Verlag: Applied Science Publishers, 1975
ISBN 10: 0853346003 ISBN 13: 9780853346005
Sprache: Englisch
Anbieter: NEPO UG, Rüsselsheim am Main, Deutschland
Gebundene Ausgabe. Zustand: Gut. 500 Seiten ex Library Book aus einer wissenschaftlichen Bibliothek Sprache: Englisch Gewicht in Gramm: 550.
Anbieter: Lucky's Textbooks, Dallas, TX, USA
EUR 53,35
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 57,45
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Anbieter: Chiron Media, Wallingford, Vereinigtes Königreich
EUR 55,89
Anzahl: 10 verfügbar
In den WarenkorbPaperback. Zustand: New.
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
EUR 80,46
Anzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. reprint edition. 520 pages. 8.00x5.01x1.05 inches. In Stock.
Verlag: Springer Netherlands, Springer Netherlands Mär 2014, 2014
ISBN 10: 9401098050 ISBN 13: 9789401098052
Sprache: Englisch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Taschenbuch. Zustand: Neu. Neuware -It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give the reader an up to date viewofthe present position. The individual chapters are for the most part self contained, and cover a very wide range of topics. It is intended that each of them should serve the dual purpose of an expository introduction to the subject and a topical review of recent research. It is inevitable that there will be differences of style and approach in the contributions from the different authors. No atternpt has been made to moderate these differences, as they serve to illustrate the diversity of approaches required to give the reader a balanced view of the subject. I should like to thank the contributors for their endeavours, and especially for their patience in accepting modifications and corrections which make for consistency in the book as a whole. 1 am particularly indebted to Professor Leslie Holliday who originally approached me with the proposition that such a book would be a worthwhile venture and to the publishers who have given me every assistance in making its progress as painless as possible.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 520 pp. Englisch.
Taschenbuch. Zustand: Neu. Structure and Properties of Oriented Polymers | I. Ward | Taschenbuch | xv | Englisch | 2014 | Springer | EAN 9789401098052 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Verlag: Springer Netherlands, Springer Netherlands, 2014
ISBN 10: 9401098050 ISBN 13: 9789401098052
Sprache: Englisch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give the reader an up to date viewofthe present position. The individual chapters are for the most part self contained, and cover a very wide range of topics. It is intended that each of them should serve the dual purpose of an expository introduction to the subject and a topical review of recent research. It is inevitable that there will be differences of style and approach in the contributions from the different authors. No atternpt has been made to moderate these differences, as they serve to illustrate the diversity of approaches required to give the reader a balanced view of the subject. I should like to thank the contributors for their endeavours, and especially for their patience in accepting modifications and corrections which make for consistency in the book as a whole. 1 am particularly indebted to Professor Leslie Holliday who originally approached me with the proposition that such a book would be a worthwhile venture and to the publishers who have given me every assistance in making its progress as painless as possible.
EUR 250,30
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 297,18
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 297,18
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher.
Zustand: New. pp. 552 2nd Edition.
EUR 294,19
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
Verlag: Springer Netherlands, Springer Netherlands Okt 1997, 1997
ISBN 10: 0412608804 ISBN 13: 9780412608803
Sprache: Englisch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Erstausgabe
Buch. Zustand: Neu. Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 552 pp. Englisch.
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
EUR 379,64
Anzahl: 1 verfügbar
In den WarenkorbZustand: New. pp. 552 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.
Anbieter: Kennys Bookshop and Art Galleries Ltd., Galway, GY, Irland
Zustand: New. The understanding of the structure and properties of polymers in the oriented state is important in the field of polymer science and technology. This work discusses the various scientific advances that have been made in this area. It focuses on the methodologies available for characterizing oriented polymers and their mechanical behaviour. Editor(s): Ward, I. M. Num Pages: 536 pages, biography. BIC Classification: PNNP; TDCP. Category: (P) Professional & Vocational; (XV) Technical / Manuals. Dimension: 234 x 156 x 30. Weight in Grams: 945. . 1997. 2nd ed. 1997. Hardback. . . . .
Taschenbuch. Zustand: Neu. Structure and Properties of Oriented Polymers | Ian M. Ward | Taschenbuch | xi | Englisch | 2012 | Springer | EAN 9789401064699 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Verlag: Springer Netherlands, Springer Netherlands, 1997
ISBN 10: 0412608804 ISBN 13: 9780412608803
Sprache: Englisch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.
Anbieter: Biblios, Frankfurt am main, HESSE, Deutschland
Zustand: New. pp. 552.
Verlag: Springer Netherlands, Springer Netherlands, 2012
ISBN 10: 9401064695 ISBN 13: 9789401064699
Sprache: Englisch
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.
Anbieter: Mispah books, Redhill, SURRE, Vereinigtes Königreich
EUR 402,28
Anzahl: 1 verfügbar
In den WarenkorbHardcover. Zustand: Like New. Like New. Ships from Multiple Locations. book.
Zustand: New. The understanding of the structure and properties of polymers in the oriented state is important in the field of polymer science and technology. This work discusses the various scientific advances that have been made in this area. It focuses on the methodologies available for characterizing oriented polymers and their mechanical behaviour. Editor(s): Ward, I. M. Num Pages: 536 pages, biography. BIC Classification: PNNP; TDCP. Category: (P) Professional & Vocational; (XV) Technical / Manuals. Dimension: 234 x 156 x 30. Weight in Grams: 945. . 1997. 2nd ed. 1997. Hardback. . . . . Books ship from the US and Ireland.
hardcover. Zustand: New. In shrink wrap. Looks like an interesting title!
Verlag: Springer Netherlands Mär 2014, 2014
ISBN 10: 9401098050 ISBN 13: 9789401098052
Sprache: Englisch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give the reader an up to date viewofthe present position. The individual chapters are for the most part self contained, and cover a very wide range of topics. It is intended that each of them should serve the dual purpose of an expository introduction to the subject and a topical review of recent research. It is inevitable that there will be differences of style and approach in the contributions from the different authors. No atternpt has been made to moderate these differences, as they serve to illustrate the diversity of approaches required to give the reader a balanced view of the subject. I should like to thank the contributors for their endeavours, and especially for their patience in accepting modifications and corrections which make for consistency in the book as a whole. 1 am particularly indebted to Professor Leslie Holliday who originally approached me with the proposition that such a book would be a worthwhile venture and to the publishers who have given me every assistance in making its progress as painless as possible. 520 pp. Englisch.
Anbieter: moluna, Greven, Deutschland
EUR 48,37
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. It has become increasingly evident that there is much to begained from a detailed understanding of the structure and properties of polymers in the oriented state. This book reftects the growth of interest in this area of polymer scienceand attempts to give .
Verlag: Springer Netherlands Nov 2012, 2012
ISBN 10: 9401064695 ISBN 13: 9789401064699
Sprache: Englisch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas. 552 pp. Englisch.
Verlag: Springer Netherlands Okt 1997, 1997
ISBN 10: 0412608804 ISBN 13: 9780412608803
Sprache: Englisch
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Buch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas. 552 pp. Englisch.
Anbieter: preigu, Osnabrück, Deutschland
Buch. Zustand: Neu. Structure and Properties of Oriented Polymers | Ian M. Ward | Buch | xi | Englisch | 1997 | Springer | EAN 9780412608803 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu Print on Demand.
Verlag: Springer Netherlands, Springer Netherlands Nov 2012, 2012
ISBN 10: 9401064695 ISBN 13: 9789401064699
Sprache: Englisch
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The first edition was produced at a time when the advantages of studying oriented polymers were just becoming apparent. From a sci entific stand point it had been demonstrated that greater insight into both structure and properties could be obtained if an oriented polymer was prepared. From a technological viewpoint, major advances were under way, especially in high modulus and high strength fibres. Twenty years later, it is possible to review the scientific advances which have been made in this area and to provide much wider perspectives for the technology. As in the case of the first edition, the emphasis is on the methodologies available for characterizing oriented polymers and their mechanical behaviour. It is a particular pleasure to thank the contributing authors for their cooperation and Dr Philip Hastings of Chapman & Hall for his support and encouragement. I am also indebted to Professors A. H. Windle and D. C. Bassett for their respective contributions to sections 1. 3. 1 and 1. 3. 4. Although this chapter has been extensively revised, the contribution of the late Leslie Holliday to the first edition of this book is also acknowledged. Introduction 1 I. M. Ward 1. 1 THE PHENOMENON OF ORIENTATION Orientation in polymers is a phenomenon of great technical and theo retical importance. The word orientation itself conveys a number of ideas.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 552 pp. Englisch.