Gesamtpreis (1 Artikel Artikel):
Versandziel:
developments injection moulding (37 Ergebnisse)
Direkt zu den wichtigsten Suchergebnissen
Suchfilter
Produktart
- Alle Product Types
- Bücher (37)
- Magazine & Zeitschriften (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Comics (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Noten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Kunst, Grafik & Poster (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Fotografien (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Karten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Manuskripte & Papierantiquitäten (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Zustand Mehr dazu
- Neu (30)
- Wie Neu, Sehr Gut oder Gut Bis Sehr Gut (2)
- Gut oder Befriedigend (4)
- Ausreichend oder Schlecht (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Wie beschrieben (1)
Weitere Eigenschaften
- Erstausgabe (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Signiert (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
- Schutzumschlag (1)
- Angebotsfoto (19)
- Keine Print-on-Demand Angebote (20)
Sprache (2)
Gratisversand
- Kostenloser Versand nach USA (Keine weiteren Ergebnisse entsprechen dieser Verfeinerung)
Land des Verkäufers
Verkäuferbewertung
-
Developments in Injection Moulding?1: v. 1
Sprache: Englisch
Verlag: Kluwer Academic Publishers, 1978
ISBN 10: 0853347980 ISBN 13: 9780853347989
Anbieter: BoundlessBookstore, Wallingford, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 8,32
EUR 8,06 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbHardcover. Zustand: Good. Light wear to boards. Content is clean with slilght age tone. Good DJ with light wear.
-
Neue Entwicklungen für die Simulation des Spritzgiessprozesses von Thermoplasten = new developments for the simulation of the injection moulding process of thermoplastics. Dissertation.
Verlag: Aachen, 1988
Anbieter: Wissenschaftliches Antiquariat Köln Dr. Sebastian Peters UG, Köln, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Broschur. Zustand: gut. 127, A 12 S. : Ill., graph. Darst. ; 21 cm, Aufkleber, Bibliotheksexemplar, Dreieckstasche. Sprache: deu.
-
Developments in Injection Moulding?3
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 60,39
EUR 13,83 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Zustand: New. pp. 340.
-
Developments in Injection Moulding 3 (Developments Series)
Sprache: Englisch
Verlag: Elsevier Science Publishing Company, 1985
ISBN 10: 0853343667 ISBN 13: 9780853343660
Anbieter: Zubal-Books, Since 1961, Cleveland, OH, USA
Verkäuferbewertung 5 von 5 Sternen
Zustand: Good. *Price HAS BEEN REDUCED by 10% until Monday, June 1 (weekend SALE item)* 324 pp., hardcover, ex library, else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
-
Neue Entwicklungen für die Simulation des Spritzgiessprozesses von Thermoplasten = new developments for the simulation of the injection moulding process of thermoplastics
Verlag: Aachen : IKV TH Aachen, 1988
Anbieter: Roland Antiquariat UG haftungsbeschränkt, Weinheim, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Softcover. 127, A 12 S. : Ill., graph. Darst. ; 21 cm Guter Zustand. Leseseiten sind sauber und ohne Markierungen. Ausgeschiedenes Bibliotheksexemplar mit entsprechender Kennzeichnung. Buch weist leichte Lager- bzw. Gebrauchsspuren auf. Sonst ordentliches Exemplar. Altersfreigabe FSK ab 0 Jahre Sprache: Deutsch Gewicht in Gramm: 1000.
-
Developments in Injection Moulding¿3
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - In the field of polymer technology, injection moulding is the most important moulding process. Because of the size of that industry and the rate of development which it attracts, it is impossible to present, in a single reasonably sized volume, all of the developments that have taken place in recent years. The purpose of this book is therefore to present selected topics which contribute to, or exemplify, develop ments in this important area. Each year considerable development takes place in the area of machine and process control and these developments receive con siderable publicity in the trade press. Another area which advances at the same pace, but which seems to receive far less publicity, although it is equally important, is the area of mould design and manufacture. It is important because profitability is dependent upon the design, manufacture and operation of the mould. It is for this reason that several chapters relating to mould design have been included in this, the third volume in this series. The topics covered include advances in mould manufacture, the use of runnerless systems to aid productivity, and others showing how the applications of computers can greatly assist the moulder to obtain a more productive unit.
-
Developments in Injection Moulding?1
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 115,17
EUR 13,83 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Zustand: New. pp. 300.
-
EUR 92,27
EUR 48,99 Versand
Versand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
-
Developments in Injection Moulding-1
Sprache: Englisch
Verlag: Applied Science Publishers Ltd, 2013
ISBN 10: 9400996519 ISBN 13: 9789400996519
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 151,27
EUR 11,54 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 300 pages. 8.50x5.51x0.68 inches. In Stock.
-
Developments in Injection Moulding¿1
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Injection moulding is the most important moulding process used by the plastics industry and some idea of its importance can be obtained by considering the following figures. The value of the UK market for plastics processing equipment was Pds. 60 million in 1977. Of this sum, Pds. 23 million was spent on injection moulding machines, that is, 40 % of all the money spent on plastics processing equipment in the UK. It has been estimated that one-third of all plastics materials are processed by injection moulding. At the present time the process is of greater importance to the thermoplastics industry but its relevance to the thermoset industry should not be ignored. Most ofthe equipment now used is based on single-screw pre-plasticising units. Once these machines had become established, in the 1960s, it was felt that the ultimate had been reached in machine design and utilisation. However, since that time, machines, processes and materials have undergone extensive development to make injection moulding safer, more reliable, easier to use and more economical to operate. The purpose ofthis book is to review some of the developments that have taken place in this very important area. These developments are described by specialists in the field, who have extensive industrial experience and whose contribution will therefore be of immediate relevance to those concerned with the usage and application of this, the most important plastics moulding process.
-
Developments in Injection Moulding
Anbieter: Better World Books Ltd, Dunfermline, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 189,92
EUR 5,77 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
In den WarenkorbZustand: Very Good. Former library copy. Pages intact with possible writing/highlighting. Binding strong with minor wear. Dust jackets/supplements may not be included. Includes library markings. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good.
-
Developments in Injection Moulding
Sprache: Englisch
Verlag: Applied Science Publishers, 1981
ISBN 10: 0853349681 ISBN 13: 9780853349686
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 216,77
EUR 17,31 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
-
Developments in Injection Moulding (Developments Series) (v. 2) Improving Efficiency
Sprache: Englisch
Verlag: Applied Science Publishers, 1981
ISBN 10: 0853349681 ISBN 13: 9780853349686
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 224,73
EUR 13,83 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
-
Developments in Injection Moulding
Sprache: Englisch
Verlag: Applied Science Publishers, 1981
ISBN 10: 0853349681 ISBN 13: 9780853349686
Anbieter: GreatBookPrices, Columbia, MD, USA
Verkäuferbewertung 5 von 5 Sternen
EUR 239,15
EUR 2,26 Versand
Versand innerhalb von USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
-
Developments in Injection Moulding
Sprache: Englisch
Verlag: Applied Science Publishers, 1981
ISBN 10: 0853349681 ISBN 13: 9780853349686
Anbieter: GreatBookPrices, Columbia, MD, USA
Verkäuferbewertung 5 von 5 Sternen
EUR 240,00
EUR 2,26 Versand
Versand innerhalb von USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: As New. Unread book in perfect condition.
-
Developments in Injection Moulding
Sprache: Englisch
Verlag: Applied Science Publishers, 1981
ISBN 10: 0853349681 ISBN 13: 9780853349686
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes Königreich
Verkäuferbewertung 5 von 5 Sternen
EUR 246,55
EUR 17,31 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: As New. Unread book in perfect condition.
-
Zustand: New. pp. 364.
-
Developments in Injection Moulding
Sprache: Englisch
Verlag: Springer Netherlands, Springer Netherlands, 1981
ISBN 10: 0853349681 ISBN 13: 9780853349686
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering.
-
Developments in Injection Moulding 3 (eng)
Anbieter: Brook Bookstore On Demand, Napoli, NA, Italien
Verkäuferbewertung 3 von 5 Sternen
EUR 46,22
EUR 5,50 Versand
Versand von Italien nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: new. Questo è un articolo print on demand.
-
Developments in Injection Moulding-3
Sprache: Englisch
Verlag: Springer, Springer Dez 2011, 2011
ISBN 10: 9401086923 ISBN 13: 9789401086929
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In the field of polymer technology, injection moulding is the most important moulding process. Because of the size of that industry and the rate of development which it attracts, it is impossible to present, in a single reasonably sized volume, all of the developments that have taken place in recent years. The purpose of this book is therefore to present selected topics which contribute to, or exemplify, develop ments in this important area. Each year considerable development takes place in the area of machine and process control and these developments receive con siderable publicity in the trade press. Another area which advances at the same pace, but which seems to receive far less publicity, although it is equally important, is the area of mould design and manufacture. It is important because profitability is dependent upon the design, manufacture and operation of the mould. It is for this reason that several chapters relating to mould design have been included in this, the third volume in this series. The topics covered include advances in mould manufacture, the use of runnerless systems to aid productivity, and others showing how the applications of computers can greatly assist the moulder to obtain a more productive unit. 340 pp. Englisch.
-
Developments in Injection Moulding-3
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 77,81
EUR 7,50 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
In den WarenkorbZustand: New. Print on Demand pp. 340 23:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on White w/Gloss Lam.
-
Developments in Injection Moulding-3
Anbieter: Biblios, Frankfurt am main, HESSE, Deutschland
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. PRINT ON DEMAND pp. 340.
-
Developments in Injection Moulding?1 (eng)
Anbieter: Brook Bookstore On Demand, Napoli, NA, Italien
Verkäuferbewertung 3 von 5 Sternen
EUR 86,24
EUR 5,50 Versand
Versand von Italien nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: new. Questo è un articolo print on demand.
-
EUR 48,37
EUR 48,99 Versand
Versand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. In the field of polymer technology, injection moulding is the most important moulding process. Because of the size of that industry and the rate of development which it attracts, it is impossible to present, in a single reasonably sized volume, all of the d.
-
Developments in Injection Moulding¿1
Sprache: Englisch
Verlag: Springer Netherlands Okt 2011, 2011
ISBN 10: 9400996519 ISBN 13: 9789400996519
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Injection moulding is the most important moulding process used by the plastics industry and some idea of its importance can be obtained by considering the following figures. The value of the UK market for plastics processing equipment was Pds. 60 million in 1977. Of this sum, Pds. 23 million was spent on injection moulding machines, that is, 40 % of all the money spent on plastics processing equipment in the UK. It has been estimated that one-third of all plastics materials are processed by injection moulding. At the present time the process is of greater importance to the thermoplastics industry but its relevance to the thermoset industry should not be ignored. Most ofthe equipment now used is based on single-screw pre-plasticising units. Once these machines had become established, in the 1960s, it was felt that the ultimate had been reached in machine design and utilisation. However, since that time, machines, processes and materials have undergone extensive development to make injection moulding safer, more reliable, easier to use and more economical to operate. The purpose ofthis book is to review some of the developments that have taken place in this very important area. These developments are described by specialists in the field, who have extensive industrial experience and whose contribution will therefore be of immediate relevance to those concerned with the usage and application of this, the most important plastics moulding process. 300 pp. Englisch.
-
Developments in Injection Moulding-3
Sprache: Englisch
Verlag: Springer, Springer Dez 2011, 2011
ISBN 10: 9401086923 ISBN 13: 9789401086929
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Verkäuferbewertung 5 von 5 Sternen
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In the field of polymer technology, injection moulding is the most important moulding process. Because of the size of that industry and the rate of development which it attracts, it is impossible to present, in a single reasonably sized volume, all of the developments that have taken place in recent years. The purpose of this book is therefore to present selected topics which contribute to, or exemplify, develop ments in this important area. Each year considerable development takes place in the area of machine and process control and these developments receive con siderable publicity in the trade press. Another area which advances at the same pace, but which seems to receive far less publicity, although it is equally important, is the area of mould design and manufacture. It is important because profitability is dependent upon the design, manufacture and operation of the mould. It is for this reason that several chapters relating to mould design have been included in this, the third volume in this series. The topics covered include advances in mould manufacture, the use of runnerless systems to aid productivity, and others showing how the applications of computers can greatly assist the moulder to obtain a more productive unit.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 340 pp. Englisch.
-
Developments in Injection Moulding-1
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
Verkäuferbewertung 4 von 5 Sternen
EUR 135,05
EUR 7,50 Versand
Versand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
In den WarenkorbZustand: New. Print on Demand pp. 300 22:B&W 5.5 x 8.5 in or 216 x 140 mm (Demy 8vo) Perfect Bound on White w/Gloss Lam.
-
Developments in Injection Moulding-1
Anbieter: Biblios, Frankfurt am main, HESSE, Deutschland
Verkäuferbewertung 4 von 5 Sternen
Zustand: New. PRINT ON DEMAND pp. 300.
