Verwandte Artikel zu Thermal Stresses Problems in a Rotating Disc: Research...
Thermal Stresses Problems in a Rotating Disc: Research Problems in Mechanical Engineering - Softcover
Inhaltsangabe
In this Book we discuss Problems in Rotating disc by using Seth's B. R. Transition theory. We discuss What is the effect of stresses having variable thickness and with edge loading.Rotating Disc having variable thickness with rigid shaft, It has been observed that in the absence of thickness, rotating disc with inclusion and made of compressible material yields at the internal surface at a lesser angular speed as compared to a rotating disc made of incompressible material whereas it requires a higher percentage increase in angular speed to become fully plastic. With the effect of variation thickness, higher angular speed is required to yield at the internal surface.When Rotating disc by finitesimal deformation with loading edge under steady state temperature,It has observed that for incompressible material required higher angular speed for initial yielding as compare to compressible material. With the effect of loading edge, lesser angular speed required for initial yielding as compare to without edge loading. With the introduction of thermal effect rotating disc with loading edge much required to lesser angular speed as compare to rotating disc without thermal effect.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Dr Pankaj, Sr. A.P. & Research Coordinator, Department Of Mathematics, Indus International University Una, Himachal Pradesh, India, Honorary Fellow awarded by Australian Institute of High Energetic Material, 2011 Editor in International Journal of Applied Science and Mechanical Engineering Journal.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Suchergebnisse für Thermal Stresses Problems in a Rotating Disc: Research...
Foto des Verkäufers
Thermal Stresses Problems in a Rotating Disc
Verlag:
LAP LAMBERT Academic Publishing Mrz 2012, 2012
ISBN 10: 3848421127
ISBN 13: 9783848421121
Neu
Taschenbuch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this Book we discuss Problems in Rotating disc by using Seth's B. R. Transition theory. We discuss What is the effect of stresses having variable thickness and with edge loading.Rotating Disc having variable thickness with rigid shaft, It has been observed that in the absence of thickness, rotating disc with inclusion and made of compressible material yields at the internal surface at a lesser angular speed as compared to a rotating disc made of incompressible material whereas it requires a higher percentage increase in angular speed to become fully plastic. With the effect of variation thickness, higher angular speed is required to yield at the internal surface.When Rotating disc by finitesimal deformation with loading edge under steady state temperature,It has observed that for incompressible material required higher angular speed for initial yielding as compare to compressible material. With the effect of loading edge, lesser angular speed required for initial yielding as compare to without edge loading. With the introduction of thermal effect rotating disc with loading edge much required to lesser angular speed as compare to rotating disc without thermal effect. 80 pp. Englisch. Bestandsnummer des Verkäufers 9783848421121
Neu kaufen
EUR 49,00
EUR 23,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 2 verfügbar
Foto des Verkäufers
Thermal Stresses Problems in a Rotating Disc : Research Problems in Mechanical Engineering
Verlag:
LAP LAMBERT Academic Publishing, 2012
ISBN 10: 3848421127
ISBN 13: 9783848421121
Neu
Taschenbuch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this Book we discuss Problems in Rotating disc by using Seth's B. R. Transition theory. We discuss What is the effect of stresses having variable thickness and with edge loading.Rotating Disc having variable thickness with rigid shaft, It has been observed that in the absence of thickness, rotating disc with inclusion and made of compressible material yields at the internal surface at a lesser angular speed as compared to a rotating disc made of incompressible material whereas it requires a higher percentage increase in angular speed to become fully plastic. With the effect of variation thickness, higher angular speed is required to yield at the internal surface.When Rotating disc by finitesimal deformation with loading edge under steady state temperature,It has observed that for incompressible material required higher angular speed for initial yielding as compare to compressible material. With the effect of loading edge, lesser angular speed required for initial yielding as compare to without edge loading. With the introduction of thermal effect rotating disc with loading edge much required to lesser angular speed as compare to rotating disc without thermal effect. Bestandsnummer des Verkäufers 9783848421121
Neu kaufen
EUR 49,00
EUR 35,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Thermal Stresses Problems in a Rotating Disc
Verlag:
LAP LAMBERT Academic Publishing, 2012
ISBN 10: 3848421127
ISBN 13: 9783848421121
Neu
Softcover
Anbieter: moluna, Greven, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Thakur PankajDr Pankaj, Sr. Assistant Professor & Research Coordinator,Department of Mathematics,Indus International University Bathu, Distt. Una, India (H.P),Honorary Fellow Australian Institu. Bestandsnummer des Verkäufers 5520964
Neu kaufen
EUR 41,05
EUR 48,99 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: Mehr als 20 verfügbar
Foto des Verkäufers
Thermal Stresses Problems in a Rotating Disc
Verlag:
LAP LAMBERT Academic Publishing Mär 2012, 2012
ISBN 10: 3848421127
ISBN 13: 9783848421121
Neu
Taschenbuch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In this Book we discuss Problems in Rotating disc by using Seth's B. R. Transition theory. We discuss What is the effect of stresses having variable thickness and with edge loading.Rotating Disc having variable thickness with rigid shaft, It has been observed that in the absence of thickness, rotating disc with inclusion and made of compressible material yields at the internal surface at a lesser angular speed as compared to a rotating disc made of incompressible material whereas it requires a higher percentage increase in angular speed to become fully plastic. With the effect of variation thickness, higher angular speed is required to yield at the internal surface.When Rotating disc by finitesimal deformation with loading edge under steady state temperature,It has observed that for incompressible material required higher angular speed for initial yielding as compare to compressible material. With the effect of loading edge, lesser angular speed required for initial yielding as compare to without edge loading. With the introduction of thermal effect rotating disc with loading edge much required to lesser angular speed as compare to rotating disc without thermal effect.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 80 pp. Englisch. Bestandsnummer des Verkäufers 9783848421121
Neu kaufen
EUR 49,00
EUR 60,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Thermal Stresses Problems in a Rotating Disc | Research Problems in Mechanical Engineering
Verlag:
LAP LAMBERT Academic Publishing, 2012
ISBN 10: 3848421127
ISBN 13: 9783848421121
Neu
Taschenbuch
Anbieter: preigu, Osnabrück, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Thermal Stresses Problems in a Rotating Disc | Research Problems in Mechanical Engineering | Pankaj Thakur | Taschenbuch | 80 S. | Englisch | 2012 | LAP LAMBERT Academic Publishing | EAN 9783848421121 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu. Bestandsnummer des Verkäufers 106577301
Neu kaufen
EUR 43,40
EUR 70,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 5 verfügbar
Beispielbild für diese ISBN
Thermal Stresses Problems in a Rotating Disc: Research Problems in Mechanical Engineering
Verlag:
LAP LAMBERT Academic Publishing, 2012
ISBN 10: 3848421127
ISBN 13: 9783848421121
Gebraucht
Paperback
Anbieter: Mispah books, Redhill, SURRE, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
Paperback. Zustand: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book. Bestandsnummer des Verkäufers ERICA77338484211276
Gebraucht kaufen
EUR 122,92
EUR 29,54 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: 1 verfügbar