Zustand: Good. 892 pp., hardcover, ex library else text clean & binding tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.
Anbieter: Ria Christie Collections, Uxbridge, Vereinigtes Königreich
EUR 117,03
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. In.
Zustand: New. pp. 916.
Sprache: Englisch
Verlag: Springer Berlin Heidelberg, 2011
ISBN 10: 3642840051 ISBN 13: 9783642840050
Anbieter: AHA-BUCH GmbH, Einbeck, Deutschland
Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is 'bearable' First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks.
Anbieter: Revaluation Books, Exeter, Vereinigtes Königreich
EUR 164,93
Anzahl: 2 verfügbar
In den WarenkorbPaperback. Zustand: Brand New. 916 pages. 9.49x6.22x2.09 inches. In Stock.
Anbieter: Mispah books, Redhill, SURRE, Vereinigtes Königreich
EUR 166,69
Anzahl: 1 verfügbar
In den WarenkorbPaperback. Zustand: Like New. Like New. book.
Sprache: Englisch
Verlag: Springer-Verlag GmbH & Co. KG, 1989
ISBN 10: 3540518568 ISBN 13: 9783540518563
Anbieter: Buchpark, Trebbin, Deutschland
Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 910 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes Königreich
EUR 367,50
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
Anbieter: GreatBookPrices, Columbia, MD, USA
EUR 382,50
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New.
Anbieter: GreatBookPrices, Columbia, MD, USA
EUR 389,92
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: As New. Unread book in perfect condition.
Anbieter: GreatBookPricesUK, Woodford Green, Vereinigtes Königreich
EUR 396,19
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: As New. Unread book in perfect condition.
Anbieter: Brook Bookstore On Demand, Napoli, NA, Italien
EUR 86,24
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: new. Questo è un articolo print on demand.
Sprache: Englisch
Verlag: Springer Berlin Heidelberg, Springer Berlin Heidelberg Dez 2011, 2011
ISBN 10: 3642840051 ISBN 13: 9783642840050
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Deutschland
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is 'bearable' First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks. 916 pp. Englisch.
Sprache: Englisch
Verlag: Springer Berlin Heidelberg, 2011
ISBN 10: 3642840051 ISBN 13: 9783642840050
Anbieter: moluna, Greven, Deutschland
EUR 92,27
Anzahl: Mehr als 20 verfügbar
In den WarenkorbZustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Organized by Deutsche Gesellschaft fuer zerstoerungsfreie Pruefung e.V. (DGZfP), Berlin and Fraunhofer-Institut fuer zerstoerungsfreie Pruefverfahren (IzfP), SaarbrueckenEngineering structures for reliable function and safety have to be designed such that oper.
Anbieter: Majestic Books, Hounslow, Vereinigtes Königreich
EUR 164,61
Anzahl: 4 verfügbar
In den WarenkorbZustand: New. Print on Demand pp. 916 609 Figures, 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.
Sprache: Englisch
Verlag: Springer Berlin Heidelberg, Springer Spektrum Dez 2011, 2011
ISBN 10: 3642840051 ISBN 13: 9783642840050
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschland
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Engineering structures for reliable function and safety have to be designed such that operational mechanical loads are compensated for by stresses in the components bearable by the materials used. Vhat is 'bearable' First of all it depends on the properties of the chosen materials as well as on several other parameters, e.g. temperature, corrosivity of the environment, elapsed or remaining serviceable life, unexpected deterioration of materials, whatever the source and nature of such deterioration may be: defects, loss of strength, embrittlement, wastage, etc. DEFECTS and PROPERTIES of materials currently determine loadability. Therefore in addition to nondestructive testing for defects there is also a need for nondestructive testing of properties. The third type of information to be supplied by nondestructive measurement pertains to STRESS STATES under OPERATIONAL LOADS, i.e. LOAD-INDUCED plus RESIDUAL STRESSES. Residual stresses normally cannot be calculated; they have to be measured nondestructively; well-approved elastomechanical finite element codes are available and used for calculating load-induced stresses; for redundancy and reliability, engineers, however, need procedures and instrumentation for experimental checks.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 916 pp. Englisch.
Anbieter: Biblios, Frankfurt am main, HESSE, Deutschland
Zustand: New. PRINT ON DEMAND pp. 916.