿s fast changing preference has led to additive manufacturing (AM). Additive manufacturing works around the idea of material addition for product formation instead of conventional ways of subtracting material. Due to AM being an emerging technology, many procedures and processing parameters are not standardized, as it remained challenging for industries to produce parts that are defect free. Porosity level of the end product is of interest to the manufacturers as it reveals the material properties and microstructure of the end product. It is critical to all industries to ensure that the parts fabricated with AM are structurally sound and is safe for use in different types of operation. Thus, this book will investigate the use of non-destructive testing, specifically ultrasonic testing (UT), on metallic printed specimens for flaw detection and quantification of porosity content. This book will also do a comparison of UT against other non-destructive testing methods and conclude that the best technique used for flaw characterization in metallic three-dimensional (3D) printed specimens.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 92 pp. Englisch. Bestandsnummer des Verkäufers 9783659757549
Neu kaufen
EUR 32,90
EUR 60,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Non-Destructive Testing of Metallic 3D Printed Specimens
Verlag:
LAP LAMBERT Academic Publishing, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Neu
Taschenbuch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The need for innovation in the manufacturing industry to meet the consumer's fast changing preference has led to additive manufacturing (AM). Additive manufacturing works around the idea of material addition for product formation instead of conventional ways of subtracting material. Due to AM being an emerging technology, many procedures and processing parameters are not standardized, as it remained challenging for industries to produce parts that are defect free. Porosity level of the end product is of interest to the manufacturers as it reveals the material properties and microstructure of the end product. It is critical to all industries to ensure that the parts fabricated with AM are structurally sound and is safe for use in different types of operation. Thus, this book will investigate the use of non-destructive testing, specifically ultrasonic testing (UT), on metallic printed specimens for flaw detection and quantification of porosity content. This book will also do a comparison of UT against other non-destructive testing methods and conclude that the best technique used for flaw characterization in metallic three-dimensional (3D) printed specimens. Bestandsnummer des Verkäufers 9783659757549
Neu kaufen
EUR 32,90
EUR 60,78 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Non-Destructive Testing of Metallic 3D Printed Specimens
Verlag:
LAP LAMBERT Academic Publishing, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Neu
Taschenbuch
Anbieter: preigu, Osnabrück, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Non-Destructive Testing of Metallic 3D Printed Specimens | Brian Stephen Wong (u. a.) | Taschenbuch | 92 S. | Englisch | 2015 | LAP LAMBERT Academic Publishing | EAN 9783659757549 | Verantwortliche Person für die EU: OmniScriptum GmbH & Co. KG, Bahnhofstr. 28, 66111 Saarbrücken, info[at]akademikerverlag[dot]de | Anbieter: preigu. Bestandsnummer des Verkäufers 104341507
Neu kaufen
EUR 29,40
EUR 70,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 5 verfügbar