Paperback. Zustand: Very Good. 1. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.
Zustand: very_good. Used with minimal wear, no writing or markings, corners maybe bent, few crease lines.
Zustand: As New. Unread book in perfect condition.
Zustand: New.
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
EUR 57,58
Anzahl: 3 verfügbar
In den WarenkorbZustand: New. pp. 192.
Zustand: New. pp. 192.
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes Königreich
EUR 54,34
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes Königreich
EUR 54,58
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: As New. Unread book in perfect condition.
EUR 23,45
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 62,24
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Verlag: Penrith Regional Art Gallery, Emu Plains, NSW, 1996
Anbieter: BOOKHOME SYDNEY, Annandale Sydney, NSW, Australien
Paperback oblong quarto, stapled pamphlet, very good condition, colour & black & white text-photos, top corner tip front cover & some pages little creased, light toning edges, spine rubbed, small section front cover little faded, minor edgewear. 24 pp. This is the catalog of the Two Worlds - One Sky art exhibition. It ran from 15th December to 4 February 1996 at the Lewers Bequest and Penrith Regional Art Gallery, and The National Art Museum, Riga, Latvia on 7 June 1996 - 6 July 1996. The artists came from Latvia to Australia as migrants to make a new start. Venita Salnajs arrived in Sydney in 1949 and Reinis Zusters in Fremantle in 1950. In her Preface Venita Salnajs says that the joint exhibition not only celebrates a shared artistic life with Reinis for almost 30 years, but also is the celebration of their national duality. There are sections in both English and Latvian languages. (No ISBN in book. Unnumbered pages.).
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
EUR 79,64
Anzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 163 pages. 9.00x6.00x0.50 inches. In Stock.
Sprache: Englisch
Verlag: Amazon Digital Services LLC - KDP Print US, 2009
ISBN 10: 1439263701 ISBN 13: 9781439263709
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Taschenbuch. Zustand: Neu. Neuware.
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 324 | Sprache: Englisch | Produktart: Bücher | Uranium Processing and Properties describes developments in uranium science, engineering and processing and covers a broad spectrum of topics and applications in which these technologies are harnessed. This book offers the most up-to-date knowledge on emerging nuclear technologies and applications while also covering new and established practices for working with uranium supplies. The book also aims to provide insights into current research and processing technology developments in order to stimulate and motivate innovation among readers. Topics covered include casting technology, plate and sheet rolling, machining of uranium and uranium alloys, forming and fabrication techniques, corrosion kinetics, nondestructive evaluation and thermal modeling.
Sprache: Englisch
Verlag: Springer International Publishing, 2015
ISBN 10: 3319190083 ISBN 13: 9783319190082
Anbieter: moluna, Greven, Deutschland
EUR 89,99
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
Zustand: New. pp. 381.
EUR 137,52
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Sprache: Englisch
Verlag: Springer International Publishing, 2016
ISBN 10: 3319330934 ISBN 13: 9783319330938
Anbieter: moluna, Greven, Deutschland
EUR 100,39
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
Sprache: Englisch
Verlag: Springer International Publishing, Springer International Publishing, 2015
ISBN 10: 3319190083 ISBN 13: 9783319190082
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book focuses on the state-of-the-art developments in machining with nanomaterials. Numerous in-depth case studies illustrate the practical use of nanomaterials in industry, including how thin film nanostructures can be applied to solving machining problems and how coatings can improve tool life and reduce machining costs in an environmentally acceptable way. Chapters include discussions on, among other things:Comparisons of re-coated cutting tools and re-ground drillsThe modeling and machining of medical materials, particularly implants, for optimum biocompatibility including corrosion resistance, bio adhesiveness, and elasticityRecent developments in machining difficult-to-cut materials, as well as machining brittle materials using nanostructured diamond toolsSpindle Speed Variation (SSV) for machining chatter suppressionNano grinding with abrasives to produce micro- and nano fluidic devices.The importance of proper design of cutting tools, including milling tools, single point turning tools, and micro cutting tools is reinforced throughout the book. This is an ideal book for engineers in industry, practitioners, students, teachers, and researchers.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 161,51
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 161,51
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Taschenbuch. Zustand: Neu. Machining with Nanomaterials | Mark J. Jackson (u. a.) | Taschenbuch | xi | Englisch | 2016 | Springer | EAN 9783319330938 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Anbieter: GreatBookPrices, Columbia, MD, USA
EUR 186,34
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: As New. Unread book in perfect condition.
Sprache: Englisch
Verlag: Springer International Publishing, 2016
ISBN 10: 3319330934 ISBN 13: 9783319330938
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book focuses on the state-of-the-art developments in machining with nanomaterials. Numerous in-depth case studies illustrate the practical use of nanomaterials in industry, including how thin film nanostructures can be applied to solving machining problems and how coatings can improve tool life and reduce machining costs in an environmentally acceptable way. Chapters include discussions on, among other things:Comparisons of re-coated cutting tools and re-ground drillsThe modeling and machining of medical materials, particularly implants, for optimum biocompatibility including corrosion resistance, bio adhesiveness, and elasticityRecent developments in machining difficult-to-cut materials, as well as machining brittle materials using nanostructured diamond toolsSpindle Speed Variation (SSV) for machining chatter suppressionNano grinding with abrasives to produce micro- and nano fluidic devices.The importance of proper design of cutting tools, including milling tools, single point turning tools, and micro cutting tools is reinforced throughout the book. This is an ideal book for engineers in industry, practitioners, students, teachers, and researchers.
Zustand: New. pp. 384.
Zustand: New. pp. 313.
EUR 154,81
Anzahl: 1 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 2nd reprint edition. 396 pages. 9.25x6.10x0.93 inches. In Stock.
Taschenbuch. Zustand: Neu. Machining with Nanomaterials | Mark J. Jackson (u. a.) | Taschenbuch | xii | Englisch | 2010 | Springer | EAN 9781441946850 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Anbieter: GreatBookPrices, Columbia, MD, USA
EUR 206,52
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
EUR 201,08
Anzahl: 3 verfügbar
In den WarenkorbZustand: New.