Aurich jan (106 Ergebnisse)
- Hardcover
Anbieter: Brook Bookstore On Demand, Napoli, NA, ItalienBrook Bookstore On Demand
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 38,22
EUR 6,80 VersandVersand von Italien nach USAAnzahl: Mehr als 20 verfügbar
Zustand: new.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (EDT); Garth, Christoph (EDT); Linke, Barbara S. (EDT)
- Hardcover
Anbieter: GreatBookPrices, Columbia, MD, USAGreatBookPrices
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 45,19
EUR 2,29 VersandVersand innerhalb von USAAnzahl: Mehr als 20 verfügbar
Zustand: New.
- Hardcover
- Erstausgabe
Anbieter: Grand Eagle Retail, Bensenville, IL, USAGrand Eagle Retail
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 47,60
Versand gratisVersand innerhalb von USAAnzahl: 1 verfügbar
Hardcover. Zustand: new. Hardcover. This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University of… California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
- Hardcover
Anbieter: Basi6 International, Irving, TX, USABasi6 International
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 53,06
Versand gratisVersand innerhalb von USAAnzahl: 10 verfügbar
Zustand: Brand New. New. Delivery takes 25-30 days. Excellent Customer Service.
- Softcover
Anbieter: Basi6 International, Irving, TX, USABasi6 International
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 53,06
Versand gratisVersand innerhalb von USAAnzahl: 10 verfügbar
Zustand: Brand New. New. Delivery takes 25-30 days. Excellent Customer Service.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (EDT); Garth, Christoph (EDT); Linke, Barbara S. (EDT)
- Hardcover
Anbieter: GreatBookPrices, Columbia, MD, USAGreatBookPrices
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Wie neu
EUR 52,32
EUR 2,29 VersandVersand innerhalb von USAAnzahl: Mehr als 20 verfügbar
Zustand: As New. Unread book in perfect condition.
- Hardcover
Anbieter: California Books, Miami, FL, USACalifornia Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 58,89
Versand gratisVersand innerhalb von USAAnzahl: Mehr als 20 verfügbar
Zustand: New.
- Softcover
Anbieter: California Books, Miami, FL, USACalifornia Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 58,89
Versand gratisVersand innerhalb von USAAnzahl: Mehr als 20 verfügbar
Zustand: New.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 48,89
EUR 14,02 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 48,89
EUR 14,02 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Hardcover
Anbieter: Brook Bookstore, Milano, MI, ItalienBrook Bookstore
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 33,48
EUR 27,99 VersandVersand von Italien nach USAAnzahl: Mehr als 20 verfügbar
Zustand: new.
- Softcover
Anbieter: Books Puddle, New York, NY, USABooks Puddle
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 60,17
EUR 3,46 VersandVersand innerhalb von USAAnzahl: 4 verfügbar
Zustand: New.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (EDT); Garth, Christoph (EDT); Linke, Barbara S. (EDT)
- Hardcover
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 48,18
EUR 17,55 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New.
- Hardcover
Anbieter: Books Puddle, New York, NY, USABooks Puddle
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 62,83
EUR 3,46 VersandVersand innerhalb von USAAnzahl: 4 verfügbar
Zustand: New.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 55,06
EUR 14,02 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (EDT); Garth, Christoph (EDT); Linke, Barbara S. (EDT)
- Hardcover
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes KönigreichGreatBookPricesUK
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Wie neu
EUR 53,21
EUR 17,55 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: As New. Unread book in perfect condition.
- Hardcover
Anbieter: Studibuch, Stuttgart, DeutschlandStudibuch
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Gut
EUR 7,95
EUR 62,30 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
hardcover. Zustand: Gut. 308 Seiten; 9783031357787.3 Gewicht in Gramm: 1.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (Editor)/ Garth, Christoph (Editor)/ Linke, Barbara S. (Editor)
- Softcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 72,57
EUR 11,70 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Paperback. Zustand: Brand New. 308 pages. 9.25x6.10x0.65 inches. In Stock.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (Edited by)/ Garth, Christoph (Edited by)/ Linke, Barbara S. (Edited by)
- Hardcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 74,58
EUR 14,63 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Hardcover. Zustand: Brand New. 308 pages. 9.25x6.10x0.91 inches. In Stock.
Sprache: Englisch
Verlag: Springer International Publishing, Springer International Publishing, 2023
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 42,79
EUR 62,38 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, theUniversit…y of California Berkeley,and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.
- Hardcover
- Erstausgabe
Anbieter: AussieBookSeller, Truganina, VIC, AustralienAussieBookSeller
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 76,02
EUR 32,05 VersandVersand von Australien nach USAAnzahl: 1 verfügbar
Hardcover. Zustand: new. Hardcover. This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University of… California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
Sprache: Englisch
Verlag: Springer International Publishing, Springer International Publishing, 2023
- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 42,79
EUR 63,18 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, theUniversity of Ca…lifornia Berkeley,and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 41,45
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes | Jan C. Aurich (u. a.) | Taschenbuch | xiii | Englisch | 2023 | Springer | EAN 9783031357817 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[do…t]hartmann[at]springer[dot]com | Anbieter: preigu.
- Softcover
Anbieter: Buchpark, Trebbin, DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht
EUR 22,44
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 312 | Sprache: Englisch | Produktart: Bücher | This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiser…slautern, the University of California Berkeley, and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.
Sprache: Englisch
Verlag: Springer, 2024
Serie: Buch 72 von 74 - Springer Series in Advanced Manufacturing
- Softcover
Anbieter: Basi6 International, Irving, TX, USABasi6 International
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 174,46
Versand gratisVersand innerhalb von USAAnzahl: 10 verfügbar
Zustand: Brand New. New. Delivery takes 25-30 days. Excellent Customer Service.
Sprache: Englisch
Verlag: Springer, 2023
Serie: Buch 72 von 74 - Springer Series in Advanced Manufacturing
- Hardcover
Anbieter: Basi6 International, Irving, TX, USABasi6 International
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 174,46
Versand gratisVersand innerhalb von USAAnzahl: 10 verfügbar
Zustand: Brand New. New. Delivery takes 25-30 days. Excellent Customer Service.
- Hardcover
Anbieter: Basi6 International, Irving, TX, USABasi6 International
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 189,64
Versand gratisVersand innerhalb von USAAnzahl: 10 verfügbar
Zustand: Brand New. New. Delivery takes 25-30 days. Excellent Customer Service.
- Softcover
Anbieter: Basi6 International, Irving, TX, USABasi6 International
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 189,64
Versand gratisVersand innerhalb von USAAnzahl: 10 verfügbar
Zustand: Brand New. New. Delivery takes 25-30 days. Excellent Customer Service.
Sprache: Englisch
Verlag: Springer International Publishing AG, Cham, 2023
Serie: Buch 72 von 74 - Springer Series in Advanced Manufacturing
- Hardcover
Anbieter: Grand Eagle Retail, Bensenville, IL, USAGrand Eagle Retail
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 245,21
Versand gratisVersand innerhalb von USAAnzahl: 1 verfügbar
Hardcover. Zustand: new. Hardcover. This book sheds new light on component surfaces and the scientific fundamentals of their creation, characterization, and application. The book also provides a new interdisciplinary perspective on the topic, studying component surfaces with a multiscale approach and linking fundamental and appl…ied research. The book builds on the success of the coordinated research project funded by Deutsche Forschungsgemeinschaft (DFG) from 2011 2023: the CollaborativeResearch Center CRC 926 Microscale Morphology of Component Surfaces (MI-COS), in which, over the years, 100+ researchers have co-operated at the University of Kaiserslautern, Germany, and affiliated institutes, yielding 500+ scientific papers in journals from different fields of science and engineering.Divided into 2 main parts, the book starts with an introduction to the concept of Manufacturing-Morphology-Property (MMP) Relationships and dives into the fundamentals and technologies, including topics such as the geometrical, microstructural, and chemical characterization, indentation, and scratching on the nanoscale, micro milling and micro grinding, cryogenic machining, cold spraying, and additive manufacturing. In the first part, readers discover more about the interactions between particles and surfaces, the interrelationship of manufacturing, surface morphology and properties of titanium, the influence of manufacturing and load conditions on the phase transformation and fatigue of austenitic stainless steels, and the influence of surface morphology on fatigue and tribological behavior of Transformation-Induced-Plasticity (TRIP)/Twinning-Induced Plasticity (TWIP) Steels. The second part of this book is devoted to the applications of component surfaces, covering topics like the manufacturing of areal material measures, MMP relationships for rotating shaft sealing systems, the influence of the surface morphology on rolling bearing life under mixed lubrication, MMP relationships for chain joints, and MMP for biofilms.Scientists and engineers who deal with the influence of surfaces on macroscopic properties of components and who are interested in designing and manufacturing these surfaces to obtain desired component properties will understand the appeal of this work. Given its interdisciplinary breadth, the book also appeals to scholars and professionals in the fields of mechanical engineering, process engineering, and physics. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Sprache: Englisch
Verlag: Springer, 2024
Serie: Buch 72 von 74 - Springer Series in Advanced Manufacturing
- Softcover
Anbieter: Buchpark, Trebbin, DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht
EUR 140,45
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 456 | Sprache: Englisch | Produktart: Bücher | This book sheds new light on component surfaces and the scientific fundamentals of their creation, characterization, and application. The book also provides a new interdisciplinary perspective on the topic, studying component su…rfaces with a multiscale approach and linking fundamental and applied research. The book builds on the success of the coordinated research project funded by Deutsche Forschungsgemeinschaft (DFG) from 2011 ¿ 2023: the CollaborativeResearch Center CRC 926 ¿Microscale Morphology of Component Surfaces (MI-COS)¿, in which, over the years, 100+ researchers have co-operated at the University of Kaiserslautern, Germany, and affiliated institutes, yielding 500+ scientific papers in journals from different fields of science and engineering. Divided into 2 main parts, the book starts with an introduction to the concept of Manufacturing-Morphology-Property (MMP) Relationships and dives into the fundamentals and technologies, including topics such as the geometrical, microstructural, and chemical characterization, indentation, and scratching on the nanoscale, micro milling and micro grinding, cryogenic machining, cold spraying, and additive manufacturing. In the first part, readers discover more about the interactions between particles and surfaces, the interrelationship of manufacturing, surface morphology and properties of titanium, the influence of manufacturing and load conditions on the phase transformation and fatigue of austenitic stainless steels, and the influence of surface morphology on fatigue and tribological behavior of Transformation-Induced-Plasticity (TRIP)/Twinning-Induced Plasticity (TWIP) Steels. The second part of this book is devoted to the applications of component surfaces, covering topics like the manufacturing of areal material measures, MMP relationships for rotating shaft sealing systems, the influence of the surface morphology on rolling bearing life under mixed lubrication, MMP relationships for chain joints, and MMP for biofilms. Scientists and engineers who deal with the influence of surfaces on macroscopic properties of components and who are interested in designing and manufacturing these surfaces to obtain desired component properties will understand the appeal of this work. Given its interdisciplinary breadth, the book also appeals to scholars and professionals in the fields of mechanical engineering, process engineering, and physics.
