servitization industry (52 Ergebnisse)

Hardcover. Zustand: Very Good. Servitization in Industry This book is in very good condition and will be shipped within 24 hours of ordering. The cover may have some limited signs of wear but the pages are clean, intact and the spine remains undamaged. This book has clearly been well maintained and looked after thus far. Money back guarantee if you are not satisfied. See all our books here, order more than 1 book and get discounted shipping. .

Hardcover. Zustand: Very Good. Shipped within 24 hours from our UK warehouse. Clean, undamaged book with no damage to pages and minimal wear to the cover. Spine still tight, in very good condition. Remember if you are not happy, you are covered by our 100% money back guarantee.

Zustand: New.

Zustand: As New. Unread book in perfect condition.

Zustand: new. New!

Zustand: New.

Hardback. Zustand: New. New copy - Usually dispatched within 4 working days.

Zustand: fine. l'article peut presenter de tres legers signes d'usure, petites rayures ou imperfections esthetiques. vendeur professionnel; envoi soigne en 24/48h.

Zustand: As New. Unread book in perfect condition.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 368 | Sprache: Englisch | Produktart: Bücher | This book summarizes the ¿interim result¿ of the servitization activities in manufacturing industries. While the early literature on servitization tended to stress only its advantages, more recently, scholars have also started to refer to the challenges associated with servitization. This book attempts to give a balanced picture of servitization. The book is structured in four parts: Part I introduces the topic by presenting the most recent academic discussion about servitization and uses an empirical analysis to show the degree of servitization across Europe. The results of this analysis are then compared to the discussion in the literature. This comparison highlights the existing discrepancies between the rather euphoric literature and the more skeptical practical experience. The second and third parts attempt to explain these discrepancies by taking as a starting point the assumption that servitization recommendations have to consider the heterogeneity of the manufacturing sector and the capabilities of the provider. Part II presents articles which analyze the specific characteristics of different sectors with their barriers and potentials and presents frameworks for a successful servitization of the core sectors in European manufacturing industries which include, e.g. aeronautics, automotive, ICT, chemical industries, pulp and paper industries and different engineering sectors. Part III focuses on companies¿ capabilities which are necessary for successful servitization. These include strategic management, marketing, organization, innovation, engineering, human resources, controlling, quality and networks. All the contributions in parts II and III add up to a detailed picture of servitization for sectors and functions and indicate the practical implications for enterprises in manufacturing industries. The fourth part concludes the book with a chapter summarizing the findings and giving an outlook of servitization in manufacturing industries, itschallenges and future developments.

Gebundene Ausgabe. Zustand: Sehr gut. Gebraucht - Sehr gut SG - leichte Beschädigungen oder Verschmutzungen, ungelesenes Mängelexemplar, gestempelt - An economic analysis of de-industrialization that considers the ongoing transformation of the industrial economies and the consequences for economic policy.

Hardcover. Zustand: Brand New. 364 pages. 8.75x5.75x1.00 inches. In Stock.

Zustand: New. In.

Buch. Zustand: Neu. Neuware -This book summarizes the 'interim result' of the servitization activities in manufacturing industries. While the early literature on servitization tended to stress only its advantages, more recently, scholars have also started to refer to the challenges associated with servitization. This book attempts to give a balanced picture of servitization. The book is structured in four parts: Part I introduces the topic by presenting the most recent academic discussion about servitization and uses an empirical analysis to show the degree of servitization across Europe. The results of this analysis are then compared to the discussion in the literature. This comparison highlights the existing discrepancies between the rather euphoric literature and the more skeptical practical experience. The second and third parts attempt to explain these discrepancies by taking as a starting point the assumption that servitization recommendations have to consider the heterogeneity of the manufacturing sector and the capabilities of the provider. Part II presents articles which analyze the specific characteristics of different sectors with their barriers and potentials and presents frameworks for a successful servitization of the core sectors in European manufacturing industries which include, e.g. aeronautics, automotive, ICT, chemical industries, pulp and paper industries and different engineering sectors. Part III focuses on companies' capabilities which are necessary for successful servitization. These include strategic management, marketing, organization, innovation, engineering, human resources, controlling, quality and networks. All the contributions in parts II and III add up to a detailed picture of servitization for sectors and functions and indicate the practical implications for enterprises in manufacturing industries. The fourth part concludes the book with a chapter summarizing the findings and giving an outlook of servitization in manufacturing industries, its challenges and future developments. 368 pp. Englisch.

Gebunden. Zustand: New.

Zustand: New.

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 368 | Sprache: Englisch | Produktart: Bücher | This book summarizes the ¿interim result¿ of the servitization activities in manufacturing industries. While the early literature on servitization tended to stress only its advantages, more recently, scholars have also started to refer to the challenges associated with servitization. This book attempts to give a balanced picture of servitization. The book is structured in four parts: Part I introduces the topic by presenting the most recent academic discussion about servitization and uses an empirical analysis to show the degree of servitization across Europe. The results of this analysis are then compared to the discussion in the literature. This comparison highlights the existing discrepancies between the rather euphoric literature and the more skeptical practical experience. The second and third parts attempt to explain these discrepancies by taking as a starting point the assumption that servitization recommendations have to consider the heterogeneity of the manufacturing sector and the capabilities of the provider. Part II presents articles which analyze the specific characteristics of different sectors with their barriers and potentials and presents frameworks for a successful servitization of the core sectors in European manufacturing industries which include, e.g. aeronautics, automotive, ICT, chemical industries, pulp and paper industries and different engineering sectors. Part III focuses on companies¿ capabilities which are necessary for successful servitization. These include strategic management, marketing, organization, innovation, engineering, human resources, controlling, quality and networks. All the contributions in parts II and III add up to a detailed picture of servitization for sectors and functions and indicate the practical implications for enterprises in manufacturing industries. The fourth part concludes the book with a chapter summarizing the findings and giving an outlook of servitization in manufacturing industries, itschallenges and future developments.

Zustand: New. 2023. Hardcover. . . . . .

Zustand: New. pp. 364 Softcover reprint of the original 1st ed. 2014 edition NO-PA16APR2015-KAP.

Taschenbuch. Zustand: Neu. Servitization in Industry | Gunter Lay | Taschenbuch | xv | Englisch | 2016 | Springer Nature Switzerland | EAN 9783319375083 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.

Zustand: New. pp. 368.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book summarizes the 'interim result' of the servitization activities in manufacturing industries. While the early literature on servitization tended to stress only its advantages, more recently, scholars have also started to refer to the challenges associated with servitization. This book attempts to give a balanced picture of servitization. The book is structured in four parts: Part I introduces the topic by presenting the most recent academic discussion about servitization and uses an empirical analysis to show the degree of servitization across Europe. The results of this analysis are then compared to the discussion in the literature. This comparison highlights the existing discrepancies between the rather euphoric literature and the more skeptical practical experience. The second and third parts attempt to explain these discrepancies by taking as a starting point the assumption that servitization recommendations have to consider the heterogeneity of the manufacturing sector and the capabilities of the provider. Part II presents articles which analyze the specific characteristics of different sectors with their barriers and potentials and presents frameworks for a successful servitization of the core sectors in European manufacturing industries which include, e.g. aeronautics, automotive, ICT, chemical industries, pulp and paper industries and different engineering sectors. Part III focuses on companies' capabilities which are necessary for successful servitization. These include strategic management, marketing, organization, innovation, engineering, human resources, controlling, quality and networks. All the contributions in parts II and III add up to a detailed picture of servitization for sectors and functions and indicate the practical implications for enterprises in manufacturing industries. The fourth part concludes the book with a chapter summarizing the findings and giving an outlook of servitization in manufacturing industries, its challenges and future developments.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book summarizes the 'interim result' of the servitization activities in manufacturing industries. While the early literature on servitization tended to stress only its advantages, more recently, scholars have also started to refer to the challenges associated with servitization. This book attempts to give a balanced picture of servitization. The book is structured in four parts: Part I introduces the topic by presenting the most recent academic discussion about servitization and uses an empirical analysis to show the degree of servitization across Europe. The results of this analysis are then compared to the discussion in the literature. This comparison highlights the existing discrepancies between the rather euphoric literature and the more skeptical practical experience. The second and third parts attempt to explain these discrepancies by taking as a starting point the assumption that servitization recommendations have to consider the heterogeneity of the manufacturing sector and the capabilities of the provider. Part II presents articles which analyze the specific characteristics of different sectors with their barriers and potentials and presents frameworks for a successful servitization of the core sectors in European manufacturing industries which include, e.g. aeronautics, automotive, ICT, chemical industries, pulp and paper industries and different engineering sectors. Part III focuses on companies' capabilities which are necessary for successful servitization. These include strategic management, marketing, organization, innovation, engineering, human resources, controlling, quality and networks. All the contributions in parts II and III add up to a detailed picture of servitization for sectors and functions and indicate the practical implications for enterprises in manufacturing industries. The fourth part concludes the book with a chapter summarizing the findings and giving an outlook of servitization in manufacturing industries, itschallenges and future developments.

Zustand: New.

Zustand: New. 2023. Hardcover. . . . . . Books ship from the US and Ireland.

Zustand: New.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This edited collection offers deeper understanding of the green and digital transition in the automotive industry.It explains how mobility products, services and business models are changing, the opportunities and threats correlated to this double transition as well as the competences and resources needed for firms in this fluid scenario.The book firstly provides an in-depth overview of the strategic and managerial implications for automotive and mobility incumbent firms. Chapters describe how sustainable technologies have been changing over time and identify the challenges of the shift imposed by the new competitive environment, such as the so-called servitization of the industry. The second section describes the new drivers of growth and profitability, such as open and collaborative innovation, and provides guidance on how incumbents can surf this turbulent landscape.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This edited collection offers deeper understanding of the green and digital transition in the automotive industry.It explains how mobility products, services and business models are changing, the opportunities and threats correlated to this double transition as well as the competences and resources needed for firms in this fluid scenario.The book firstly provides an in-depth overview of the strategic and managerial implications for automotive and mobility incumbent firms. Chapters describe how sustainable technologies have been changing over time and identify the challenges of the shift imposed by the new competitive environment, such as the so-called servitization of the industry. The second section describes the new drivers of growth and profitability, such as open and collaborative innovation, and provides guidance on how incumbents can surf this turbulent landscape.

Hardcover. Zustand: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Hardcover. Zustand: Brand New. 261 pages. 8.27x5.83x8.27 inches. In Stock.