Inhaltsangabe
Wire cut Electric Discharge Machining (WEDM) is an vital technology, which is required for high – speed cutting and high – precision machining to enhance productivity and accuracy for manufacturing of press tools, moulds, prototype parts and complicated contours etc. The machining system involves many input parameters effecting output. The main objective of this work is to determine the optimum values of machining parameters for attaining economical and competent performance for machining Al6061 / MoS2 metal matrix composite (MMC). The MMC material was made by stir casting process and the specimen were prepared for machining as well as testing. The cutting operations were carried out on WEDM by varying the machining current on work pieces of thickness ranging from 5mm to 80mm. The surface roughness value was measured using Talysurf. The material removal rate (MRR) was computed by measuring cutting width using Profile projector. The optimal current value at which the machining is stable with high cutting speed is identified. Mathematical correlations are developed to determine the cutting parameters, the MRR and Surface roughness by using Origin software.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Dr. Geeta Rani is currently working as a teaching faculty in ALIET, Vijayawada.She odtained her bachelors degree from JNTU , Hyderbad, Master Degree from VR Siddhartha Engg. College and Ph.D from K L University, Vijayawada. & Dr. Rao is currently working as a principal & Professor in NEC, Gudur., Andhrapradesh.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Suchergebnisse für Development of Al -MoS2 MMC and modelling of machining...
Foto des Verkäufers
Development of Al -MoS2 MMC and modelling of machining parameters with
Verlag:
LAP LAMBERT Academic Publishing Apr 2020, 2020
ISBN 10: 6202524839
ISBN 13: 9786202524834
Neu
Taschenbuch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Wire cut Electric Discharge Machining (WEDM) is an vital technology, which is required for high - speed cutting and high - precision machining to enhance productivity and accuracy for manufacturing of press tools, moulds, prototype parts and complicated contours etc. The machining system involves many input parameters effecting output. The main objective of this work is to determine the optimum values of machining parameters for attaining economical and competent performance for machining Al6061 / MoS2 metal matrix composite (MMC). The MMC material was made by stir casting process and the specimen were prepared for machining as well as testing. The cutting operations were carried out on WEDM by varying the machining current on work pieces of thickness ranging from 5mm to 80mm. The surface roughness value was measured using Talysurf. The material removal rate (MRR) was computed by measuring cutting width using Profile projector. The optimal current value at which the machining is stable with high cutting speed is identified. Mathematical correlations are developed to determine the cutting parameters, the MRR and Surface roughness by using Origin software. 120 pp. Englisch. Bestandsnummer des Verkäufers 9786202524834
Neu kaufen
EUR 54,90
EUR 23,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 2 verfügbar
Beispielbild für diese ISBN
Development of Al -MoS2 MMC and modelling of machining parameters with
Verlag:
LAP LAMBERT Academic Publishing, 2020
ISBN 10: 6202524839
ISBN 13: 9786202524834
Neu
Softcover
Anbieter: Books Puddle, New York, NY, USA
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. Bestandsnummer des Verkäufers 26386767449
Neu kaufen
EUR 86,95
EUR 3,46 Versand
Versand innerhalb von USA
Versand innerhalb von USA
Anzahl: 4 verfügbar
Beispielbild für diese ISBN
Development of Al -MoS2 MMC and modelling of machining parameters with
Verlag:
LAP LAMBERT Academic Publishing, 2020
ISBN 10: 6202524839
ISBN 13: 9786202524834
Neu
Softcover
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. Print on Demand. Bestandsnummer des Verkäufers 393880966
Neu kaufen
EUR 86,28
EUR 7,52 Versand
Versand von Vereinigtes Königreich nach USA
Versand von Vereinigtes Königreich nach USA
Anzahl: 4 verfügbar
Foto des Verkäufers
Development of Al -MoS2 MMC and modelling of machining parameters with
Verlag:
LAP LAMBERT Academic Publishing, 2020
ISBN 10: 6202524839
ISBN 13: 9786202524834
Neu
Softcover
Anbieter: moluna, Greven, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Madireddy Geeta RaniDr. Geeta Rani is currently working as a teaching faculty in ALIET, Vijayawada.She odtained her bachelors degree from JNTU , Hyderbad, Master Degree from VR Siddhartha Engg. College and Ph.D from K L University, V. Bestandsnummer des Verkäufers 385946192
Neu kaufen
EUR 45,45
EUR 48,99 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: Mehr als 20 verfügbar
Beispielbild für diese ISBN
Development of Al -MoS2 MMC and modelling of machining parameters with
Verlag:
LAP LAMBERT Academic Publishing, 2020
ISBN 10: 6202524839
ISBN 13: 9786202524834
Neu
Softcover
Anbieter: Biblios, Frankfurt am main, HESSE, Deutschland
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. PRINT ON DEMAND. Bestandsnummer des Verkäufers 18386767443
Neu kaufen
EUR 87,45
EUR 9,95 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 4 verfügbar
Foto des Verkäufers
Development of Al -MoS2 MMC and modelling of machining parameters with
Verlag:
LAP LAMBERT Academic Publishing Apr 2020, 2020
ISBN 10: 6202524839
ISBN 13: 9786202524834
Neu
Taschenbuch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Wire cut Electric Discharge Machining (WEDM) is an vital technology, which is required for high - speed cutting and high - precision machining to enhance productivity and accuracy for manufacturing of press tools, moulds, prototype parts and complicated contours etc. The machining system involves many input parameters effecting output. The main objective of this work is to determine the optimum values of machining parameters for attaining economical and competent performance for machining Al6061 / MoS2 metal matrix composite (MMC). The MMC material was made by stir casting process and the specimen were prepared for machining as well as testing. The cutting operations were carried out on WEDM by varying the machining current on work pieces of thickness ranging from 5mm to 80mm. The surface roughness value was measured using Talysurf. The material removal rate (MRR) was computed by measuring cutting width using Profile projector. The optimal current value at which the machining is stable with high cutting speed is identified. Mathematical correlations are developed to determine the cutting parameters, the MRR and Surface roughness by using Origin software.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 120 pp. Englisch. Bestandsnummer des Verkäufers 9786202524834
Neu kaufen
EUR 54,90
EUR 60,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Development of Al -MoS2 MMC and modelling of machining parameters with
Verlag:
LAP LAMBERT Academic Publishing, 2020
ISBN 10: 6202524839
ISBN 13: 9786202524834
Neu
Taschenbuch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Wire cut Electric Discharge Machining (WEDM) is an vital technology, which is required for high - speed cutting and high - precision machining to enhance productivity and accuracy for manufacturing of press tools, moulds, prototype parts and complicated contours etc. The machining system involves many input parameters effecting output. The main objective of this work is to determine the optimum values of machining parameters for attaining economical and competent performance for machining Al6061 / MoS2 metal matrix composite (MMC). The MMC material was made by stir casting process and the specimen were prepared for machining as well as testing. The cutting operations were carried out on WEDM by varying the machining current on work pieces of thickness ranging from 5mm to 80mm. The surface roughness value was measured using Talysurf. The material removal rate (MRR) was computed by measuring cutting width using Profile projector. The optimal current value at which the machining is stable with high cutting speed is identified. Mathematical correlations are developed to determine the cutting parameters, the MRR and Surface roughness by using Origin software. Bestandsnummer des Verkäufers 9786202524834
Neu kaufen
EUR 55,56
EUR 60,99 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Development of Al -MoS2 MMC and modelling of machining parameters with
Verlag:
LAP LAMBERT Academic Publishing, 2020
ISBN 10: 6202524839
ISBN 13: 9786202524834
Neu
Taschenbuch
Anbieter: preigu, Osnabrück, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Development of Al -MoS2 MMC and modelling of machining parameters with | Geeta Rani Madireddy (u. a.) | Taschenbuch | 120 S. | Englisch | 2020 | LAP LAMBERT Academic Publishing | EAN 9786202524834 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu. Bestandsnummer des Verkäufers 118391039
Neu kaufen
EUR 47,85
EUR 70,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 5 verfügbar