J j debarbadillo (6 Ergebnisse)
Sprache: Englisch
Verlag: Warrendale PA, TMS Minerals Metals and Materials Society., 1990
- Hardcover
Anbieter: Bucks County Bookshop IOBA, Doylestown, PA, USABucks County Bookshop IOBA
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenVerbandsmitglied: IOBA
Zustand: Gebraucht
EUR 31,51
EUR 5,20 VersandVersand innerhalb von USAAnzahl: 1 verfügbar
Contributors to a symposium on making metal alloys, discussing theoretical and empirical approaches. -- Hardcover. Condition: very good (owner name; no jacket). ISBN 0873391160.
- Hardcover
Anbieter: J. HOOD, BOOKSELLERS, ABAA/ILAB, Baldwin City, KS, USAJ. HOOD, BOOKSELLERS, ABAA/ILAB
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht
EUR 54,01
EUR 4,37 VersandVersand innerhalb von USAAnzahl: 1 verfügbar
Hardcover. Oversized. 292pp. Near new, clean, tight and bright condition without a dust jacket as published.
Verlag: American Society for Metals, Ohio, 1975
- Hardcover
- Erstausgabe
Anbieter: JARE Inc. dba Miles Books, Highland, IN, USAJARE Inc. dba Miles Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Gebraucht - Gut
EUR 36,01
EUR 5,20 VersandVersand innerhalb von USAAnzahl: 1 verfügbar
Hardcover. Zustand: Very Good. 1st Edition. Book is clean and tight. Previous owner's name is on the inside. Book.
Verlag: American Society For Metals, 1975
- Hardcover
Anbieter: Midtown Scholar Bookstore, Harrisburg, PA, USAMidtown Scholar Bookstore
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Befriedigend
EUR 45,46
EUR 5,24 VersandVersand innerhalb von USAAnzahl: 1 verfügbar
hardcover. Zustand: Good. No dust jacket. Good hardcover with some shelfwear; may have previous owner's name inside. Standard-sized.
Weitere Bilder- Hardcover
Anbieter: Versandantiquariat Funke, Dresden, DeutschlandVersandantiquariat Funke
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Gebraucht - Befriedigend
EUR 55,00
EUR 55,10 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Zustand: guter Zustand. F. guter Zustand, geringe Gebrauchs- und Alterungsspuren: ehemaliges Bibliotheksexemplar - Titel mit Stempeln und Notizen - Deckel innen mit angeklebter Folienecke - Seiten aber sauber und ordentlich - Einbandecken teils etwas gestaucht - Recrystallization and High Temperature Properties of a Developmenta…l Ni-Base ODS Superalloy (S. H. Hong, Y-G. Kim, and H.Y. Kim, KAIST, Taejon, Korea, J.M. Poole and J.J. deBarbadillo, Inco Alloys International Inc., Huntington, West Virginia) - Atomic Structure of Mechanically Alloyed Steels (T. S. Chou and H-K. D. H. Bhadeshia, University of Cambridge, Cambridge, England G. McColvin and I. C. Elliott, Inco Alloys Ltd., Hereford, England) - Intermetallics: TiAl 1 - Compaction of Mechanically Alloyed Gamma Titanium Aluminide (C. G. Li and W. H. Yang, Beijing Institute of Aeronautical Materials, Beijing, China, A. Frefer and F. H. Froes, University of ldaho, Moscow, Idaho) - Characterization of Microstructural Evolution of TiAl During Mechanical Alloying (R. Gauvin and M-A. Bernier, Universite de Sherbrooke, Sherbrooke, Quebec, Canada D. C. Joy, University of Tennessee, Knoxville, Tennessee, M. Schmidt, Oak Ridge National Laboratory, Oak Ridge, Tennessee) - A Study of the Solid State Reaction in Fe-Ti Alloys (S. Enzo and P Macri, Dipartimento di Chimica Fisica, Venezia, Italy P. Rose and N. Cowlam, University of Sheffield, Sheffield, England) - ODS Alloys 2 - Evolution of the Fine Grained Microstructure in ODSAlloy PM 2000 During the Processing Route (D. Sporer and G. Korb, Metallwerk PLANSEE GmbH, Tirol, Austria) - High Temperature Corrosion Resistance of Mechanical Alloyed ODS Alloys (G. D. Smith and J. J. deBarbadillo, Inco Alloys International Inc., Huntington, West Virginia) - Performance of Oxide Coating Films on ODS Alloys (Y. Ikeda and H. Sumiyoshi, Tsukuba Laboratories, Tsukuba, Japan, S. Matsuoka and E. Takeuchi, National Research Institute for Metals, Tokyo, Japan) - Intermetallics: TiAl 2 - Synergistic Effect of Mechanical Alloying and Thermochemical Processing on Microstructural Refinement of Titanium Aluminides (D. K. Mukhopadhyay, C. Suryanarayana, and F. H. Froes, University of Idaho, Moscow, Idaho) - Process Control in the Mechanical Alloying of TiAINb Alloys (P. S. Goodwin and C. M. Ward-Close, Defense Research Agency, Hants, England) - Preparation of Amorphous Ti - 50 - A1 - 50 - by Mechanical Alloying and Effects of Milling Atmospheres (G. Chen and K. Wang, University of Science and Technology Beijing, Beijing, China) - New Materials Produced by Mechanical Alloying (I. S. Polkin and A. B. Borzov, All Russian Institute of Light Alloys (VILS), Moscow, C.I.S., F. H. Froes and C. Suryanarayana, University of Idaho, Moscow, Idaho) - Chemical Refining Via Mechanical Alloying (P. G. McCormick, Y. Liu, H. Yang, and G. Nguyen, University of Western Australia, Nedlands, Australia, T. Alonso, CSIRO Division of Mineral Products, Floreat, Australia) - Reactivity of Mechanical Alloys (E. Ivanov, Tosoh SMD Inc., Grove City, Ohio) - Formation of New Metastable Transition Metal Alloys by Combination of Mechanical Alloying and Chemical Leaching (E. Ivanov, Tosoh SMD Inc., Grove City, Ohio, S. Makhlouf, K. Sumiyama, K. Suzuki, and H. Yamauchi, Institute for Materials Research, Sendai, Japan) - Mechanical Alloying of Al - 86 - Mn - 14 - in Hydrogen Atmosphere (G. Chen, K. Wang, and J. Wang, University of Science and Technology Beijing, Beijing, China, H. Jiang and M. Quan, Institute of Metal Research, Shenyang, China) - High Temperature Nitrides and Carbides for Structural Applications Synthesized by Mechanical Alloying (A. Calka, J. I. Nikolov, and B. W. Ninham, Australian National University, Canberra, Australia) - The Formation and Stability of Nanocrystalline Intermetallic Mixtures (G. B. Schaffer and A. J. Heron, University of Queensland, Brisbane, Australia) - Effect of Milling Temperature on the Structure of Some Intermetallic Compounds After Mechanical Milling (C. C. Koch and D. Pathak, N.
Verlag: American Society for Metals, Metals Park, OH, 1975
- Hardcover
Anbieter: Book Booth, Berea, OH, USABook Booth
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Befriedigend
EUR 58,51
EUR 5,16 VersandVersand innerhalb von USAAnzahl: 1 verfügbar
Hardcover. Zustand: Good. Zustand des Schutzumschlags: Issued without a dust jacket. Underlining & margin marks to approx 6 pages, else text clean; binding sound; moderate wear to covers. 496 pages. Illustrated. 24 papers presented at an International Symposium 7-8 November 1974 in Port Chester, New York, examining the formation…, properties, and effects of sulfide inclusions in steel. Size: 6 1/2" x 9 1/2".
