ISBN 10: 9401061211 / ISBN 13: 9789401061216
Gebraucht / Anzahl: 0
Bei weiteren Verkäufern erhältlich
Alle  Exemplare dieses Buches anzeigen

Über dieses Buch

Leider ist dieses Exemplar nicht mehr verfügbar. Wir haben Ihnen weitere Exemplare dieses Titels unten aufgelistet.

Beschreibung:

This Book is in Good Condition. Clean Copy With Light Amount of Wear. 100% Guaranteed. Summary: Proceedings of the NSF/AFOSR/ASME Workshop on Tribology Issues and Opportunities in MEMS held in Columbus, Ohio, USA, 9-11 November 1997. Buchnummer des Verkäufers

Über diesen Titel:

Bewertung (bereitgestellt von GoodReads):
0 durchschnittlich
(0 Bewertungen)

Inhaltsangabe: Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the construction ofthese microdevices. These issues are based on surface phenomenaand cannotbe scaled down linearly and these become increasingly important with the small size of the devices. Continuum theory breaks down in the analyses, e. g. in fluid flow of micro-scale devices. Mechanical properties ofpolysilicon and other films are not well characterized. Roughness optimization can help in tribological improvements. Monolayers of lubricants and other materials need to be developed for ultra-low friction and near zero wear. Hard coatings and ion implantation techniques hold promise.

Inhaltsangabe: This volume contains the Proceedings of the NSF/AFOSR/ASME Workshop on Tribology Issues and Opportunities in MEMS, held in Columbus, Ohio, USA, 9-11 November, 1997. Micro Electro Mechanical Systems (MEMS) is a rapidly growing industry. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surface chemistry and materials science in the operation and manufacturing of many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to state-of-the-art tribology and vice versa, and this was the specific aim of the workshop.
Better tribological understanding of MEMS will advance the state of the art in micromachining and in the IC industry in general. For example, better understanding will contribute to better performance prediction for micromachined pressure sensors, accelerometers and gyros as well as a better understanding of stiction behaviour of micro-mirrors and micromotors and of the influence of roughness on micro-fluids.
This volume will be of interest to researchers, manufacturers and potential users of MEMS and experts in tribology (including mechanics, mechanical properties and surface modification).

„Über diesen Titel“ kann sich auf eine andere Ausgabe dieses Titels beziehen.

Bibliografische Details




Zustand: Used

Beste Suchergebnisse bei AbeBooks

1.

Verlag: Springer, Netherlands (2012)
ISBN 10: 9401061211 ISBN 13: 9789401061216
Neu Paperback Anzahl: 1
Anbieter
The Book Depository
(London, Vereinigtes Königreich)
Bewertung
[?]

Buchbeschreibung Springer, Netherlands, 2012. Paperback. Buchzustand: New. 240 x 160 mm. Language: English . Brand New Book. Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the construction ofthese microdevices. These issues are based on surface phenomenaand cannotbe scaled down linearly and these become increasingly important with the small size of the devices. Continuum theory breaks down in the analyses, e. g. in fluid flow of micro-scale devices. Mechanical properties ofpolysilicon and other films are not well characterized. Roughness optimization can help in tribological improvements. Monolayers of lubricants and other materials need to be developed for ultra-low friction and near zero wear. Hard coatings and ion implantation techniques hold promise. Softcover reprint of the original 1st ed. 1998. Buchnummer des Verkäufers KNV9789401061216

Weitere Informationen zu diesem Verkäufer | Frage an den Anbieter

Neu kaufen
EUR 321,42
Währung umrechnen

In den Warenkorb

Versand: Gratis
Von Vereinigtes Königreich nach USA
Versandziele, Kosten & Dauer

2.

Bhushan, Bharat (EDT)
Verlag: Springer 2012-11-05, Dordrecht (2012)
ISBN 10: 9401061211 ISBN 13: 9789401061216
Neu paperback Anzahl: > 20
Anbieter
Blackwell's
(Oxford, OX, Vereinigtes Königreich)
Bewertung
[?]

Buchbeschreibung Springer 2012-11-05, Dordrecht, 2012. paperback. Buchzustand: New. Buchnummer des Verkäufers 9789401061216

Weitere Informationen zu diesem Verkäufer | Frage an den Anbieter

Neu kaufen
EUR 321,43
Währung umrechnen

In den Warenkorb

Versand: EUR 5,21
Von Vereinigtes Königreich nach USA
Versandziele, Kosten & Dauer

3.

Bharat Bhushan
Verlag: Springer (2012)
ISBN 10: 9401061211 ISBN 13: 9789401061216
Neu Anzahl: > 20
Print-on-Demand
Anbieter
Books2Anywhere
(Fairford, GLOS, Vereinigtes Königreich)
Bewertung
[?]

Buchbeschreibung Springer, 2012. PAP. Buchzustand: New. New Book. Delivered from our UK warehouse in 3 to 5 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Buchnummer des Verkäufers LQ-9789401061216

Weitere Informationen zu diesem Verkäufer | Frage an den Anbieter

Neu kaufen
EUR 322,42
Währung umrechnen

In den Warenkorb

Versand: EUR 10,42
Von Vereinigtes Königreich nach USA
Versandziele, Kosten & Dauer

4.

Verlag: Springer, Netherlands (2012)
ISBN 10: 9401061211 ISBN 13: 9789401061216
Neu Paperback Anzahl: 1
Anbieter
The Book Depository US
(London, Vereinigtes Königreich)
Bewertung
[?]

Buchbeschreibung Springer, Netherlands, 2012. Paperback. Buchzustand: New. 240 x 160 mm. Language: English . Brand New Book. Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the construction ofthese microdevices. These issues are based on surface phenomenaand cannotbe scaled down linearly and these become increasingly important with the small size of the devices. Continuum theory breaks down in the analyses, e. g. in fluid flow of micro-scale devices. Mechanical properties ofpolysilicon and other films are not well characterized. Roughness optimization can help in tribological improvements. Monolayers of lubricants and other materials need to be developed for ultra-low friction and near zero wear. Hard coatings and ion implantation techniques hold promise. Softcover reprint of the original 1st ed. 1998. Buchnummer des Verkäufers KNV9789401061216

Weitere Informationen zu diesem Verkäufer | Frage an den Anbieter

Neu kaufen
EUR 333,23
Währung umrechnen

In den Warenkorb

Versand: Gratis
Von Vereinigtes Königreich nach USA
Versandziele, Kosten & Dauer

5.

BHARAT BHUSHAN
Verlag: Springer (2012)
ISBN 10: 9401061211 ISBN 13: 9789401061216
Neu Paperback Anzahl: 1
Anbieter
Herb Tandree Philosophy Books
(Stroud, GLOS, Vereinigtes Königreich)
Bewertung
[?]

Buchbeschreibung Springer, 2012. Paperback. Buchzustand: NEW. 9789401061216 This listing is a new book, a title currently in-print which we order directly and immediately from the publisher. Buchnummer des Verkäufers HTANDREE0393483

Weitere Informationen zu diesem Verkäufer | Frage an den Anbieter

Neu kaufen
EUR 367,17
Währung umrechnen

In den Warenkorb

Versand: EUR 9,31
Von Vereinigtes Königreich nach USA
Versandziele, Kosten & Dauer

6.

Bharat Bhushan
Verlag: Springer Nov 2012 (2012)
ISBN 10: 9401061211 ISBN 13: 9789401061216
Neu Taschenbuch Anzahl: 2
Anbieter
Rheinberg-Buch
(Bergisch Gladbach, Deutschland)
Bewertung
[?]

Buchbeschreibung Springer Nov 2012, 2012. Taschenbuch. Buchzustand: Neu. 240x160x35 mm. Neuware - Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the construction ofthese microdevices. These issues are based on surface phenomenaand cannotbe scaled down linearly and these become increasingly important with the small size of the devices. Continuum theory breaks down in the analyses, e. g. in fluid flow of micro-scale devices. Mechanical properties ofpolysilicon and other films are not well characterized. Roughness optimization can help in tribological improvements. Monolayers of lubricants and other materials need to be developed for ultra-low friction and near zero wear. Hard coatings and ion implantation techniques hold promise. 672 pp. Englisch. Buchnummer des Verkäufers 9789401061216

Weitere Informationen zu diesem Verkäufer | Frage an den Anbieter

Neu kaufen
EUR 378,78
Währung umrechnen

In den Warenkorb

Versand: EUR 17,13
Von Deutschland nach USA
Versandziele, Kosten & Dauer

7.

Bharat Bhushan
Verlag: Springer Nov 2012 (2012)
ISBN 10: 9401061211 ISBN 13: 9789401061216
Neu Taschenbuch Anzahl: 1
Print-on-Demand
Anbieter
AHA-BUCH GmbH
(Einbeck, Deutschland)
Bewertung
[?]

Buchbeschreibung Springer Nov 2012, 2012. Taschenbuch. Buchzustand: Neu. 24x16x cm. This item is printed on demand - Print on Demand Neuware - Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the construction ofthese microdevices. These issues are based on surface phenomenaand cannotbe scaled down linearly and these become increasingly important with the small size of the devices. Continuum theory breaks down in the analyses, e. g. in fluid flow of micro-scale devices. Mechanical properties ofpolysilicon and other films are not well characterized. Roughness optimization can help in tribological improvements. Monolayers of lubricants and other materials need to be developed for ultra-low friction and near zero wear. Hard coatings and ion implantation techniques hold promise. 655 pp. Englisch. Buchnummer des Verkäufers 9789401061216

Weitere Informationen zu diesem Verkäufer | Frage an den Anbieter

Neu kaufen
EUR 378,78
Währung umrechnen

In den Warenkorb

Versand: EUR 29,50
Von Deutschland nach USA
Versandziele, Kosten & Dauer

8.

Bharat Bhushan
Verlag: Springer Nov 2012 (2012)
ISBN 10: 9401061211 ISBN 13: 9789401061216
Neu Taschenbuch Anzahl: 2
Anbieter
Agrios-Buch
(Bergisch Gladbach, Deutschland)
Bewertung
[?]

Buchbeschreibung Springer Nov 2012, 2012. Taschenbuch. Buchzustand: Neu. 240x160x35 mm. Neuware - Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the construction ofthese microdevices. These issues are based on surface phenomenaand cannotbe scaled down linearly and these become increasingly important with the small size of the devices. Continuum theory breaks down in the analyses, e. g. in fluid flow of micro-scale devices. Mechanical properties ofpolysilicon and other films are not well characterized. Roughness optimization can help in tribological improvements. Monolayers of lubricants and other materials need to be developed for ultra-low friction and near zero wear. Hard coatings and ion implantation techniques hold promise. 672 pp. Englisch. Buchnummer des Verkäufers 9789401061216

Weitere Informationen zu diesem Verkäufer | Frage an den Anbieter

Neu kaufen
EUR 378,78
Währung umrechnen

In den Warenkorb

Versand: EUR 17,11
Von Deutschland nach USA
Versandziele, Kosten & Dauer

9.

Bharat Bhushan
Verlag: Springer (2012)
ISBN 10: 9401061211 ISBN 13: 9789401061216
Neu Anzahl: > 20
Print-on-Demand
Anbieter
PBShop
(Wood Dale, IL, USA)
Bewertung
[?]

Buchbeschreibung Springer, 2012. PAP. Buchzustand: New. New Book. Shipped from US within 10 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Buchnummer des Verkäufers IQ-9789401061216

Weitere Informationen zu diesem Verkäufer | Frage an den Anbieter

Neu kaufen
EUR 392,24
Währung umrechnen

In den Warenkorb

Versand: EUR 3,73
Innerhalb USA
Versandziele, Kosten & Dauer

10.

Bhushan, Bharat
ISBN 10: 9401061211 ISBN 13: 9789401061216
Neu Anzahl: 1
Anbieter
English-Book-Service Mannheim
(Mannheim, Deutschland)
Bewertung
[?]

Buchbeschreibung Buchzustand: New. Publisher/Verlag: Springer Netherlands | Proceedings of the NSF/AFOSR/ASME Workshop on Tribology Issues and Opportunities in MEMS held in Columbus, Ohio, U.S.A., 9 11 November 1997 | Proceedings of the NSF/AFOSR/ASME Workshop on Tribology Issues and Opportunities in MEMS held in Columbus, Ohio, USA, 9-11 November 1997 | Micro Electro Mechanical Systems (MEMS) is already about a billion dollars a year industry and is growing rapidly. So far major emphasis has been placed on the fabrication processes for various devices. There are serious issues related to tribology, mechanics, surfacechemistry and materials science in the operationand manufacturingof many MEMS devices and these issues are preventing an even faster commercialization. Very little is understood about tribology and mechanical properties on micro- to nanoscales of the materials used in the construction of MEMS devices. The MEMS community needs to be exposed to the state-of-the-artoftribology and vice versa. Fundamental understanding of friction/stiction, wear and the role of surface contamination and environmental debris in micro devices is required. There are significantadhesion, friction and wear issues in manufacturing and actual use, facing the MEMS industry. Very little is understood about the tribology of bulk silicon and polysilicon films used in the construction ofthese microdevices. These issues are based on surface phenomenaand cannotbe scaled down linearly and these become increasingly important with the small size of the devices. Continuum theory breaks down in the analyses, e. g. in fluid flow of micro-scale devices. Mechanical properties ofpolysilicon and other films are not well characterized. Roughness optimization can help in tribological improvements. Monolayers of lubricants and other materials need to be developed for ultra-low friction and near zero wear. Hard coatings and ion implantation techniques hold promise. | Preface. 1. MEMS Fabrication Techniques. 2. MEMS Applications and Tribology Issues. 3. State-of-the-Art of Tribology: Macroscale Processes. 4. State-of-the-Art of Tribology: Micro- to Nanoscale Processes. 5. Tribology of MEMS Components and Materials. 6. Mechanical Property Measurements. 7. Modification and Characterization of Surfaces. 8. Breakout Sessions Report. 9. Panel Discussion Report. List of Participants. Subject Index. Editor's Vita. | Format: Paperback | Language/Sprache: english | 242x161x35 mm | 655 pp. Buchnummer des Verkäufers K9789401061216

Weitere Informationen zu diesem Verkäufer | Frage an den Anbieter

Neu kaufen
EUR 400,12
Währung umrechnen

In den Warenkorb

Versand: EUR 5,00
Von Deutschland nach USA
Versandziele, Kosten & Dauer

Es gibt 3 weitere Exemplare dieses Buches

Alle Suchergebnisse ansehen