Generative manufacturing optical thermal (12 Ergebnisse)
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 163,72
EUR 13,81 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Softcover
Anbieter: GreatBookPrices, Columbia, MD, USAGreatBookPrices
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 180,48
EUR 2,30 VersandVersand innerhalb von USAAnzahl: 15 verfügbar
Zustand: New.
- Softcover
Anbieter: Buchpark, Trebbin, , DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Gut
EUR 85,09
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Zustand: Gut. Zustand: Gut | Sprache: Englisch | Produktart: Bücher | The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on generative manufacturing… for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept.
- Softcover
Anbieter: GreatBookPrices, Columbia, MD, USAGreatBookPrices
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Wie neu
EUR 195,24
EUR 2,30 VersandVersand innerhalb von USAAnzahl: 15 verfügbar
Zustand: As New. Unread book in perfect condition.
- Softcover
Anbieter: Buchpark, Trebbin, , DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht
EUR 90,70
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 4 verfügbar
Zustand: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on genera…tive manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept.
- Softcover
Anbieter: Books Puddle, New York, NY, USABooks Puddle
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 209,30
EUR 3,48 VersandVersand innerhalb von USAAnzahl: 4 verfügbar
Zustand: New. 1st ed. 2022 edition NO-PA16APR2015-KAP.
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 140,00
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK) | Roland Lachmayer (u. a.) | Taschenbuch | xiii | Englisch | 2022 | Springer | EAN 9783030965006 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]sprin…ger[dot]com | Anbieter: preigu.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 160,49
EUR 61,50 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on generative man…ufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept.
- Softcover
- Print-on-Demand
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, , DeutschlandBuchWeltWeit Ludwig Meier e.K.
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 160,49
EUR 23,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based o…n generative manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept. 172 pp. Englisch.
- Softcover
- Print-on-Demand
Anbieter: Majestic Books, Hounslow, , Vereinigtes KönigreichMajestic Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 218,76
EUR 7,50 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
Zustand: New. Print on Demand.
Sprache: Englisch
Verlag: Springer, Springer International Publishing Apr 2022 2022
- Softcover
- Print-on-Demand
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschlandbuchversandmimpf2000
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 160,49
EUR 60,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The book describes and explains the results of the collaborative project Generative Manufacturing of Optical, Thermal and Structural Components over the last three years. The overall goal is the development of a system concept based on ge…nerative manufacturing for integrated optical and optomechanical systems. Different developed generative manufacturing processes for glass and specially designed metal powders have been implemented in a single fabrication set up enabling multi-material manufacturing of optical components and systems. The main focus of the project is split into several topics: simulation, design, material engineering, process engineering, post-processing and component evaluation. The simulation of the glass printing process will be structured iteratively with a comparison of the experimental results in order to be able to finally make a prediction of the necessary parameter sizes for defined components. A metal material with similar thermal conductivity and thermal expansion properties to glass or laser-active crystals has been developed iteratively over the course of the project to enable direct printing onto these materials. In order to demonstrate the potential of generatively manufactured optomechanics for function-integrated systems, the optomechanical components required for a solid-state laser system are manufactured in a polymer-based 3D printing process and their properties are characterized. All these individual projects of the overall network are combined in the system concept.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 172 pp. Englisch.
- Softcover
- Print-on-Demand
Anbieter: Biblios, frankfurt am main, HESSE, DeutschlandBiblios
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 219,61
EUR 9,95 VersandVersand von Deutschland nach USAAnzahl: 4 verfügbar
Zustand: New. PRINT ON DEMAND.
