Rapid modelling increasing competitiveness (18 Ergebnisse)
- Hardcover
Anbieter: Phatpocket Limited, Waltham Abbey, HERTS, Vereinigtes KönigreichPhatpocket Limited
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Wie neu
EUR 63,02
EUR 12,41 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 1 verfügbar
Zustand: Like New. Used - Like New. Book is new and unread but may have minor shelf wear. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.
- Hardcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 227,10
EUR 13,97 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Softcover
Anbieter: Books Puddle, New York, NY, USABooks Puddle
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 278,40
EUR 3,46 VersandVersand innerhalb von USAAnzahl: 4 verfügbar
Zustand: New. pp. 332.
- Hardcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 217,46
EUR 63,32 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - A Perspective on Two Decades of Rapid Modeling It is an honor for me to be asked to write a foreword to the Proceedings of the 1st Rapid Modeling Conference. In 1987, when I coined the term 'Rapid Modeling' to denote queuing modeling of manufacturing system…s, I never imagined that two decades later there would be an international conference devoted to this topic! I am delighted to see that there will be around 40 presentations at the conference by leading researchers from aroundthe world, and about half of these presentationsare represented by written papers published in this book. I congratulate the conference organizers and program committee on the success of their efforts to hold the rst ever conference on Rapid Modeling. Attendees at this conferencemight nd it interesting to learn about the history of the term Rapid Modeling in the context it is used here. During the fall of 1986 I was invited to a meeting at the Headquarters of the Society of Manufacturing Engineers (SME) in Dearborn, Michigan. By that time I had successfully demonstrated s- eral industry applications of queuing network models at leading manufacturers in the USA. Although in principle the use of queuing networks to model manufact- ing systems was well known in the OR/MS community and many papers had been published,the actual use of suchmodelsby manufacturingprofessionalswas almost nonexistent.
- Softcover
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 223,11
EUR 62,53 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - A Perspective on Two Decades of Rapid Modeling It is an honor for me to be asked to write a foreword to the Proceedings of the 1st Rapid Modeling Conference. In 1987, when I coined the term 'Rapid Modeling' to denote queuing modeling of manufacturing… systems, I never imagined that two decades later there would be an international conference devoted to this topic! I am delighted to see that there will be around 40 presentations at the conference by leading researchers from aroundthe world, and about half of these presentationsare represented by written papers published in this book. I congratulate the conference organizers and program committee on the success of their efforts to hold the rst ever conference on Rapid Modeling. Attendees at this conferencemight nd it interesting to learn about the history of the term Rapid Modeling in the context it is used here. During the fall of 1986 I was invited to a meeting at the Headquarters of the Society of Manufacturing Engineers (SME) in Dearborn, Michigan. By that time I had successfully demonstrated s- eral industry applications of queuing network models at leading manufacturers in the USA. Although in principle the use of queuing networks to model manufact- ing systems was well known in the OR/MS community and many papers had been published,the actual use of suchmodelsby manufacturingprofessionalswas almost nonexistent.
- Hardcover
Anbieter: Revaluation Books, Exeter, Vereinigtes KönigreichRevaluation Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 305,35
EUR 14,58 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 2 verfügbar
Hardcover. Zustand: Brand New. 1st edition. 309 pages. 9.25x6.25x0.75 inches. In Stock.
- Softcover
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes KönigreichRia Christie Collections
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 313,21
EUR 13,97 VersandVersand von Vereinigtes Königreich nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. In.
- Softcover
- Print-on-Demand
Anbieter: Basi6 International, Irving, TX, USABasi6 International
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 175,84
Versand gratisVersand innerhalb von USAAnzahl: 10 verfügbar
Zustand: Brand New. New. US edition. Print on demand title. Delivery takes 20-25 days. Excellent Customer Service.
- Hardcover
- Print-on-Demand
Anbieter: Basi6 International, Irving, TX, USABasi6 International
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 175,84
Versand gratisVersand innerhalb von USAAnzahl: 10 verfügbar
Zustand: Brand New. New. US edition. Print on demand title. Delivery takes 20-25 days. Excellent Customer Service.
- Softcover
- Print-on-Demand
Anbieter: moluna, Greven, Deutschlandmoluna
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 180,07
EUR 48,99 VersandVersand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Provides an overview of the state of the art in rapid modeling for integrated demand and supply managementGerald Reiner studied Business Administration in Vienna after an education in Industrial Engineering. In 2001 he…received his Doctorate i.
- Hardcover
- Print-on-Demand
Anbieter: moluna, Greven, Deutschlandmoluna
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 180,07
EUR 48,99 VersandVersand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Provides an overview of the state of the art in rapid modeling for integrated demand and supply managementGerald Reiner studied Business Administration in Vienna after an education in Industrial Engineering. In 2001 he…received his Doctorate i.
- Softcover
- Print-on-Demand
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, DeutschlandBuchWeltWeit Ludwig Meier e.K.
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 213,99
EUR 23,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -A Perspective on Two Decades of Rapid Modeling It is an honor for me to be asked to write a foreword to the Proceedings of the 1st Rapid Modeling Conference. In 1987, when I coined the term 'Rapid Modeling' to denote queuing modeling…of manufacturing systems, I never imagined that two decades later there would be an international conference devoted to this topic! I am delighted to see that there will be around 40 presentations at the conference by leading researchers from aroundthe world, and about half of these presentationsare represented by written papers published in this book. I congratulate the conference organizers and program committee on the success of their efforts to hold the rst ever conference on Rapid Modeling. Attendees at this conferencemight nd it interesting to learn about the history of the term Rapid Modeling in the context it is used here. During the fall of 1986 I was invited to a meeting at the Headquarters of the Society of Manufacturing Engineers (SME) in Dearborn, Michigan. By that time I had successfully demonstrated s- eral industry applications of queuing network models at leading manufacturers in the USA. Although in principle the use of queuing networks to model manufact- ing systems was well known in the OR/MS community and many papers had been published,the actual use of suchmodelsby manufacturingprofessionalswas almost nonexistent. 332 pp. Englisch.
- Hardcover
- Print-on-Demand
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, DeutschlandBuchWeltWeit Ludwig Meier e.K.
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 213,99
EUR 23,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Buch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -A Perspective on Two Decades of Rapid Modeling It is an honor for me to be asked to write a foreword to the Proceedings of the 1st Rapid Modeling Conference. In 1987, when I coined the term 'Rapid Modeling' to denote queuing modeling of manu…facturing systems, I never imagined that two decades later there would be an international conference devoted to this topic! I am delighted to see that there will be around 40 presentations at the conference by leading researchers from aroundthe world, and about half of these presentationsare represented by written papers published in this book. I congratulate the conference organizers and program committee on the success of their efforts to hold the rst ever conference on Rapid Modeling. Attendees at this conferencemight nd it interesting to learn about the history of the term Rapid Modeling in the context it is used here. During the fall of 1986 I was invited to a meeting at the Headquarters of the Society of Manufacturing Engineers (SME) in Dearborn, Michigan. By that time I had successfully demonstrated s- eral industry applications of queuing network models at leading manufacturers in the USA. Although in principle the use of queuing networks to model manufact- ing systems was well known in the OR/MS community and many papers had been published,the actual use of suchmodelsby manufacturingprofessionalswas almost nonexistent. 332 pp. Englisch.
Weitere Bilder- Hardcover
- Print-on-Demand
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 186,70
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Buch. Zustand: Neu. Rapid Modelling for Increasing Competitiveness | Tools and Mindset | Gerald Reiner | Buch | xxii | Englisch | 2009 | Springer | EAN 9781848827479 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on… Demand.
- Hardcover
- Print-on-Demand
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschlandbuchversandmimpf2000
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 213,99
EUR 60,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Buch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -A Perspective on Two Decades of Rapid Modeling It is an honor for me to be asked to write a foreword to the Proceedings of the 1st Rapid Modeling Conference. In 1987, when I coined the term ¿Rapid Modeling¿ to denote queuing modeling of manufact…uring systems, I never imagined that two decades later there would be an international conference devoted to this topic! I am delighted to see that there will be around 40 presentations at the conference by leading researchers from aroundthe world, and about half of these presentationsare represented by written papers published in this book. I congratulate the conference organizers and program committee on the success of their efforts to hold the rst ever conference on Rapid Modeling. Attendees at this conferencemight nd it interesting to learn about the history of the term Rapid Modeling in the context it is used here. During the fall of 1986 I was invited to a meeting at the Headquarters of the Society of Manufacturing Engineers (SME) in Dearborn, Michigan. By that time I had successfully demonstrated s- eral industry applications of queuing network models at leading manufacturers in the USA. Although in principle the use of queuing networks to model manufact- ing systems was well known in the OR/MS community and many papers had been published,the actual use of suchmodelsby manufacturingprofessionalswas almost nonexistent.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 332 pp. Englisch.
- Softcover
- Print-on-Demand
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschlandbuchversandmimpf2000
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 213,99
EUR 60,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -A Perspective on Two Decades of Rapid Modeling It is an honor for me to be asked to write a foreword to the Proceedings of the 1st Rapid Modeling Conference. In 1987, when I coined the term ¿Rapid Modeling¿ to denote queuing modeling of m…anufacturing systems, I never imagined that two decades later there would be an international conference devoted to this topic! I am delighted to see that there will be around 40 presentations at the conference by leading researchers from aroundthe world, and about half of these presentationsare represented by written papers published in this book. I congratulate the conference organizers and program committee on the success of their efforts to hold the rst ever conference on Rapid Modeling. Attendees at this conferencemight nd it interesting to learn about the history of the term Rapid Modeling in the context it is used here. During the fall of 1986 I was invited to a meeting at the Headquarters of the Society of Manufacturing Engineers (SME) in Dearborn, Michigan. By that time I had successfully demonstrated s- eral industry applications of queuing network models at leading manufacturers in the USA. Although in principle the use of queuing networks to model manufact- ing systems was well known in the OR/MS community and many papers had been published,the actual use of suchmodelsby manufacturingprofessionalswas almost nonexistent.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 332 pp. Englisch.
- Softcover
- Print-on-Demand
Anbieter: Majestic Books, Hounslow, Vereinigtes KönigreichMajestic Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 293,63
EUR 7,58 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
Zustand: New. Print on Demand pp. 332 60 Illus.
- Softcover
- Print-on-Demand
Anbieter: Biblios, frankfurt am main, HESSE, DeutschlandBiblios
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 299,70
EUR 9,95 VersandVersand von Deutschland nach USAAnzahl: 4 verfügbar
Zustand: New. PRINT ON DEMAND pp. 332.
