Tool life and surface integrity when hard turning stainless steel using wiper coated carbide tool

Sprache: Englisch

Verlag: GRIN Verlag, GRIN Verlag Mai 2012, 2012

3656193231 / 9783656193234

Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, DeutschlandBuchWeltWeit Ludwig Meier e.K.

Verkäufer/-in mit 5 Sternen

AbeBooks-Verkäufer/-in seit 11. Januar 2012

Artikel dieses Verkäufers ansehen
Softcover

Zustand: Neu

EUR 47,95

EUR 23,00 Versand 
Versand von Deutschland nach USA

Anzahl: 2 verfügbar

In den Warenkorb
Kostenlose Rückgaben innerhalb von 30 Tagen

Artikelbeschreibung vom Verkäufer

This item is printed on demand - it takes 3-4 days longer - Neuware -Master's Thesis from the year 2008 in the subject Engineering - Mechanical Engineering, grade: Satisfactory, University College of Technology and Innovation, Malaysia (Universiti Teknologi Malaysia), language: English, abstract: The feasibility of implementing hard turning partially depends on the performance of the cutting tool in generating the required machined parts. Since process efficiency is a continuous pursue, there is always a need of having inexpensive cutting tools able to deliver the expected quality of machined surfaces and having reasonable life times. For this purpose, the selection of cutting conditions and its performance are important. In this study, a carbide tool with TiAlN coating is proposed as the low cost alternative for performing moderate range of hard turning. Specifically, a coated carbide tool with wiper geometry was used to machine hardened martensitic stainless steel (47 - 48 HRC). The tool's performance is evaluated based on its tool life and the resulting surface finish when hard turning at various cutting speeds (100, 130, and 170 m/min) and feeds (0.125, 0.16, 0.2, and 0.25 mm/rev) and at constant depth of cut of 0.4 mm under dry condition. Further observation was made on the worn tool, the machined surface, and the generated chip. The wiper coated carbide tool lasts mostly beyond 2 minutes and even reaches a maximum of almost 18 minutes of service life time.Combination of abrasion and diffusion are suggested to be the main wear mechanisms of the cutting tool. The resulting surface finish is very fine, being entirely finer than 0.8 mim in Ra which is one level better than the theoretically expected value. Empirical models are developed to quantify the effect of cutting speed and feed to the tool life and Ra. Further observation at the optimum processparameter combination, for example the lowest cutting speed-lowest feed, reveals minimum machining-induced surface microstruct 108 pp. Englisch.

Bestandsnummer des Verkäufers 9783656193234

Titel
Tool life and surface integrity when hard turning stainless steel using wiper coated carbide tool
Autor
Denni Kurniawan
Verlag
GRIN Verlag, GRIN Verlag Mai 2012
Veröffentlichungsjahr
2012
Zustand
Neu
Einband
Taschenbuch
Sprache
Englisch
ISBN-10
3656193231
ISBN-13
9783656193234
Artikelgewicht
169 Gramm
Abmessungen
210x148x8 mm

BuchWeltWeit Ludwig Meier e.K.

Bergisch Gladbach, Deutschland

Verkäufer/-in mit 5 Sternen

AbeBooks-Verkäufer/-in seit 11. Januar 2012

Versandkosten von Deutschland nach USA

Artikel5 bis 15 Werktage5 bis 15 Werktage
Erster ArtikelEUR 23,00EUR 23,00
Die Versandzeiten werden von den Verkäuferinnen und Verkäufern festgelegt. Sie variieren je nach Versanddienstleister und Standort. Sendungen, die den Zoll passieren, können Verzögerungen unterliegen. Eventuell anfallende Abgaben oder Gebühren sind von der Käuferin bzw. dem Käufer zu tragen. Die Verkäuferin bzw. der Verkäufer kann Sie bezüglich zusätzlicher Versandkosten kontaktieren, um einen möglichen Anstieg der Versandkosten für Ihre Artikel auszugleichen.

Zahlungsarten

  • Visa
  • Mastercard
  • American Express
  • Carte Bleue
  • Apple Pay
  • Google Pay
  • Banküberweisung
  • PayPal
  • Vorauskasse

Unternehmensdaten der Verkäuferin bzw. des Verkäufers

BuchWeltWeit Ludwig Meier e.K.

Deutschland