This work demonstrates the calculation of the bending from a bi-supported beam and compares the manual method versus the calculation carried out with the aid of a software based on the finite element method (FEM), both are verified based on the Brazilian standard NBR 6118 (2014). The comparison consists in the analysis of the diagrams of shearing forces, bending moments, calculated steel area and deformation in the beams. It is noticeable that in the manual calculation, it considers only the distance between the center of the supports. On the other hand, the calculation from the program (FEM) is realized by the consideration of structural dimensioning of the beam in relation to the span between the center of support pillars and the support width. Thus reaching the conclusion, that increasing the support width of the pillars, despite contributing to the reduction of shearing forces, bending moments and deformations, it’s not economically viable for this structure calculated in this work, because of the use of minimum reinforcement for the calculated cross-sectional area of the beam.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Edson F. Castanheira Rodrigues: Civil Engineer and Master's Degree student in the postgraduate program PPGECiv of UFSCar University. André L. Christoforo: Civil Engineer, PhD in Structural Engineering and professor at UFSCar University. Túlio Hallak Panzera: Mechanical Engineer, PhD in Mechanical Engineering and Professor at UFSJ University.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This work demonstrates the calculation of the bending from a bi-supported beam and compares the manual method versus the calculation carried out with the aid of a software based on the finite element method (FEM), both are verified based on the Brazilian standard NBR 6118 (2014). The comparison consists in the analysis of the diagrams of shearing forces, bending moments, calculated steel area and deformation in the beams. It is noticeable that in the manual calculation, it considers only the distance between the center of the supports. On the other hand, the calculation from the program (FEM) is realized by the consideration of structural dimensioning of the beam in relation to the span between the center of support pillars and the support width. Thus reaching the conclusion, that increasing the support width of the pillars, despite contributing to the reduction of shearing forces, bending moments and deformations, it's not economically viable for this structure calculated in this work, because of the use of minimum reinforcement for the calculated cross-sectional area of the beam. 56 pp. Englisch. Bestandsnummer des Verkäufers 9786200080844
Anzahl: 2 verfügbar
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Paperback. Zustand: Brand New. 56 pages. 8.66x5.91x0.13 inches. In Stock. Bestandsnummer des Verkäufers zk6200080844
Anzahl: 1 verfügbar
Anbieter: moluna, Greven, Deutschland
Zustand: New. Bestandsnummer des Verkäufers 289724434
Anzahl: Mehr als 20 verfügbar
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This work demonstrates the calculation of the bending from a bi-supported beam and compares the manual method versus the calculation carried out with the aid of a software based on the finite element method (FEM), both are verified based on the Brazilian standard NBR 6118 (2014). The comparison consists in the analysis of the diagrams of shearing forces, bending moments, calculated steel area and deformation in the beams. It is noticeable that in the manual calculation, it considers only the distance between the center of the supports. On the other hand, the calculation from the program (FEM) is realized by the consideration of structural dimensioning of the beam in relation to the span between the center of support pillars and the support width. Thus reaching the conclusion, that increasing the support width of the pillars, despite contributing to the reduction of shearing forces, bending moments and deformations, it's not economically viable for this structure calculated in this work, because of the use of minimum reinforcement for the calculated cross-sectional area of the beam.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 56 pp. Englisch. Bestandsnummer des Verkäufers 9786200080844
Anzahl: 1 verfügbar
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This work demonstrates the calculation of the bending from a bi-supported beam and compares the manual method versus the calculation carried out with the aid of a software based on the finite element method (FEM), both are verified based on the Brazilian standard NBR 6118 (2014). The comparison consists in the analysis of the diagrams of shearing forces, bending moments, calculated steel area and deformation in the beams. It is noticeable that in the manual calculation, it considers only the distance between the center of the supports. On the other hand, the calculation from the program (FEM) is realized by the consideration of structural dimensioning of the beam in relation to the span between the center of support pillars and the support width. Thus reaching the conclusion, that increasing the support width of the pillars, despite contributing to the reduction of shearing forces, bending moments and deformations, it's not economically viable for this structure calculated in this work, because of the use of minimum reinforcement for the calculated cross-sectional area of the beam. Bestandsnummer des Verkäufers 9786200080844
Anzahl: 1 verfügbar
Anbieter: preigu, Osnabrück, Deutschland
Taschenbuch. Zustand: Neu. Calculation Methods Applied in the Design of Reinforced Concrete Beams | Edson Fernando Castanheira Rodrigues (u. a.) | Taschenbuch | 56 S. | Englisch | 2019 | LAP LAMBERT Academic Publishing | EAN 9786200080844 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Bestandsnummer des Verkäufers 116760585
Anzahl: 5 verfügbar