Verwandte Artikel zu Fabrication and Optimization of 3D Printed Biomaterials
Inhaltsangabe
This work aims to apprise the reader about how to optimize the properties of biomaterials named as PLA (polylactic acid), ABS (acrylonitrile-butadiene-styrene) and PETG (polyethylene terephthalate glycol). Polymer samples of bio-materials PLA, ABS and PETG are fabricated and then checked for tensile strength, compressive strength, surface hardness and impact strength. Test results are used to optimize the response parameters using Taguchi philosophy. Fabrication of polymer samples of PLA, ABS and PETG is done by varying different input parameters, i.e. material of printing, number of the walls, and percentage density of samples. Later, output parameters such as tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml) were measured. Experimental results were then processed as per Taguchi method to find the optimal settings of input parameters which can produce optimized tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml). Optimal configurations for input parameters are found to be PLA in material, six number of the walls and 60% density of samples.
Die Inhaltsangabe kann sich auf eine andere Ausgabe dieses Titels beziehen.
Neu kaufen
Diesen Artikel anzeigen
EUR 34,25
Gratis für den Versand innerhalb von/der Deutschland
Versandziele, Kosten & DauerSuchergebnisse für Fabrication and Optimization of 3D Printed Biomaterials
Foto des Verkäufers
Fabrication and Optimization of 3D Printed Biomaterials
Verlag:
LAP LAMBERT Academic Publishing, 2021
ISBN 10: 620392718X
ISBN 13: 9786203927184
Neu
Softcover
Anbieter: moluna, Greven, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Zustand: New. Bestandsnummer des Verkäufers 490936235
Anzahl: Mehr als 20 verfügbar
Foto des Verkäufers
Fabrication and Optimization of 3D Printed Biomaterials
Verlag:
LAP LAMBERT Academic Publishing Jun 2021, 2021
ISBN 10: 620392718X
ISBN 13: 9786203927184
Neu
Taschenbuch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This work aims to apprise the reader about how to optimize the properties of biomaterials named as PLA (polylactic acid), ABS (acrylonitrile-butadiene-styrene) and PETG (polyethylene terephthalate glycol). Polymer samples of bio-materials PLA, ABS and PETG are fabricated and then checked for tensile strength, compressive strength, surface hardness and impact strength. Test results are used to optimize the response parameters using Taguchi philosophy. Fabrication of polymer samples of PLA, ABS and PETG is done by varying different input parameters, i.e. material of printing, number of the walls, and percentage density of samples. Later, output parameters such as tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml) were measured. Experimental results were then processed as per Taguchi method to find the optimal settings of input parameters which can produce optimized tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml). Optimal configurations for input parameters are found to be PLA in material, six number of the walls and 60% density of samples. 64 pp. Englisch. Bestandsnummer des Verkäufers 9786203927184
Anzahl: 2 verfügbar
Foto des Verkäufers
Fabrication and Optimization of 3D Printed Biomaterials
Verlag:
LAP LAMBERT Academic Publishing Jun 2021, 2021
ISBN 10: 620392718X
ISBN 13: 9786203927184
Neu
Taschenbuch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Neuware -This work aims to apprise the reader about how to optimize the properties of biomaterials named as PLA (polylactic acid), ABS (acrylonitrile-butadiene-styrene) and PETG (polyethylene terephthalate glycol). Polymer samples of bio-materials PLA, ABS and PETG are fabricated and then checked for tensile strength, compressive strength, surface hardness and impact strength. Test results are used to optimize the response parameters using Taguchi philosophy. Fabrication of polymer samples of PLA, ABS and PETG is done by varying different input parameters, i.e. material of printing, number of the walls, and percentage density of samples. Later, output parameters such as tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml) were measured. Experimental results were then processed as per Taguchi method to find the optimal settings of input parameters which can produce optimized tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml). Optimal configurations for input parameters are found to be PLA in material, six number of the walls and 60% density of samples.Books on Demand GmbH, Überseering 33, 22297 Hamburg 64 pp. Englisch. Bestandsnummer des Verkäufers 9786203927184
Anzahl: 2 verfügbar
Foto des Verkäufers
Fabrication and Optimization of 3D Printed Biomaterials
Verlag:
LAP LAMBERT Academic Publishing, 2021
ISBN 10: 620392718X
ISBN 13: 9786203927184
Neu
Taschenbuch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This work aims to apprise the reader about how to optimize the properties of biomaterials named as PLA (polylactic acid), ABS (acrylonitrile-butadiene-styrene) and PETG (polyethylene terephthalate glycol). Polymer samples of bio-materials PLA, ABS and PETG are fabricated and then checked for tensile strength, compressive strength, surface hardness and impact strength. Test results are used to optimize the response parameters using Taguchi philosophy. Fabrication of polymer samples of PLA, ABS and PETG is done by varying different input parameters, i.e. material of printing, number of the walls, and percentage density of samples. Later, output parameters such as tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml) were measured. Experimental results were then processed as per Taguchi method to find the optimal settings of input parameters which can produce optimized tensile strength (N), compressive strength (N), impact strength (J), surface hardness (BHN) and density (g/ml). Optimal configurations for input parameters are found to be PLA in material, six number of the walls and 60% density of samples. Bestandsnummer des Verkäufers 9786203927184
Anzahl: 1 verfügbar