Hemanth joel (20 Ergebnisse)

Zustand: New.

Paperback. Zustand: New.

Zustand: New. In English.

Zustand: New.

Paperback. Zustand: Brand New. 60 pages. 8.66x5.91x0.14 inches. In Stock.

Taschenbuch. Zustand: Neu. Heat Transfer Through Embossed and Perforated Fins for Aero Engines | Significance of Heat Transfer during Solidification of Composite Materials - Heat through Embossed and Perforated Fins | Joel Hemanth | Taschenbuch | 60 S. | Englisch | 2018 | Scholars' Press | EAN 9786202316675 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Zustand: Neu. Material Science and Engineering | Microstructural Studies of Cast Iron | Joel Hemanth | Taschenbuch | 64 S. | Englisch | 2011 | LAP LAMBERT Academic Publishing | EAN 9783845433981 | Verantwortliche Person für die EU: OmniScriptum GmbH & Co. KG, Bahnhofstr. 28, 66111 Saarbrücken, info[at]akademikerverlag[dot]de | Anbieter: preigu.…

Paperback. Zustand: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

PAP. Zustand: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

PAP. Zustand: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000.

Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Fins are the extended surfaces through which heat transfer takes place to keep the base surface cool. Fins of various configurations are presently used ranging from automobile, aero engines to cooling of chip in a computer. Note that in a fin majority of the heat transfer to atmosphere is by convection and therefore in the present research importance is given to variation of temperature along the length of the fin which in turn gives rate of heat transfer. In the present research experiments a solid rectangular aluminium fin and the same rectangular fin with different embossing's and perforations were compared analytically, experimentally and its validity through finite element analysis (FEA) for its temperature distribution along the length. From the present research experiments it is observed that the mathematical, experimental and FEA for a solid rectangular fin without perforations are converging within +/- 1 oC and rectangular fin with embossing's perforations are converging within +/- 2 oC and hence the validity. 60 pp. Englisch.…

Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This review presents the results obtained and the deductions made from a series of microstructural studies to determine Eutectic Cell Count (ECC), Dendrite Arm Spacing (DAS), and Grain Size (GS) of hypoeutectic gray cast iron which was sand cast using metallic, non metallic, water cooled and sub- zero (Cryogenic) end chills. Analysis of the data on chilled cast iron show that the cooling rate has a marked effect on eutectic cell size, dendrite spacing and grain size. It is observed that, the number of eutectic cells as an index of graphite nucleation and the effect of these on structure and properties, since the eutectic cells are developed on the graphite nuclei during solidification. The review suggest that some of the graphite in the structure of cast iron form more readily as a result of the decomposition of carbides during and after solidification process rather than being an outcome of the direct growth of the graphite form the liquid. It was found that microstructure, DAS, ECC and GS are highly dependent on the location of the casting from where the test samples were taken (chill end) and also on the chilling rate. 64 pp. Englisch.…

Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Fins are the extended surfaces through which heat transfer takes place to keep the base surface cool. Fins of various configurations are presently used ranging from automobile, aero engines to cooling of chip in a computer. Note that in a fin majority of the heat transfer to atmosphere is by convection and therefore in the present research importance is given to variation of temperature along the length of the fin which in turn gives rate of heat transfer. In the present research experiments a solid rectangular aluminium fin and the same rectangular fin with different embossing's and perforations were compared analytically, experimentally and its validity through finite element analysis (FEA) for its temperature distribution along the length. From the present research experiments it is observed that the mathematical, experimental and FEA for a solid rectangular fin without perforations are converging within +/- 1 oC and rectangular fin with embossing's perforations are converging within +/- 2 oC and hence the validity.…

Zustand: New. Print on Demand.

Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This review presents the results obtained and the deductions made from a series of microstructural studies to determine Eutectic Cell Count (ECC), Dendrite Arm Spacing (DAS), and Grain Size (GS) of hypoeutectic gray cast iron which was sand cast using metallic, non metallic, water cooled and sub- zero (Cryogenic) end chills. Analysis of the data on chilled cast iron show that the cooling rate has a marked effect on eutectic cell size, dendrite spacing and grain size. It is observed that, the number of eutectic cells as an index of graphite nucleation and the effect of these on structure and properties, since the eutectic cells are developed on the graphite nuclei during solidification. The review suggest that some of the graphite in the structure of cast iron form more readily as a result of the decomposition of carbides during and after solidification process rather than being an outcome of the direct growth of the graphite form the liquid. It was found that microstructure, DAS, ECC and GS are highly dependent on the location of the casting from where the test samples were taken (chill end) and also on the chilling rate.…

Zustand: New. PRINT ON DEMAND.

Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Hemanth JoelProf. Dr. Joel Hemanth, Assoc. DEAN at the Presidency University has a Post Ph.D degree in Mechanical Engineering and D. Min. degree in Theology. He has published more than 300 research papers in repute International jo.…

Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Hemanth Dr. JoelBiography of the AuthorDr. Joel Hemanth currently works as the Dean, Professor & Head of Mechanical Engineering at Rajiv Gandhi Institute of Technology (R.G.I.T.), Bangalore, INDIA.He has completed his Ph.D, Post .…

Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Fins are the extended surfaces through which heat transfer takes place to keep the base surface cool. Fins of various configurations are presently used ranging from automobile, aero engines to cooling of chip in a computer. Note that in a fin majority of the heat transfer to atmosphere is by convection and therefore in the present research importance is given to variation of temperature along the length of the fin which in turn gives rate of heat transfer. In the present research experiments a solid rectangular aluminium fin and the same rectangular fin with different embossing's and perforations were compared analytically, experimentally and its validity through finite element analysis (FEA) for its temperature distribution along the length. From the present research experiments it is observed that the mathematical, experimental and FEA for a solid rectangular fin without perforations are converging within +/- 1 oC and rectangular fin with embossing's perforations are converging within +/- 2 oC and hence the validity.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 60 pp. Englisch.…

Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This review presents the results obtained and the deductions made from a series of microstructural studies to determine Eutectic Cell Count (ECC), Dendrite Arm Spacing (DAS), and Grain Size (GS) of hypoeutectic gray cast iron which was sand cast using metallic, non metallic, water cooled and sub- zero (Cryogenic) end chills. Analysis of the data on chilled cast iron show that the cooling rate has a marked effect on eutectic cell size, dendrite spacing and grain size. It is observed that, the number of eutectic cells as an index of graphite nucleation and the effect of these on structure and properties, since the eutectic cells are developed on the graphite nuclei during solidification. The review suggest that some of the graphite in the structure of cast iron form more readily as a result of the decomposition of carbides during and after solidification process rather than being an outcome of the direct growth of the graphite form the liquid. It was found that microstructure, DAS, ECC and GS are highly dependent on the location of the casting from where the test samples were taken (chill end) and also on the chilling rate.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 64 pp. Englisch.…