Effect of Friction Stir Processing on Spray Formed Al-Si Alloy: Effect of FSP on Spray Formed Al-Si Alloy - Softcover
Inhaltsangabe
In this study, Al-Si-Gr composites for cylinder liner application were synthesized using a spray forming technique to improve its wear resistance. The processing of these composites by the conventional casting routes is complicated due to liquid immiscibility and floating of low-density graphite powder during melt solidification. In the present investigation, Al-Si-Gr composite is produced by spray forming, and then friction stir processing (FSP) was introduced to refine the microstructure of spray formed composite. The current research work aims to study the Al-Si alloy using graphite and examine the changes produced in microstructure and mechanical properties of the material after FSP. Disc shape spray deposit castings were made of Al–6Si-5Gr, Al-12Si-5Gr and Al–18Si-5Gr composite. In addition to that, spray formed Al-Si-Gr composites were subjected to the FSP. The microstructure of the stir zone was observed to be highly refined compared to the spray formed material. FSP resulted in complete homogenization and elimination of casting defects, especially porosity. Mechanical properties like hardness and tensile strength were sharply improved after FSP.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Über die Autorin bzw. den Autor
Prof. Abhijeet Bajpai machte seinen Abschluss am REC, Rewa, M.P, Indien. Er erhielt seinen MTech vom IIT, Roorkee, Indien.Dr. Devendra Singh erwarb seinen B. Tech-, MTech- und Ph.D.-Abschluss am IIT, Kanpur, Indien.Dr. Raj Kumar Singh machte seinen Abschluss am TIT, Bhopal. Er erhielt seinen MTech & PhD-Abschluss von MANIT, Bhopal, Indien.
„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.
Suchergebnisse für Effect of Friction Stir Processing on Spray Formed...
Foto des Verkäufers
Effect of Friction Stir Processing on Spray Formed Al-Si Alloy
Verlag:
LAP LAMBERT Academic Publishing Jan 2021, 2021
ISBN 10: 6203303054
ISBN 13: 9786203303056
Neu
Taschenbuch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this study, Al-Si-Gr composites for cylinder liner application were synthesized using a spray forming technique to improve its wear resistance. The processing of these composites by the conventional casting routes is complicated due to liquid immiscibility and floating of low-density graphite powder during melt solidification. In the present investigation, Al-Si-Gr composite is produced by spray forming, and then friction stir processing (FSP) was introduced to refine the microstructure of spray formed composite. The current research work aims to study the Al-Si alloy using graphite and examine the changes produced in microstructure and mechanical properties of the material after FSP. Disc shape spray deposit castings were made of Al-6Si-5Gr, Al-12Si-5Gr and Al-18Si-5Gr composite. In addition to that, spray formed Al-Si-Gr composites were subjected to the FSP. The microstructure of the stir zone was observed to be highly refined compared to the spray formed material. FSP resulted in complete homogenization and elimination of casting defects, especially porosity. Mechanical properties like hardness and tensile strength were sharply improved after FSP. 68 pp. Englisch. Bestandsnummer des Verkäufers 9786203303056
Neu kaufen
EUR 39,90
EUR 23,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 2 verfügbar
Foto des Verkäufers
Effect of Friction Stir Processing on Spray Formed Al-Si Alloy
Verlag:
LAP LAMBERT Academic Publishing, 2021
ISBN 10: 6203303054
ISBN 13: 9786203303056
Neu
Softcover
Anbieter: moluna, Greven, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Bajpai AbhijeetProf. Abhijeet Bajpai graduated from REC, Rewa, M.P, India. He obtained his MTech from IIT, Roorkee, India.Dr Devendra Singh obtained his B. Tech, MTech & Ph.D. degree from IIT, Kanpur, India.Dr Raj Kumar Singh graduat. Bestandsnummer des Verkäufers 452579491
Neu kaufen
EUR 34,25
EUR 48,99 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: Mehr als 20 verfügbar
Foto des Verkäufers
Effect of Friction Stir Processing on Spray Formed Al-Si Alloy
Verlag:
LAP LAMBERT Academic Publishing Jan 2021, 2021
ISBN 10: 6203303054
ISBN 13: 9786203303056
Neu
Taschenbuch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In this study, Al-Si-Gr composites for cylinder liner application were synthesized using a spray forming technique to improve its wear resistance. The processing of these composites by the conventional casting routes is complicated due to liquid immiscibility and floating of low-density graphite powder during melt solidification. In the present investigation, Al-Si-Gr composite is produced by spray forming, and then friction stir processing (FSP) was introduced to refine the microstructure of spray formed composite. The current research work aims to study the Al-Si alloy using graphite and examine the changes produced in microstructure and mechanical properties of the material after FSP. Disc shape spray deposit castings were made of Al-6Si-5Gr, Al-12Si-5Gr and Al-18Si-5Gr composite. In addition to that, spray formed Al-Si-Gr composites were subjected to the FSP. The microstructure of the stir zone was observed to be highly refined compared to the spray formed material. FSP resulted in complete homogenization and elimination of casting defects, especially porosity. Mechanical properties like hardness and tensile strength were sharply improved after FSP.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 68 pp. Englisch. Bestandsnummer des Verkäufers 9786203303056
Neu kaufen
EUR 39,90
EUR 60,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Effect of Friction Stir Processing on Spray Formed Al-Si Alloy : Effect of FSP on Spray Formed Al-Si Alloy
Verlag:
LAP LAMBERT Academic Publishing, 2021
ISBN 10: 6203303054
ISBN 13: 9786203303056
Neu
Taschenbuch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this study, Al-Si-Gr composites for cylinder liner application were synthesized using a spray forming technique to improve its wear resistance. The processing of these composites by the conventional casting routes is complicated due to liquid immiscibility and floating of low-density graphite powder during melt solidification. In the present investigation, Al-Si-Gr composite is produced by spray forming, and then friction stir processing (FSP) was introduced to refine the microstructure of spray formed composite. The current research work aims to study the Al-Si alloy using graphite and examine the changes produced in microstructure and mechanical properties of the material after FSP. Disc shape spray deposit castings were made of Al-6Si-5Gr, Al-12Si-5Gr and Al-18Si-5Gr composite. In addition to that, spray formed Al-Si-Gr composites were subjected to the FSP. The microstructure of the stir zone was observed to be highly refined compared to the spray formed material. FSP resulted in complete homogenization and elimination of casting defects, especially porosity. Mechanical properties like hardness and tensile strength were sharply improved after FSP. Bestandsnummer des Verkäufers 9786203303056
Neu kaufen
EUR 40,89
EUR 60,60 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 1 verfügbar
Foto des Verkäufers
Effect of Friction Stir Processing on Spray Formed Al-Si Alloy | Effect of FSP on Spray Formed Al-Si Alloy
Verlag:
LAP LAMBERT Academic Publishing, 2021
ISBN 10: 6203303054
ISBN 13: 9786203303056
Neu
Taschenbuch
Anbieter: preigu, Osnabrück, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Effect of Friction Stir Processing on Spray Formed Al-Si Alloy | Effect of FSP on Spray Formed Al-Si Alloy | Abhijeet Bajpai (u. a.) | Taschenbuch | Englisch | 2021 | LAP LAMBERT Academic Publishing | EAN 9786203303056 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Bestandsnummer des Verkäufers 119667651
Neu kaufen
EUR 36,35
EUR 70,00 Versand
Versand von Deutschland nach USA
Versand von Deutschland nach USA
Anzahl: 5 verfügbar