Isbn: 9789401070089 - research and development of high temperature materials for industry (14 Ergebnisse)

Zustand: New.

Zustand: As New. Unread book in perfect condition.

Paperback. Zustand: New.

Zustand: New. In English.

Zustand: New. pp. 704.

Paperback. Zustand: Brand New. 704 pages. 9.25x6.10x1.59 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - List of Contents.- 1. Advanced High Temperature Materials.- 2. Materials Potential.- 2.1. Alloys.- 2.1.1. High Temperature Steels for Power Plant R.D. Townsend, CERL Leatherhead.- 2.1.2. Developments in Heat-Resisting Alloys for Petrochemical Plant J.J.Jones, Lake&Elliot Paramount Ltd.- 2.1.3. High Temperature, Oxidation-Resisting FeCrAl Steels S.R. Keown, Consultant Metallurgist.- 2.1.4. Superalloys, base: nickel, cobalt, iron and chromium C.H. White, Inco Alloys Ltd.- 2.1.5 Oxide Dispersion Strengthened (ODS) Alloys C.H. White, IncoAlloysLtd.- 2.1.6. Refractory Metals and Alloys Reck, Metallwerk Plansee GmbH.- 2.1.7. Titanium S.F. Pugh, Consultant Metallurgist.- 2.1.8. The Platinum Group Metals S.F. Pugh, Consultant Metallurgist.- 2.1.9. Intermetallic Compounds for High Temperature Use P. Costa, ONERA.- 2.2. Coatings.- 2.2.1. Claddings and Co-extruded Tubes T. Flatley, C.W. Morris, CEGB Leeds.- Coatings, Metallic and Ceramic (Thermal Barrier) for Turbine ApplicationsR. Mevrel,ONERA.- 2.3. Composites.- 2.3.1. Metal matrix Composites R. Warren, Chalmers University.- 2.3.2. Ceramic matrix Composites R. Warren, Chalmers University.- 2.4. Ceramics.- 2.4.1. Engineering Ceramics and Pyrolytic Materials D.J. Godfrey, Admiralty Research Establishment.- 2.4.2. Refractories J.T. van Konijnenburg, HoogovensB.V.- 3. Materials Production.- 3.1. Alloys.- 3.1.1. Alloy Production R. Brunetaud, Consultant Metallurgist.- R. Brunetaud, Consultant Metallurgist.- High Temperature Materials S.F. Pugh, Consultant Metallurgist.- 3.2. Ceramics and Refractories.- 3.2.1. Ceramics and Pyrolytic Materials D.J. Godfrey, Admiralty Research Establisment.- 3.2.2. Powder Production for Structural Ceramics F. Cambier, A. Leriche, CRIBC.- 3.3. Composites.- 3.3.1. Metal matrix Composites R. Warren, Chalmers University.- 3.3.2. Ceramic matrix Composites R. Warren, Chalmers University.- 3.4. Joining.- 3.4.1. Joining of Metallic Materials T.G. Gooch, Welding Institute.- 3.4.2. Joining of Advanced Ceramics for High Temperature Applications KM. Ostyn, Research Centre of the Belgian Welding Institute S.D. Peteves, Joint Research Centre, Petten A.C. Vinckier, State University Ghent.- 4. Materials Constraints in the High Temperature Industrial Technologies.- 4.1. Energy Production and Conversion -Fossil Energy.- 4.1.1. The Combustion Technologies D.B. Meadowcroft, CERL Leatherhead.- 4.1.2. Steam Cycle Power Plant D.B. Meadowcroft, CERL Leatherhead.- 4.1.3. Coal Gasification Materials for Plant Construction D.M. Lloyd, British Coal Corporation.- 4.1.4. Fuel Cells K Joon, S.B. v.d. Molen, E.H.P. Cordfunke, Netherlands Energy Centre.- 4.1.5. Magneto-hydrodynamic Energy Conversion F. Negrini, University of Bologna.- 4.2. Materials Constraints in Petrochemical Plant F.J. Vaes, Dow Chemicals B.V.- 4.3. High Temperature Materials Problems in Fusion and Fission Power Generation, S.F. Pugh, Consultant Metallurgist.- 4.4. Engines.- 4.4.1. Aero Gas Turbines S. Newsam, Rolls Royce pic.- 4.4.2. Marine Gas Turbines J.F.G. Conde, Materials Consultant.- 4.4.3. Turbines for Motor Vehicles J.F.G. Conde, Materials Consultant.- 4.4.4. Reciprocating Engines -Diesel- Otto D.J. Godfrey, Admiralty Research Establishment.- 4.6. Materials used in the Processing of Super alloys J. Morlet, Imphy SA.- 4.7. Materials for Sensors to be used at High Temperature O. De Pous, Eniricerche Monterondo.- 4.8. Materials for Furnaces D. Brun, Stein Heurtey SA.- 5. Optimisation of Components.- 5.1. Testing MetrologyM.S. Loveday, National Physical Laboratory.- 5.2. Prior Inspection/NDE W.N. Reynolds, NDT Centre, AERE Harwell.- 5.3. Design of Materials for Components.- 5.3.1. Basic Principles for Modelling of Deformation and Rupture D.R. Hayhurst. Sheffield University.- 5.3.2. Life Prediction and Residual Life Assessment G.W. Greenwood. Sheffield University.- 5.3.3. New Approach to Materials Design. Calculated Phase Equilibria for Composition and Structural Control T.G. Chart. T.I. Barry. National Physical Laboratory.- 5.3.4. Design Concepts for Ceramic Materials J. Lamon. Battelle Institute.- 5.3.5. Structural Design Methods and Rules for Metallic ComponentsOperating at High Temperatures F. Schubert. Kemforschungsanlage J¿lich.- 6. Future Trends in High Temperature Technology and the Implications for Materials R&D.- 7. Conclusions.…

Taschenbuch. Zustand: Neu. Research and Development of High Temperature Materials for Industry | E. Bullock (u. a.) | Taschenbuch | 680 S. | Englisch | 2011 | Springer | EAN 9789401070089 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu. …

Zustand: new. Questo è un articolo print on demand.

Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -List of Contents.- 1. Advanced High Temperature Materials.- 2. Materials Potential.- 2.1. Alloys.- 2.1.1. High Temperature Steels for Power Plant R.D. Townsend, CERL Leatherhead.- 2.1.2. Developments in Heat-Resisting Alloys for Petrochemical Plant J.J.Jones, Lake&Elliot Paramount Ltd.- 2.1.3. High Temperature, Oxidation-Resisting FeCrAl Steels S.R. Keown, Consultant Metallurgist.- 2.1.4. Superalloys, base: nickel, cobalt, iron and chromium C.H. White, Inco Alloys Ltd.- 2.1.5 Oxide Dispersion Strengthened (ODS) Alloys C.H. White, IncoAlloysLtd.- 2.1.6. Refractory Metals and Alloys Reck, Metallwerk Plansee GmbH.- 2.1.7. Titanium S.F. Pugh, Consultant Metallurgist.- 2.1.8. The Platinum Group Metals S.F. Pugh, Consultant Metallurgist.- 2.1.9. Intermetallic Compounds for High Temperature Use P. Costa, ONERA.- 2.2. Coatings.- 2.2.1. Claddings and Co-extruded Tubes T. Flatley, C.W. Morris, CEGB Leeds.- Coatings, Metallic and Ceramic (Thermal Barrier) for Turbine ApplicationsR. Mevrel,ONERA.- 2.3. Composites.- 2.3.1. Metal matrix Composites R. Warren, Chalmers University.- 2.3.2. Ceramic matrix Composites R. Warren, Chalmers University.- 2.4. Ceramics.- 2.4.1. Engineering Ceramics and Pyrolytic Materials D.J. Godfrey, Admiralty Research Establishment.- 2.4.2. Refractories J.T. van Konijnenburg, HoogovensB.V.- 3. Materials Production.- 3.1. Alloys.- 3.1.1. Alloy Production R. Brunetaud, Consultant Metallurgist.- R. Brunetaud, Consultant Metallurgist.- High Temperature Materials S.F. Pugh, Consultant Metallurgist.- 3.2. Ceramics and Refractories.- 3.2.1. Ceramics and Pyrolytic Materials D.J. Godfrey, Admiralty Research Establisment.- 3.2.2. Powder Production for Structural Ceramics F. Cambier, A. Leriche, CRIBC.- 3.3. Composites.- 3.3.1. Metal matrix Composites R. Warren, Chalmers University.- 3.3.2. Ceramic matrix Composites R. Warren, Chalmers University.- 3.4. Joining.- 3.4.1. Joining of Metallic Materials T.G. Gooch, Welding Institute.- 3.4.2. Joining of Advanced Ceramics for High Temperature Applications KM. Ostyn, Research Centre of the Belgian Welding Institute S.D. Peteves, Joint Research Centre, Petten A.C. Vinckier, State University Ghent.- 4. Materials Constraints in the High Temperature Industrial Technologies.- 4.1. Energy Production and Conversion -Fossil Energy.- 4.1.1. The Combustion Technologies D.B. Meadowcroft, CERL Leatherhead.- 4.1.2. Steam Cycle Power Plant D.B. Meadowcroft, CERL Leatherhead.- 4.1.3. Coal Gasification Materials for Plant Construction D.M. Lloyd, British Coal Corporation.- 4.1.4. Fuel Cells K Joon, S.B. v.d. Molen, E.H.P. Cordfunke, Netherlands Energy Centre.- 4.1.5. Magneto-hydrodynamic Energy Conversion F. Negrini, University of Bologna.- 4.2. Materials Constraints in Petrochemical Plant F.J. Vaes, Dow Chemicals B.V.- 4.3. High Temperature Materials Problems in Fusion and Fission Power Generation, S.F. Pugh, Consultant Metallurgist.- 4.4. Engines.- 4.4.1. Aero Gas Turbines S. Newsam, Rolls Royce pic.- 4.4.2. Marine Gas Turbines J.F.G. Conde, Materials Consultant.- 4.4.3. Turbines for Motor Vehicles J.F.G. Conde, Materials Consultant.- 4.4.4. Reciprocating Engines -Diesel- Otto D.J. Godfrey, Admiralty Research Establishment.- 4.6. Materials used in the Processing of Super alloys J. Morlet, Imphy SA.- 4.7. Materials for Sensors to be used at High Temperature O. De Pous, Eniricerche Monterondo.- 4.8. Materials for Furnaces D. Brun, Stein Heurtey SA.- 5. Optimisation of Components.- 5.1. Testing MetrologyM.S. Loveday, National Physical Laboratory.- 5.2. Prior Inspection/NDE W.N. Reynolds, NDT Centre, AERE Harwell.- 5.3. Design of Materials for Components.- 5.3.1. Basic Principles for Modelling of Deformation and Rupture D.R. Hayhurst. Sheffield University.- 5.3.2. Life Prediction and Residual Life Assessment G.W. Greenwood. Sheffield University.- 5.3.3. New Approach to Materials Design. Calculated Phase Equilibria for Composition an.…

Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. List of Contents.- 1. Advanced High Temperature Materials.- 2. Materials Potential.- 2.1. Alloys.- 2.1.1. High Temperature Steels for Power Plant R.D. Townsend, CERL Leatherhead.- 2.1.2. Developments in Heat-Resisting Alloys for Petrochemical Plant J.J.Jone. …

Zustand: New. Print on Demand pp. 704 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.

Zustand: New. PRINT ON DEMAND pp. 704.

Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -List of Contents.- 1. Advanced High Temperature Materials.- 2. Materials Potential.- 2.1. Alloys.- 2.1.1. High Temperature Steels for Power Plant R.D. Townsend, CERL Leatherhead.- 2.1.2. Developments in Heat-Resisting Alloys for Petrochemical Plant J.J.Jones, Lake&Elliot Paramount Ltd.- 2.1.3. High Temperature, Oxidation-Resisting FeCrAl Steels S.R. Keown, Consultant Metallurgist.- 2.1.4. Superalloys, base: nickel, cobalt, iron and chromium C.H. White, Inco Alloys Ltd.- 2.1.5 Oxide Dispersion Strengthened (ODS) Alloys C.H. White, IncoAlloysLtd.- 2.1.6. Refractory Metals and Alloys Reck, Metallwerk Plansee GmbH.- 2.1.7. Titanium S.F. Pugh, Consultant Metallurgist.- 2.1.8. The Platinum Group Metals S.F. Pugh, Consultant Metallurgist.- 2.1.9. Intermetallic Compounds for High Temperature Use P. Costa, ONERA.- 2.2. Coatings.- 2.2.1. Claddings and Co-extruded Tubes T. Flatley, C.W. Morris, CEGB Leeds.- Coatings, Metallic and Ceramic (Thermal Barrier) for Turbine ApplicationsR. Mevrel,ONERA.- 2.3. Composites.- 2.3.1. Metal matrix Composites R. Warren, Chalmers University.- 2.3.2. Ceramic matrix Composites R. Warren, Chalmers University.- 2.4. Ceramics.- 2.4.1. Engineering Ceramics and Pyrolytic Materials D.J. Godfrey, Admiralty Research Establishment.- 2.4.2. Refractories J.T. van Konijnenburg, HoogovensB.V.- 3. Materials Production.- 3.1. Alloys.- 3.1.1. Alloy Production R. Brunetaud, Consultant Metallurgist.- R. Brunetaud, Consultant Metallurgist.- High Temperature Materials S.F. Pugh, Consultant Metallurgist.- 3.2. Ceramics and Refractories.- 3.2.1. Ceramics and Pyrolytic Materials D.J. Godfrey, Admiralty Research Establisment.- 3.2.2. Powder Production for Structural Ceramics F. Cambier, A. Leriche, CRIBC.- 3.3. Composites.- 3.3.1. Metal matrix Composites R. Warren, Chalmers University.- 3.3.2. Ceramic matrix Composites R. Warren, Chalmers University.- 3.4. Joining.- 3.4.1. Joining of Metallic Materials T.G. Gooch, Welding Institute.- 3.4.2. Joining of Advanced Ceramics for High Temperature Applications KM. Ostyn, Research Centre of the Belgian Welding Institute S.D. Peteves, Joint Research Centre, Petten A.C. Vinckier, State University Ghent.- 4. Materials Constraints in the High Temperature Industrial Technologies.- 4.1. Energy Production and Conversion -Fossil Energy.- 4.1.1. The Combustion Technologies D.B. Meadowcroft, CERL Leatherhead.- 4.1.2. Steam Cycle Power Plant D.B. Meadowcroft, CERL Leatherhead.- 4.1.3. Coal Gasification Materials for Plant Construction D.M. Lloyd, British Coal Corporation.- 4.1.4. Fuel Cells K Joon, S.B. v.d. Molen, E.H.P. Cordfunke, Netherlands Energy Centre.- 4.1.5. Magneto-hydrodynamic Energy Conversion F. Negrini, University of Bologna.- 4.2. Materials Constraints in Petrochemical Plant F.J. Vaes, Dow Chemicals B.V.- 4.3. High Temperature Materials Problems in Fusion and Fission Power Generation, S.F. Pugh, Consultant Metallurgist.- 4.4. Engines.- 4.4.1. Aero Gas Turbines S. Newsam, Rolls Royce pic.- 4.4.2. Marine Gas Turbines J.F.G. Conde, Materials Consultant.- 4.4.3. Turbines for Motor Vehicles J.F.G. Conde, Materials Consultant.- 4.4.4. Reciprocating Engines -Diesel- Otto D.J. Godfrey, Admiralty Research Establishment.- 4.6. Materials used in the Processing of Super alloys J. Morlet, Imphy SA.- 4.7. Materials for Sensors to be used at High Temperature O. De Pous, Eniricerche Monterondo.- 4.8. Materials for Furnaces D. Brun, Stein Heurtey SA.- 5. Optimisation of Components.- 5.1. Testing MetrologyM.S. Loveday, National Physical Laboratory.- 5.2. Prior Inspection/NDE W.N. Reynolds, NDT Centre, AERE Harwell.- 5.3. Design of Materials for Components.- 5.3.1. Basic Principles for Modelling of Deformation and Rupture D.R. Hayhurst. Sheffield University.- 5.3.2. Life Prediction and Residual Life Assessment G.W. Greenwood. Sheffield University.- 5.3.3. New Approach to Materials Design. Calculated Phase Equilibria for Composition and St.…