advances engineering design simulation (116 Ergebnisse)

Zustand: Very Good. This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .

1st ed. 2020. XIX, 407 p. Softcover. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Sprache: Englisch.

Zustand: Hervorragend. Zustand: Hervorragend | Seiten: 360 | Sprache: Englisch | Produktart: Bücher.

Taschenbuch. Zustand: Neu. Neuware -This book consists of selected peer-reviewed papers presented at the NAFEMS India Regional Conference (NIRC 2018). It covers current topics related to advances in computer aided design and manufacturing. The book focuses on the latest developments in engineering modelling and simulation, and its application to various complex engineering systems. Finite element method/finite element analysis, computational fluid dynamics, and additive manufacturing are some of the key topics covered in this book. The book aims to provide a better understanding of contemporary product design and analyses, and hence will be useful for researchers, academicians, and professionals.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 360 pp. Englisch.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between mechanical and chemical engineering, emphasizing design, simulation, and manufacturing. Specifically, it covers recent developments in the mechanics of solids and structures, numerical simulation of coupled problems, including fatigue, fluid behavior, particle movement, pressure distribution. Further, it reports on developments in chemical process technology, heat and mass transfer, energy-efficient technologies, and industrial ecology. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this second volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues. Specifically, it covers the development of CAx technologies for product design, the implementation of smart manufacturing systems and Industry 4.0 strategies, topics in technological assurance, numerical simulation and experimental studies on cutting, milling, grinding, pressing and profiling processes, as well as the development and implementation of new advanced materials. Based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020 in Kharkiv, Ukraine, this first volume in a two-volume set provides academics and professionals with extensive information on the latest trends, technologies, challenges and practice-oriented lessons learned in the above-mentioned areas.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book explores topics at the interface between mechanical and chemical engineering, with a focus on design, simulation, and manufacturing. Covering recent developments in the mechanics of solids and structures; numerical simulation of coupled problems, including wearing, compression, detonation and collision; and chemical process technologies, including ultrasonic technology, capillary rising process, pneumatic classification, membrane electrolysis and absorption processes, it reports on developments in the field of heat and mass transfer, energy-efficient technologies, and industrial ecology. Part of a two-volume set based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020, in Kharkiv, Ukraine, this book provides academics and professionals with extensive information on the latest trends, technologies and challenges in the field as well as practical lessons learned.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between mechanical and chemical engineering, emphasizing aspects related to design, simulation, and manufacturing. It covers recent findings concerning the mechanics of fluids, solids, and structures, and numerical and computational methods for solving coupled problems in manufacturing. Further, it reports on recent developments in chemical process technology, heat and mass transfer research, and energy-efficient technologies, describing applications in the food and energy production sector. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this second volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on product design and advanced manufacturing processes, intelligent solutions for Industry 4.0, covers topics in ICT for engineering education, describes the numerical simulation and experimental studies of milling, honing, burnishing, grinding, boring, and turning, as well as the development and implementation of advanced materials. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this first volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on advances in mechanical engineering, with a special emphasis on innovative design approaches, constructions and working processes, and on intelligent devices. It discusses physical aspects during pressing and vibrational processing, and findings relating to static stiffness and wear resistance. Further chapters report on the modeling and simulation of mechanical systems using mathematical modeling, numerical simulation, and experimental studies. This book also describes the use of LabVIEW, an infrared camera, and acoustic technology for the control and diagnostic of air leaks and radial runout of gear wheels. It discusses topics concerning the efficiency of systems and processes, reporting on new strategies for improving the design and operation of hydraulic machine rotors, screw and roller presses, and homogenizers, among others. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this second volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on advances in manufacturing, with a special emphasis on smart and sustainable systems and strategies. It covers advances in additive manufacturing, multi-pin ultrasonic peening, shot peening, and hot isostatic pressing; topics in stamping, injection moulding, assembly processes; strategies for improving the durability and service life of engineering products and machines; advances in machining processes, particularly milling and vibro-abrasive methods; and industrial robotics. Chapters report on theoretical research, mathematical modeling, and experimental studies concerning the design engineering of robots and machine tools, alike. They also discuss key aspects of quality assurance of products for milling and moulding processes, as well as multiaxis machining in flexible fixtures. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this first volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned areas.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on advances in materials engineering, with a special emphasis on applying innovative approaches in coatings and protective technologies, particularly in the synthesis of new nanostructures, multilayer coatings, and ensuring antibacterial properties. It discusses wear behaviour for ferrous and non-ferrous materials. Further chapters report on the performance properties and mechanical characterization of composite and polymer materials for building efficiency and filtration applications. They also cover research results on cellulose, paper, and textile materials, focusing on strength properties. Yet, this book also describes innovative methods in engineering education, particularly the use of smart complexes and simulations to enhance students competencies growth based on professional, environmental, and economic culture. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this third volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned areas.

Zustand: New. 1st ed. 2023 edition NO-PA16APR2015-KAP.

Zustand: New. In.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on smart and sustainable manufacturing. It describes innovative research in design engineering and manufacturing technology, covering the development and characterization of advanced materials alike. It also discusses key aspects related to ICT in engineering education. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this first volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.

paperback. Zustand: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!