Gesamtpreis (1 Artikel Artikel):
Versandziel:
SANDHU, HARPRIT (86 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (86)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
Einband
- alle Einbände
- Hardcover (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Softcover (86)
Weitere Eigenschaften
- Erstausgabe (3)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Angebotsfoto (35)
- Keine Print-on-Demand Angebote (84)
Sprache (2)
Gratisversand
Land des Verkäufers
Verkäuferbewertung
-
An Introduction to Robotics
Verlag: Specialist Interest Model Books ltd, 1997
ISBN 10: 1854861530 ISBN 13: 9781854861535
Sprache: Englisch
Anbieter: WorldofBooks, Goring-By-Sea, WS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 1,40
EUR 6,34 für den Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Very Good. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
-
paperback. Zustand: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!
-
An Introduction to Robotics
Verlag: Special Interest Model Books, 1997
ISBN 10: 1854861530 ISBN 13: 9781854861535
Sprache: Englisch
Anbieter: WeBuyBooks, Rossendale, LANCS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 1,51
EUR 7,36 für den Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Very Good. Most items will be dispatched the same or the next working day. A copy that has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
-
Making PIC Microcontroller Instruments and Controllers
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Good. No Jacket. Pages can have notes/highlighting. Spine may show signs of wear. ~ ThriftBooks: Read More, Spend Less.
-
Programming the Propeller with Spin: A Beginner's Guide to Parallel Processing
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Spindles for Small Shop Metalw
Anbieter: World of Books (was SecondSale), Montgomery, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Very Good. Item in very good condition! Textbooks may not include supplemental items i.e. CDs, access codes etc.
-
Spindles for Small Shop Metalworkers
Anbieter: GreatBookPrices, Columbia, MD, USA
Verkäuferbewertung 5 von 5 Sternen
EUR 9,86
EUR 2,28 für den Versand innerhalb von/der USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: As New. Unread book in perfect condition.
-
Spindles for Small Shop Metalworkers
Anbieter: GreatBookPrices, Columbia, MD, USA
Verkäuferbewertung 5 von 5 Sternen
EUR 10,59
EUR 2,28 für den Versand innerhalb von/der USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
-
Spindles for Small Shop Metalworkers (Paperback)
Verlag: Fox Chapel Publishing, East Petersberg, 2022
ISBN 10: 1497101956 ISBN 13: 9781497101951
Sprache: Englisch
Anbieter: Grand Eagle Retail, Bensenville, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: new. Paperback. The possibilities of what you can achieve in your workshop are greatly enhanced if you have spindles to use with your lathe! A complete and crucial guide for amateur engineers, this book describes the design, construction, and use for a variety of useful spindles that range in shape and size. Featuring over 150 scale plans, line drawings, and a collection of helpful data tables, this metalworking guide clearly outlines several techniques for milling, grinding, and drilling spindles that are easy to make and have as few parts as possible. Author Harprit Singh Sandhu is an American engineer and the founder of Rhino Robots Inc. The chief designer of the 'Rhino' series of robots, he is also a machinist, woodworker, and clockmaker - the latter of which inspired him to design and build the spindles described in this book. Learn how to build your own spindle varieties and enhance your lathe and workshop. Includes over 150 scale plans, line drawings, and data tables. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
-
Running Small Motors with PIC Microcontrollers
Anbieter: ThriftBooks-Dallas, Dallas, TX, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Running Small Motors with PIC Microcontrollers
Anbieter: ThriftBooks-Atlanta, AUSTELL, GA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.
-
Spindles for Small Shop Metalworkers
Verlag: Fox Chapel Publishing, US, 2022
ISBN 10: 1497101956 ISBN 13: 9781497101951
Sprache: Englisch
EUR 13,20
Kostenlos für den Versand innerhalb von/der USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbPaperback. Zustand: New.
-
Programming the Propeller with Spin: A Beginner's Guide to Parallel Processing (Tab Electronics)
Verlag: McGraw-Hill Education TAB, 2010
ISBN 10: 0071716661 ISBN 13: 9780071716666
Sprache: Englisch
Anbieter: Books From California, Simi Valley, CA, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: Very Good.
-
Spindles (Workshop Practice Series)
Verlag: Special Interest Model Books, 1998
ISBN 10: 1854861492 ISBN 13: 9781854861498
Sprache: Englisch
Anbieter: World of Books (was SecondSale), Montgomery, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. Item in good condition. Textbooks may not include supplemental items i.e. CDs, access codes etc.
-
Programming the Propeller with Spin: a Beginner's Guide to Parallel Processing
Anbieter: TextbookRush, Grandview Heights, OH, USA
Verkäuferbewertung 4 von 5 Sternen
Zustand: Good.
-
Spindles (Paperback)
Verlag: Fox Chapel Publishers International, Hemel Hempstead, 1998
ISBN 10: 1854861492 ISBN 13: 9781854861498
Sprache: Englisch
Anbieter: Grand Eagle Retail, Bensenville, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: new. Paperback. With the model and amateur engineer in mind, this is a guide to making light milling or grinding spindles with a small lathe. Spindles come in many shapes and sizes, depending on their use and included here are descriptions of the design, construction and use of a variety of types (from 19.05 - 57.15mm/0.75 - 2.25 inch) for grinding, milling and drilling. The emphasis is on spindles which are easy to make and have as few parts as possible - all but one use sealed ball bearings. The author is a designer, machinist and woodworker whose interest in clock making led him to design and build the spindles in the book. Also included is a light gear cutting frame for clock makers. Describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear cutting frame for clockmakers. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
-
Spindles
Verlag: Fox Chapel Publishers International, GB, 1998
ISBN 10: 1854861492 ISBN 13: 9781854861498
Sprache: Englisch
Anbieter: Rarewaves.com USA, London, LONDO, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 16,50
Kostenlos für den Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbPaperback. Zustand: New. If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers. The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards.
-
Zustand: Fair. [ No Hassle 30 Day Returns ][ Ships Daily ] [ Underlining/Highlighting: NONE ] [ Writing: NONE ] [ Torn pages: YES ] [ Edition: Reprint ] Publisher: Human Sciences Pr Pub Date: 1/1/2001 Binding: Paperback Pages: 236 Reprint edition.
-
Spindles: 27 (Workshop Practice Series)
Verlag: Fox Chapel Publishers International, United Kingdom, 1998
ISBN 10: 1854861492 ISBN 13: 9781854861498
Sprache: Englisch
Anbieter: WorldofBooks, Goring-By-Sea, WS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 10,61
EUR 6,34 für den Versand von Vereinigtes Königreich nach USAAnzahl: 3 verfügbar
In den WarenkorbPaperback. Zustand: Very Good. If you do not own a milling machine (and even if you do) what you can achieve in your workshop is greatly enhanced if you own a spindle or two for use with your lathe. Spindles come in many shapes and sizes, ranging from 19mm (0.75 in) to 57 mm (2.25 in) in diameter, depending on the uses envisaged for them. This book describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear-cutting frame for clockmakers. The emphasis is on spindles that are easy to make and have as few parts as possible; all but one for example use sealed ball bearings (the exception uses tapered collar bearings and thus needs to have seals installed to protect the bearings.) The basic spindle described uses the same spindle nose as the Myford Super 7 lathe; this allows all chucks, plates, collets and closers designed for the lathe to be used with this spindle. It can also be modified for other lathe nose standards. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged.
-
Spindles
Verlag: Fox Chapel Publishers International, 1998
ISBN 10: 1854861492 ISBN 13: 9781854861498
Sprache: Englisch
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 13,33
EUR 3,73 für den Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Spindles for Small Shop Metalworkers
Verlag: Fox Chapel Publishing, US, 2022
ISBN 10: 1497101956 ISBN 13: 9781497101951
Sprache: Englisch
Anbieter: Rarewaves.com USA, London, LONDO, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 19,50
Kostenlos für den Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbPaperback. Zustand: New.
-
An Introduction to Robotics
Verlag: Nexus Special Interests, London, 1997
ISBN 10: 1854861530 ISBN 13: 9781854861535
Sprache: Englisch
Anbieter: BIBLIOPE by Calvello Books, Oakland, CA, USA
Verkäuferbewertung 4 von 5 Sternen
Erstausgabe
Paperback. Zustand: very good. First edition (stated). Grey octavo (grey spine); 198 p, b&w illus; 24 cm. Technology; Science; History. Extremely gentle wear to spine head & foot, few creases to front cover or spine, barely rubbed corners, else very good+.
-
Spindles
Verlag: Specialist Interest Model Books Limited, 1998
ISBN 10: 1854861492 ISBN 13: 9781854861498
Sprache: Englisch
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 13,78
EUR 7,36 für den Versand von Vereinigtes Königreich nach USAAnzahl: 3 verfügbar
In den WarenkorbZustand: New. pp. 160.
-
Spindles
Verlag: Specialist Interest Model Books Limited, 1998
ISBN 10: 1854861492 ISBN 13: 9781854861498
Sprache: Englisch
Zustand: New. pp. 160.
-
An Introduction to Robotics (Paperback)
Verlag: Fox Chapel Publishers International, Hemel Hempstead, 1998
ISBN 10: 1854861530 ISBN 13: 9781854861535
Sprache: Englisch
Anbieter: Grand Eagle Retail, Bensenville, IL, USA
Verkäuferbewertung 5 von 5 Sternen
Paperback. Zustand: new. Paperback. This is an introduction for the amateur to the ideas and concepts, both theoretical and practical, of robotics. It is divided into two sections. The first covers how and why robots work and how they are controlled. The second discusses how to make a simple two-legged humanoid robot that can be programmed to walk. There are no complicated formulae or equations to grapple with or complicated circuit diagrams to decipher, and you do not have to be a machinist or a programmer. The robot can be built quickly on a workbench or even a kitchen table, with a minimum number of handtools, and all the parts are easily available. An introduction for the amateur to the ideas and concepts of robotics. The first part explains how and why robots work and are controlled, while the second part shows you how to make a simple two-legged humanoid robot that can be programmed from a home computer to walk. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
-
An Introduction to Robotics
Verlag: Specialist Interest Model Books Limited, 1997
ISBN 10: 1854861530 ISBN 13: 9781854861535
Sprache: Englisch
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 17,10
EUR 7,36 für den Versand von Vereinigtes Königreich nach USAAnzahl: 3 verfügbar
In den WarenkorbZustand: New. pp. 204.
-
An Introduction to Robotics
Verlag: Fox Chapel Publishers International, GB, 1998
ISBN 10: 1854861530 ISBN 13: 9781854861535
Sprache: Englisch
Anbieter: Rarewaves.com USA, London, LONDO, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 24,96
Kostenlos für den Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbPaperback. Zustand: New. This exciting book breaks new ground by introducing the amateur to the ideas and concepts, both theoretical and practical, of robotics - a nascent discipline which will radically change the way we work. Although today we use the term 'robots', in the future other terms will have to be coined in order to describe their utility and capabilities. The book is divided into two sections: 1: How and why robots work and how they are controlled. 2: How to make a simple two-legged humanoid robot that can be programmed to walk. There are no complicated formulae or equations to grapple with or complicated circuit diagrams to decipher, and you don't have to be either a machinist or a programmer - everything is presented in clear, concise, everyday English. The robot can be built quickly on a workbench, or even a kitchen table, with a minimum number of handtools, and all the parts are easily available in the UK and the USA.This is a fascinating and unique book which explains the basics of a subject which is the next generation of model engineering, combining construction skills with computer programming and teaches you to build and run a working robot which can be controlled from any personal computer.
-
An Introduction to Robotics
Verlag: Specialist Interest Model Books ltd, 1997
ISBN 10: 1854861530 ISBN 13: 9781854861535
Sprache: Englisch
Anbieter: Brook Bookstore On Demand, Napoli, NA, Italien
Verkäuferbewertung 4 von 5 Sternen
EUR 19,62
EUR 5,50 für den Versand von Italien nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: new.
-
An Introduction to Robotics
Verlag: Fox Chapel Publishers International, 1998
ISBN 10: 1854861530 ISBN 13: 9781854861535
Sprache: Englisch
Anbieter: PBShop.store UK, Fairford, GLOS, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 20,38
EUR 5,69 für den Versand von Vereinigtes Königreich nach USAAnzahl: 15 verfügbar
In den WarenkorbPAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.
-
Spindles for Small Shop Metalworkers
Anbieter: Kennys Bookshop and Art Galleries Ltd., Galway, GY, Irland
Verkäuferbewertung 5 von 5 Sternen
EUR 15,94
EUR 10,50 für den Versand von Irland nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. 2022. First North American. paperback. . . . . .
