Hoffmanner a l (23 Ergebnisse)

Paperback. Zustand: new. Paperback. On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on "The Relation Between Theory and Practice it). Metal Forming" at the Sheraton-Cleveland Hotel during the Fall Meeting of AIME in Cleveland, Ohio. This conference was devoted to recent applications of theory to metal forming to establish a milestone in the current ability to predict phenomena during deformation processing and, thereby, demonstrate the utility of theory for process design. The papers were selected by first requesting presentations of relevant recent work from 68 recognized authorities in metal forming which resulted in 17 papers. A sub sequent call for papers resulted in the submission of 19 abstracts from which 4 papers were selected. The selection criteria required that the paper coupled theory with practice, and that the work was recent, unpublished and worthy of permanent record. The selection was performed by the Conference Chairman. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. e. , circa 1970, A, L. Hoffmanner Conference Chairman May, 1970 vii LIST OF CONTRIBUTORS Taylan Altan, Metalworking Division, Columbus Laboratories, Battelle Memorial Institute, Columbus, Ohio W. A. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.…

Zustand: New. 1st Edition, Reprint.

Zustand: As New. Unread book in perfect condition.

Paperback. Zustand: Brand New. 1971 edition. 503 pages. 9.61x6.14x1.18 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on 'The Relation Between Theory and Practice it). Metal Forming' at the Sheraton-Cleveland Hotel during the Fall Meeting of AIME in Cleveland, Ohio. This conference was devoted to recent applications of theory to metal forming to establish a milestone in the current ability to predict phenomena during deformation processing and, thereby, demonstrate the utility of theory for process design. The papers were selected by first requesting presentations of relevant recent work from 68 recognized authorities in metal forming which resulted in 17 papers. A sub sequent call for papers resulted in the submission of 19 abstracts from which 4 papers were selected. The selection criteria required that the paper coupled theory with practice, and that the work was recent, unpublished and worthy of permanent record. The selection was performed by the Conference Chairman. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. e. , circa 1970, A, L. Hoffmanner Conference Chairman May, 1970 vii LIST OF CONTRIBUTORS Taylan Altan, Metalworking Division, Columbus Laboratories, Battelle Memorial Institute, Columbus, Ohio W. A.…

Zustand: New. In English.

Zustand: New.

Zustand: As New. Unread book in perfect condition.

Zustand: New.

Hardback. Zustand: New.

Paperback. Zustand: new. Paperback. On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on "The Relation Between Theory and Practice it). Metal Forming" at the Sheraton-Cleveland Hotel during the Fall Meeting of AIME in Cleveland, Ohio. This conference was devoted to recent applications of theory to metal forming to establish a milestone in the current ability to predict phenomena during deformation processing and, thereby, demonstrate the utility of theory for process design. The papers were selected by first requesting presentations of relevant recent work from 68 recognized authorities in metal forming which resulted in 17 papers. A sub sequent call for papers resulted in the submission of 19 abstracts from which 4 papers were selected. The selection criteria required that the paper coupled theory with practice, and that the work was recent, unpublished and worthy of permanent record. The selection was performed by the Conference Chairman. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. e. , circa 1970, A, L. Hoffmanner Conference Chairman May, 1970 vii LIST OF CONTRIBUTORS Taylan Altan, Metalworking Division, Columbus Laboratories, Battelle Memorial Institute, Columbus, Ohio W. A. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.…

Paperback. Zustand: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Zustand: New.

Hardback. Zustand: New.

Buch. Zustand: Neu. Neuware - Extrusion.- Study of Flow Through Conical Converging Dies.- Selection of Operating Parameters to Prevent Central Bursting Defects During Cold Extrusion.- The Effect of Material Properties on Tension Zone and Boundary Shear-Stress in Extrusion.- Application of Visioplasticity Techniques to Axisymmetric Extrusions.- The Extrusion of Rate Sensitive Materials.- Deformation Criteria for Predicting the Cold-Extrusion Pressures of Metals.- Drawing and Sheet Metal Forming.- The Effect of Homogeneity on the Formability of 7000 Series Aluminum Alloys for Cartridge Cases.- Effect of Plastic Anisotropy on Drawing Characteristics of Aluminum Alloy Sheet.- Analyses of Deformation and Texture as Functions of Fabrication in Mandrel-Drawn Tubing.- Experimental Evaluation of Theoretically Ideal Drawing Dies.- The Application of the Avitzur Upper Bound Equation to Tungsten Wire Drawing and Its Use in Die-Line Design.- Forming Loads and Friction.- Computer Simulation to Predict Load, Stress, and Metal Flow in an Axisymmetric Closed-Die Forging.- The Validity of Simulating Tests in Evaluating Lubricants for Deformation Processes.- A New Method for the Determination of Material Flow Stress Values under Metalworking Conditions.- Force Requirements and Friction in Warm Working Operations.- Workability.- Theories and Experiments on Friction, Deformation, and Fracture in Plastic Deformation Processes.- The Use of Workability Test Results to Predict Processing Limits.- Hot Workability Testing Techniques.- Simulation of Extrusion Structures by Means of Torsion Testing for a High Strength Nickel-Base Alloy, Udimet 700.- Prediction and Effects of Material Damage During Deformation Processing.- The Relationship Between Superplasticity and Formability.…

LeatherBound. Zustand: New. BOOKS ARE EXEMPT FROM IMPORT DUTIES AND TARIFFS; NO EXTRA CHARGES APPLY. Leatherbound edition. Condition: New. Leather Binding on Spine and Corners with Golden leaf printing on spine. Bound in genuine leather with Satin ribbon page markers and Spine with raised gilt bands. Pages: 378. A perfect gift for your loved ones. Reprinted from 1969 edition. NO changes have been made to the original text. This is NOT a retyped or an ocr'd reprint. Illustrations, Index, if any, are included in black and white. Each page is checked manually before printing. As this print on demand book is reprinted from a very old book, there could be some missing or flawed pages, but we always try to make the book as complete as possible. Fold-outs, if any, are not part of the book. If the original book was published in multiple volumes then this reprint is of only one volume, not the whole set. IF YOU WISH TO ORDER PARTICULAR VOLUME OR ALL THE VOLUMES YOU CAN CONTACT US. Resized as per current standards. Sewing binding for longer life, where the book block is actually sewn (smythe sewn/section sewn) with thread before binding which results in a more durable type of binding. Language: English Pages: 378.…

Leather Bound. Zustand: New. Language: English. Language: English. Presenting an Exquisite Leather-Bound Edition, expertly crafted with Original Natural Leather that gracefully adorns the spine and corners. The allure continues with Golden Leaf Printing that adds a touch of elegance, while Hand Embossing on the rounded spine lends an artistic flair. This masterpiece has been meticulously reprinted in 2025, utilizing the invaluable guidance of the original edition published many years ago in 1969. The contents of this book are presented in classic black and white. Its durability is ensured through a meticulous sewing binding technique, enhancing its longevity. Imprinted on top-tier quality paper. A team of professionals has expertly processed each page, delicately preserving its content without alteration. Due to the vintage nature of these books, every page has been manually restored for legibility. However, in certain instances, occasional blurriness, missing segments, or faint black spots might persist. We sincerely hope for your understanding of the challenges we faced with these books. Recognizing their significance for readers seeking insight into our historical treasure, we've diligently restored and reissued them. Our intention is to offer this valuable resource once again. We eagerly await your feedback, hoping that you'll find it appealing and will generously share your thoughts and recommendations. Lang: - English, Pages:- 378, Print on Demand. If it is a multi-volume set, then it is only a single volume. We are specialised in Customisation of books, if you wish to opt different color leather binding, you may contact us. This service is chargeable. Product Disclaimer: Kindly be informed that, owing to the inherent nature of leather as a natural material, minor discolorations or textural variations may be perceptible. Explore the FOLIO EDITION (12x19 Inches): Available Upon Request. 378 378.…

Zustand: new. Questo è un articolo print on demand.

Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on 'The Relation Between Theory and Practice it). Metal Forming' at the Sheraton-Cleveland Hotel during the Fall Meeting of AIME in Cleveland, Ohio. This conference was devoted to recent applications of theory to metal forming to establish a milestone in the current ability to predict phenomena during deformation processing and, thereby, demonstrate the utility of theory for process design. The papers were selected by first requesting presentations of relevant recent work from 68 recognized authorities in metal forming which resulted in 17 papers. A sub sequent call for papers resulted in the submission of 19 abstracts from which 4 papers were selected. The selection criteria required that the paper coupled theory with practice, and that the work was recent, unpublished and worthy of permanent record. The selection was performed by the Conference Chairman. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. e. , circa 1970, A, L. Hoffmanner Conference Chairman May, 1970 vii LIST OF CONTRIBUTORS Taylan Altan, Metalworking Division, Columbus Laboratories, Battelle Memorial Institute, Columbus, Ohio W. A. 520 pp. Englisch.…

Zustand: New. Print on Demand.

Zustand: New. PRINT ON DEMAND.

Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on The Relation Between Theory and Practice it). Metal Forming at the Sheraton-Cleveland Hotel during the Fal.…

Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -On October 21 and 22, 1970, the Shaping and Forming Committee, Institute of Metals Division, The Metallurgical Society of AlME, held a Conference on 'The Relation Between Theory and Practice it). Metal Forming' at the Sheraton-Cleveland Hotel during the Fall Meeting of AIME in Cleveland, Ohio. This conference was devoted to recent applications of theory to metal forming to establish a milestone in the current ability to predict phenomena during deformation processing and, thereby, demonstrate the utility of theory for process design. The papers were selected by first requesting presentations of relevant recent work from 68 recognized authorities in metal forming which resulted in 17 papers. A sub sequent call for papers resulted in the submission of 19 abstracts from which 4 papers were selected. The selection criteria required that the paper coupled theory with practice, and that the work was recent, unpublished and worthy of permanent record. The selection was performed by the Conference Chairman. The papers in this volume have been organized in accordance with the following subjects: Extrusion Drawing and Sheet Metal Forming Forming Loads and Friction Workability These papers appear to assess the salient recent applications of mechanics to the deformation processing of alloys at the present time, i. e. , circa 1970, A, L. Hoffmanner Conference Chairman May, 1970 vii LIST OF CONTRIBUTORS Taylan Altan, Metalworking Division, Columbus Laboratories, Battelle Memorial Institute, Columbus, Ohio W. A.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 520 pp. Englisch.…