Injection moulding plastics (21 Ergebnisse)

Zustand: New. pp. 325.

Zustand: New. pp. 325.

Zustand: New. pp. 325.

Soft cover. Zustand: New. 294pp.The book covers Soap Industries Raw Materials, Soaps Manufacture on Tiny Scale, Equipments for Tiny Cottage Scale Soap Industry, Soap from Non Edible Oils, Soap from Crudeÿ Soap Stock, Soap from Mixed Fatty Acid, Soaps Manufacturing in Medium and Large Scale Sector, Laundry Soap Manufacturing, Toilet Soap Manufacturing, Soap Manufacturing From Fatty Acids, Manufacturing of Transparent Soaps, Manufacturing of Liquid Soaps, Manufacturing of Soft Soaps, Manufacturing of Medicated Soaps, Manufacturing of Shaving Soaps, Manufacturing of Shaving Creams, Synthetic Detergent Powders, Manufacturing of Spray Dried Powder, Enzyme Detergents Manufacturing, Manufacturing of Liquid and Paste Detergents, Detergent Cakes and Bars, Plant and Machinery for Small Scale Detergents Cakes Manufacture, Testing and Analysis, Determination of Physical Characteristics of Detergents,ÿ Laundry Soap Manufacturing and Technology, Toilet Soap Manufacture, Equipment andÿ Machinery for Small Scale Soap Manufacture, Project Profiles, Detergent Washing Powder Arial Type, Acid Slurry L.A.B.S., Detergent Cake and Powder,ÿ Laundry and Drycleaner, Liquid Soap, Detergent Powder Nirma Type, Nero laundry Soap, Detergent Paste Concentrate, Soap Industry Soap From Soap Stock, Toiletÿ Soap, Zeolite A For Detergent, Cleanining Powder Vim Type, Liquid Detergents for Wood, Detergent Paste Textile Grade, suppliers and Manufacturers of Raw Materials, Suppliers Manufacturers of Plant and Machinery for Soap and Detergents. …

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Clean from markings. In good all round condition. Dust jacket in good condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,500grams, ISBN.…

Zustand: Poor. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In poor condition, suitable as a reading copy. Dust jacket in poor condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,500grams, ISBN.…

Zustand: New.

Zustand: New.

Hardcover. Zustand: Very Good+ EX-LIBRARY. No Jacket. London:: ILIFFE Books Ltd / Published for the Plastics Institute, 1966. A square, tight copy. Inner hinges are perfect. Sharp corners. Stamped "WITHDRAWN" on the endpapers. Text pages are clean and unmarked. No underlining. No highlighting. No margin notes. Includes a preface and 6 chapters, as follows: 1) History and development; 2) The principal elements in injection moulding; 3) Characteristics of injection moulding materials; 4) Applied techniques; 5) Finishing of injection mouldings; 6) Compression moulding of thermoplastic materials. Illustrated with many line drawings and 12 photographic plates. Index. Bound in the original maroon boards, lettered in shiny gold on the spine. Hard Cover. Very Good+ EX-LIBRARY./No Jacket. 8vo. xii, 257pp.…

Hardcover. Zustand: VG+. Zustand des Schutzumschlags: VG+. 1st Thus. 227 pages.

Soft cover. Zustand: New. 1st Edition. The book covers Technology of Blow Moulding, Blow Moulding Process,Internal Cooling for the Blow Molding Industry, Multiaspect Analyzes of Blow Moulding Process, Plastic Bottle Blow Moulding, PET Blow Moulding Machines,Rotational Blow Moulding Process, Moulds, Rotational Blow Moulding Machinery, Materials for Rotational Blow Moulding, Quality Control in Rotational Blow Moulding, Plant Economics of blow Moulded Plastic Containers, Plant Economics of HDPE, PVC and CPVC Pipes and Fittings, Plant Economics of Injection and Blow Moulded Plastic Products, Plant Economics of Injection Moulded Plastic Autoparts, Plant Economics of Injection Moulding of Chairs, Plant Economics of Injection Moulding Unit, Plant Economics of PET Bottles Recycling Plant , Plant Economics of PET Injection moulding used Mainly for Mineral Water Packing (PET Preform), Plant Economics of Pet Preform and pet Jars, Plant Economics of Plastic Water Storage Tanks, Plant Economics of uPVC Windows from uPVC Profiles. …

Hardcover. Zustand: Near Fine EX-LIBRARY. No jacket. First Edition in English. London: ILIFFE Books Ltd., 1964. Near Fine EX-LIBRARY. A bright, square, reasonably tight copy. Sharp corners. Inner hinges are perfect. "WITHDRAWN" stamps, and a few other library markings on the endpapers. Text pages are clean. No underlining. No highlighting. No margin notes. Translated from the 1961 German edition. Edited for the English edition by E. G. Fisher. Illustrated with figures, photos, and dozens of technical drawings (one folding). Tables. Bibliographical references. Index. Bound in the original light blue boards, lettered in shiny gold on the spine. . First Edition in English. Hardcover. Near Fine EX-LIBRARY/No jacket. 8vo. (ix), 164pp.…

Soft cover. Zustand: Very Good. paperback, 4to, 186pp, photo illustrations and diagrams, owner's name on title page, text clean and tight, card covers, Very Good condition.

Zustand: Fair. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. Book contains pencil markings. In fair condition, suitable as a study copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,500grams, ISBN.…

Zustand: Fair. Volume 2. This is an ex-library book and may have the usual library/used-book markings inside.This book has hardback covers. In fair condition, suitable as a study copy. No dust jacket. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,550grams, ISBN.…

Soft cover. Zustand: New. 1st Edition. Contents: 1. Properties and applications of speciality plastics. 2. Formation of urethane foams. 3. Flexible foams. 4. Rigid foams. 5. One-stage injection stretch blow moulding. 6. Injection blow moulding. 7. Pet material and applications. 8. Injection and co-injection preform technologies. 9. Pet film and sheet. 10. Plastics as safe and hygienic medium for packaging food and food products. 11. Two stage injection stretch blow moulding. Polyester or polyethylene terephthalate (PET) is an unreinforced, semi-crystalline thermo-plastic polyester derived from polyethylene terephthalate. Its excellent wear resistance, low coefficient of friction, high flexural modulus, and superior dimensional stability make it a versatile material for designing mechanical and electro-mechanical parts. PET is fully recyclable and can be easily reprocessed into many other products for many different applications. However, unlike paper and other cellulose products, PET does not readily decompose. However, biodegradable additives are available that enhance the biodegradation of this plastic without affecting the physical properties. Formation of a flexible polyurethane foam is an intricate process employing unique hardware, multiple ingredients and at least two simultaneous reactions. The urethane forming reaction occurs between the isocyanate and the polyol. Polyurethanes, also known as polycarbamates, belong to a larger class of compounds called polymers. Polyurethanes can be produced in four different forms including elastomers, coatings, flexible foams, and cross-linked foams. Elastomers are materials that can be stretched but will eventually return to their original shape. They are useful in applications that require strength, flexibility, abrasion resistance and shock absorbing qualities. Thermoplastic polyurethane elastomers can be molded and shaped into different parts. This makes them useful as base materials for automobile parts, ski boots, roller skate wheels, cable jackets, and other mechanical goods. When these elastomers are spun into fibers they produce a flexible material called spandex. Spandex is used to make sock tops, bras, support hose, swimsuits, and other athletic apparel. Co-injection is the process of injecting two resins simultaneously through a single gate to form a multi-layer structure. Recently, there has been a re-emergence of interest in co-injection technology spurred on by the development of new resins, barrier systems, controls, and hardware technologies. Increasing demand of polyethylene terephthalate (PET) from food and beverage sector like in carbonated soft drinks packaging, increase demand for packaged food due to rise in consumption of frozen and processed food, rise in demand for electronics and automotive applications/industries and ecofriendly substitution are the most important driving factors in the polyethylene terephthalate market. Also, rapid urbanization, innovative packaging and high economic growth is contribution in increasing the demand for polyethylene terephthalate regardless of the geographical location. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.…

Softcover. 1. Aufl. 153 S. : Ill., graph. Darst. ; 21 cm Guter Zustand. Leseseiten sind sauber und ohne Markierungen. Ausgeschiedenes Bibliotheksexemplar mit entsprechender Kennzeichnung. Buch weist leichte Lager- bzw. Gebrauchsspuren auf. Sonst gutes Exemplar 9783860731192 Sprache: Deutsch Gewicht in Gramm: 1000.…

Hardcover. Zustand: Brand New. 657 pages. 9.50x6.50x1.50 inches. In Stock.

8° , gebundene Ausgabe. Zustand: Gut. 227 S. Ehem. Bibliotheksexemplar (Literarische Abteilung der Metallgesellschaft A.G., Frankfurt). Etikettierung am Buchrücken, Stempel und Vermerke auf dem Titelblatt Innen sauber und ohne Anstreichungen. Sprache: Englisch Gewicht in Gramm: 450.

Couverture rigide. Zustand: bon. RO60110165: 1964. In-8. Relié. Bon état, Couv. convenable, Dos satisfaisant, Intérieur frais. 164 pages. Illustré de nombreux schémas et de quelques photos en noir et blanc, dans le texte. Tranche de tête rouge. Avec Jaquette. . . Classification Dewey : 420-Langue anglaise. Anglo-saxon.…

Hardcover. Zustand: Brand New. 657 pages. 9.50x6.50x1.50 inches. In Stock. This item is printed on demand.