Verwandte Artikel zu PATTERN DEVELOPMENT FOR HAND TOOL DIE WITH FUSED DEPOSITION...
Inhaltsangabe
Fused Deposition Modeling (FDM) is a relatively new prototyping technique in which parts can be produced rapidly and accurately.The present work started with the identification of the bench mark. Prototypes were built with ABS plastic material and measurements were made on the co-ordinate measuring machine from which IT grades were calculated to check the dimensional accuracy of the components. The purpose of this study is to find whether the FDM process is capable of producing a pattern for manufacturing a die for hand tool with good dimensional accuracy. The study involves best settings of machine by varying the part orientations and studying the effect on the consumption of the model material, support material and the time taken for production. Morphology of the components at various orientations was also studied to give an insight to the quality of the product produced at various orientations. Measured mechanical properties like micro hardness indicated the suitability of the process. Final components produced are acceptable as per ISO standard UNI EN 20286-I (1995) and DIN16901.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Rupinder Singh is working as an Associate Professor in Department of Production Engineering at Guru Nanak Dev Engineering College, Ludhiana, India. He has contributed about 150 research papers in journals, workshops and conferences at national/ international level. He has supervised 40 M.Tech theses.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Suchergebnisse für PATTERN DEVELOPMENT FOR HAND TOOL DIE WITH FUSED DEPOSITION...
Foto des Verkäufers
PATTERN DEVELOPMENT FOR HAND TOOL DIE WITH FUSED DEPOSITION MODELING
Verlag:
LAP LAMBERT Academic Publishing Apr 2011, 2011
ISBN 10: 3844325247
ISBN 13: 9783844325249
Neu
Taschenbuch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Fused Deposition Modeling (FDM) is a relatively new prototyping technique in which parts can be produced rapidly and accurately.The present work started with the identification of the bench mark. Prototypes were built with ABS plastic material and measurements were made on the co-ordinate measuring machine from which IT grades were calculated to check the dimensional accuracy of the components. The purpose of this study is to find whether the FDM process is capable of producing a pattern for manufacturing a die for hand tool with good dimensional accuracy. The study involves best settings of machine by varying the part orientations and studying the effect on the consumption of the model material, support material and the time taken for production. Morphology of the components at various orientations was also studied to give an insight to the quality of the product produced at various orientations. Measured mechanical properties like micro hardness indicated the suitability of the process. Final components produced are acceptable as per ISO standard UNI EN 20286-I (1995) and DIN16901. 108 pp. Englisch. Bestandsnummer des Verkäufers 9783844325249
Neu kaufen
EUR 49,00
EUR 23,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 2 verfügbar
Beispielbild für diese ISBN
Pattern Development for Hand Tool Die with Fused Deposition Modeling
Verlag:
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2011
ISBN 10: 3844325247
ISBN 13: 9783844325249
Neu
Softcover
Anbieter: Books Puddle, Woodside, NY, USA
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. pp. 108. Bestandsnummer des Verkäufers 26128887551
Neu kaufen
EUR 78,56
EUR 3,50 Versand
Versand innerhalb von USA
Versand innerhalb von USA
Anzahl: 4 verfügbar
Beispielbild für diese ISBN
Pattern Development for Hand Tool Die with Fused Deposition Modeling
Verlag:
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2011
ISBN 10: 3844325247
ISBN 13: 9783844325249
Neu
Softcover
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. Print on Demand pp. 108 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam. Bestandsnummer des Verkäufers 131667232
Neu kaufen
EUR 77,99
EUR 7,56 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: 4 verfügbar
Foto des Verkäufers
PATTERN DEVELOPMENT FOR HAND TOOL DIE WITH FUSED DEPOSITION MODELING : A CASE STUDY
Verlag:
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3844325247
ISBN 13: 9783844325249
Neu
Taschenbuch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Fused Deposition Modeling (FDM) is a relatively new prototyping technique in which parts can be produced rapidly and accurately.The present work started with the identification of the bench mark. Prototypes were built with ABS plastic material and measurements were made on the co-ordinate measuring machine from which IT grades were calculated to check the dimensional accuracy of the components. The purpose of this study is to find whether the FDM process is capable of producing a pattern for manufacturing a die for hand tool with good dimensional accuracy. The study involves best settings of machine by varying the part orientations and studying the effect on the consumption of the model material, support material and the time taken for production. Morphology of the components at various orientations was also studied to give an insight to the quality of the product produced at various orientations. Measured mechanical properties like micro hardness indicated the suitability of the process. Final components produced are acceptable as per ISO standard UNI EN 20286-I (1995) and DIN16901. Bestandsnummer des Verkäufers 9783844325249
Neu kaufen
EUR 51,71
EUR 35,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
Pattern Development for Hand Tool Die with Fused Deposition Modeling
Verlag:
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2011
ISBN 10: 3844325247
ISBN 13: 9783844325249
Neu
Softcover
Anbieter: Biblios, Frankfurt am main, HESSE, Deutschland
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. PRINT ON DEMAND pp. 108. Bestandsnummer des Verkäufers 18128887541
Neu kaufen
EUR 78,78
EUR 9,95 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 4 verfügbar
Foto des Verkäufers
PATTERN DEVELOPMENT FOR HAND TOOL DIE WITH FUSED DEPOSITION MODELING
Verlag:
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3844325247
ISBN 13: 9783844325249
Neu
Softcover
Anbieter: moluna, Greven, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Singh RupinderRupinder Singh is working as an Associate Professor in Department of Production Engineering at Guru Nanak Dev Engineering College, Ludhiana, India. He has contributed about 150 research papers in journals, workshops . Bestandsnummer des Verkäufers 5472938
Neu kaufen
EUR 41,05
EUR 48,99 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: Mehr als 20 verfügbar
Foto des Verkäufers
PATTERN DEVELOPMENT FOR HAND TOOL DIE WITH FUSED DEPOSITION MODELING
Verlag:
LAP LAMBERT Academic Publishing Apr 2011, 2011
ISBN 10: 3844325247
ISBN 13: 9783844325249
Neu
Taschenbuch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Fused Deposition Modeling (FDM) is a relatively new prototyping technique in which parts can be produced rapidly and accurately.The present work started with the identification of the bench mark. Prototypes were built with ABS plastic material and measurements were made on the co-ordinate measuring machine from which IT grades were calculated to check the dimensional accuracy of the components. The purpose of this study is to find whether the FDM process is capable of producing a pattern for manufacturing a die for hand tool with good dimensional accuracy. The study involves best settings of machine by varying the part orientations and studying the effect on the consumption of the model material, support material and the time taken for production. Morphology of the components at various orientations was also studied to give an insight to the quality of the product produced at various orientations. Measured mechanical properties like micro hardness indicated the suitability of the process. Final components produced are acceptable as per ISO standard UNI EN 20286-I (1995) and DIN16901.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 108 pp. Englisch. Bestandsnummer des Verkäufers 9783844325249
Neu kaufen
EUR 49,00
EUR 60,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Beispielbild für diese ISBN
PATTERN DEVELOPMENT FOR HAND TOOL DIE WITH FUSED DEPOSITION MODELING: A CASE STUDY
Verlag:
LAP LAMBERT Academic Publishing, 2011
ISBN 10: 3844325247
ISBN 13: 9783844325249
Gebraucht
Paperback
Anbieter: Mispah books, Redhill, SURRE, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
Paperback. Zustand: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book. Bestandsnummer des Verkäufers ERICA75838443252476
Gebraucht kaufen
EUR 120,96
EUR 29,07 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: 1 verfügbar