organic additives ceramic processing von shanefield daniel (27 Ergebnisse)

hardcover. Zustand: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!

Zustand: Good. 330 pp., hardcover, ex library, else text and binding clean and tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country. Photos available upon request.

Zustand: New. In.

Hardcover. Zustand: Fine. SECOND EDITION. "general electric fore-edge stamp, otherwise as new, unread condition.

Zustand: New. pp. 328.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject, including the ceramic processes, organic chemical structures, polymers, colloid science and others, starting from fundamental principles, with many literature references for further reading. After the fundamentals, detailed case studies from industrial applications are described for the optimization of solvents, dispersants, binders, plasticizers, lubricants and some minor additives. A wide range of information is covered, beginning with fundamental equations for students, and extending to advanced applications for development workers and factory problem solvers. Shanefield undertook this ambitious task only because of the previous lack of resources that address the growing need for detailed information on organic additives for ceramics. Suitable for use as a textbook and as a reference source for working ceramists and chemists who wish to supply the ceramics industry with additives.

Hardcover. Zustand: Very Good. Very Good. Dust Jacket may NOT BE INCLUDED.CDs may be missing. SHIPS FROM MULTIPLE LOCATIONS. book.

Zustand: New. In.

Gebunden. Zustand: New.

hardcover. Zustand: New. In shrink wrap. Looks like an interesting title!

Zustand: New. A textbook and a reference source for working ceramists. It presents information on topics such as high solids loadings in slips, applying external lubricants after spray drying, optimizing dry pressing, achieving very high green density, and some logical thinking procedures for solving industrial problems. Num Pages: 316 pages, biography. BIC Classification: TDCQ. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 20. Weight in Grams: 653. . 1996. 2nd ed. 1996. Hardback. . . . .

Zustand: New. pp. 340 2nd Edition.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This volume is intended to be used as a textbook for teaching pur poses and also as a reference source for working engineers. Therefore, a wide range of subject matter must be covered, starting with funda mental explanations for students, and extending to advanced applica tions for development workers and factory problem-solvers. Such an ambitious task is being attempted only because of the present lack of resources which might otherwise fill the need. The author planned the book for use as the primary text in an un dergraduate course in processing, which he teaches at Rutgers University. However, the book could also be used as a supplementary text for more general courses in related subjects. Powder metallurgy, printing inks, and paints involve many of the same organic additives as ceramic processing. These specialized fields of technology are usually covered somewhat by very general college courses in metallurgy, materials science, and chemical engineering, but there appears to be a need for more specific training in the area of the organic additives used in those fields. The formulators, for lack of confidence and better understanding, often rely on simple waxes or acrylates, when a higher level of technological knowledge could provide improved results. It is intended that this book will be useful as a supplementary source of information for those fields also, both as a self-teaching tool and for college coursework.

Zustand: New. A textbook and a reference source for working ceramists. It presents information on topics such as high solids loadings in slips, applying external lubricants after spray drying, optimizing dry pressing, achieving very high green density, and some logical thinking procedures for solving industrial problems. Num Pages: 316 pages, biography. BIC Classification: TDCQ. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 20. Weight in Grams: 653. . 1996. 2nd ed. 1996. Hardback. . . . . Books ship from the US and Ireland.

Hardcover. Zustand: Like New. Like New. book.

Zustand: new. Questo è un articolo print on demand.

Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject, including the ceramic processes, organic chemical structures, polymers, colloid science and others, starting from fundamental principles, with many literature references for further reading. After the fundamentals, detailed case studies from industrial applications are described for the optimization of solvents, dispersants, binders, plasticizers, lubricants and some minor additives. A wide range of information is covered, beginning with fundamental equations for students, and extending to advanced applications for development workers and factory problem solvers. Shanefield undertook this ambitious task only because of the previous lack of resources that address the growing need for detailed information on organic additives for ceramics. Suitable for use as a textbook and as a reference source for working ceramists and chemists who wish to supply the ceramics industry with additives. 328 pp. Englisch.

Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject, incl.

Paperback / softback. Zustand: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.

Zustand: New. Print on Demand pp. 328 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.

Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject, including the ceramic processes, organic chemical structures, polymers, colloid science and others, starting from fundamental principles, with many literature references for further reading. After the fundamentals, detailed case studies from industrial applications are described for the optimization of solvents, dispersants, binders, plasticizers, lubricants and some minor additives. A wide range of information is covered, beginning with fundamental equations for students, and extending to advanced applications for development workers and factory problem solvers. Shanefield undertook this ambitious task only because of the previous lack of resources that address the growing need for detailed information on organic additives for ceramics.Suitable for use as a textbook and as a reference source for working ceramists and chemists who wish to supply the ceramics industry with additives.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 328 pp. Englisch.

Zustand: New. PRINT ON DEMAND pp. 328.

Buch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This volume is intended to be used as a textbook for teaching pur poses and also as a reference source for working engineers. Therefore, a wide range of subject matter must be covered, starting with funda mental explanations for students, and extending to advanced applica tions for development workers and factory problem-solvers. Such an ambitious task is being attempted only because of the present lack of resources which might otherwise fill the need. The author planned the book for use as the primary text in an un dergraduate course in processing, which he teaches at Rutgers University. However, the book could also be used as a supplementary text for more general courses in related subjects. Powder metallurgy, printing inks, and paints involve many of the same organic additives as ceramic processing. These specialized fields of technology are usually covered somewhat by very general college courses in metallurgy, materials science, and chemical engineering, but there appears to be a need for more specific training in the area of the organic additives used in those fields. The formulators, for lack of confidence and better understanding, often rely on simple waxes or acrylates, when a higher level of technological knowledge could provide improved results. It is intended that this book will be useful as a supplementary source of information for those fields also, both as a self-teaching tool and for college coursework. 340 pp. Englisch.

Buch. Zustand: Neu. Organic Additives and Ceramic Processing, Second Edition | With Applications in Powder Metallurgy, Ink, and Paint | Daniel J. Shanefield | Buch | xiv | Englisch | 1996 | Springer US | EAN 9780792397656 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.

Buch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This volume is intended to be used as a textbook for teaching pur poses and also as a reference source for working engineers. Therefore, a wide range of subject matter must be covered, starting with funda mental explanations for students, and extending to advanced applica tions for development workers and factory problem-solvers. Such an ambitious task is being attempted only because of the present lack of resources which might otherwise fill the need. The author planned the book for use as the primary text in an un dergraduate course in processing, which he teaches at Rutgers University. However, the book could also be used as a supplementary text for more general courses in related subjects. Powder metallurgy, printing inks, and paints involve many of the same organic additives as ceramic processing. These specialized fields of technology are usually covered somewhat by very general college courses in metallurgy, materials science, and chemical engineering, but there appears to be a need for more specific training in the area of the organic additives used in those fields. The formulators, for lack of confidence and better understanding, often rely on simple waxes or acrylates, when a higher level of technological knowledge could provide improved results. It is intended that this book will be useful as a supplementary source of information for those fields also, both as a self-teaching tool and for college coursework.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 340 pp. Englisch.

Zustand: New. Print on Demand pp. 340 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.

Zustand: New. PRINT ON DEMAND pp. 340.