Schlechtendahl e g (36 Ergebnisse)

gebundene Ausgabe. Zustand: Gut. 348 Seiten Der Erhaltungszustand des hier angebotenen Werks ist trotz seiner Bibliotheksnutzung sehr sauber. Es befindet sich neben dem Rückenschild lediglich ein Bibliotheksstempel im Buch; ordnungsgemäß entwidmet. Einbandkanten sind leicht bestoßen. In ENGLISCHER Sprache. Sprache: Englisch Gewicht in Gramm: 770.…

Hardcover. Zustand: As New. No Jacket. 1st Edition. Beautiful copy, (PHOTOS ARE OF ACTUAL BOOK).

Hardcover. Zustand: Good. No Jacket. Light edgewear to boards, otherwise very clean and tight.

Zustand: Good. 334 pp., paperback, ex library, else textually clean & tight. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country.…

Zustand: Sehr gut. 164 p. In very good condition. ISBN: 9783540169277 Sprache: Englisch Gewicht in Gramm: 293 17,0 x 0,9 x 24,4 cm, softcover.

Zustand: Sehr gut. 352 p. In very good condition. ISBN: 9783540575313 Sprache: Englisch Gewicht in Gramm: 536 15,5 x 2,0 x 23,5 cm, softcover.

Zustand: Sehr gut. 260 p. In very good condition. ISBN: 9783540503927 Sprache: Englisch Gewicht in Gramm: 482 17,0 x 1,5 x 24,4 cm, softcover.

Zustand: New. In English.

Paperback. Zustand: Brand New. 349 pages. 9.25x6.10x0.80 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Product Data Technology encompasses the information related to all stages in the product life cycle from product design via production planning, production processes, production control, etc. through the delivery and operational stages of the technical product. Product Data Technology takes a coherent, unified view of the information captured in this whole life cycle and provides methodologies to support this integrated perspective. The Product Data Technology Advisory Group (pDTAG), is a Special Interest Group supported by the CIME Division within DG m of the European Commission. Founded in 1991, the PDTAG has encouraged the formation of a new subseries on Product Data Technology within the existing series of Research Reports ESPRIT. This subseries will provide a depository for the important contributions made by ESPRIT projects to the evolving area of Product Data Technology, particularly also those based on the STEP (ISO 10303). PDTAG is grateful to Springer Publishers for establishing this subseries which will serve to report recent international developments in Product Data Technology.…

Zustand: Sehr gut. Zustand: Sehr gut | Seiten: 444 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Zustand: New. In English.

Zustand: New. In English.

Kartoniert / Broschiert. Zustand: New. Edited for Working Group 2 (WG 2): Bayerische Motorenwerke AG, Cisigraph, Cranfield Institute of Technology, Danmarks Tekniske Hojskole, Kernforschungszentrum Karlsruhe GmbH, NEH Consulting Engineers ApS, Universitaet KarlsruheESPRIT Project 322, CAD In.

Zustand: Good. 149 pp., ex library, else textually clean and tight, softcover. - If you are reading this, this item is actually (physically) in our stock and ready for shipment once ordered. We are not bookjackers. Buyer is responsible for any additional duties, taxes, or fees required by recipient's country. Photos available upon request.…

Zustand: New. pp. 260 3rd Edition, Reprint.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - Principal authors: U. Kroszynski, B. Palstr9Sm 1.1 The evolution of concepts and specifications for CAD data exchange The CAD/CAM community has witnessed, during the last decade, the appearance of several specifications as well as proposals for standards which either attempt to cover wider areas or to be more reliable and stable than the others. With the rapid evolution of both hardware and software, the capabilities offered by CAD systems and CAD based application systems are far more advanced than they were only ten years ago, even when they are now based on micro-computers or personal comput ers. The situation with standards, however, is not and cannot be so. In order to be reliable and accepted by a wide community of both vendors and users, a standard has to be sta ble. This implies a life span of at least a decade. This also implies that the standard has to be general and flexible enough to accommodate present as well as expected future developments. 1.1.1 IGES The initial development of concepts for CAD data exchange is strongly influenced by the US Integrated Computer Aided Manufacturing (ICAM) programme, that dealt with the development of methods for data exchange. In September 1979, a subgroup was estab lished with participation of the National Bureau of Standards, the General Electric Com pany, and the Boeing Company. The result of this effort was the Initial Graphics Exchange Specification (IGES) that was published as a NBS report [61] in 1980.…

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - ESPRIT Project 322, 'CAD Interfaces', has been established to define the most important interfaces in CAD/CAM systems for data exchange, data base, finite element analysis, experimental analysis, and advanced modeling. The definitions of these interfaces are being elaborated in harmony with international standardization efforts in this field. One principal goal of the project is to develop techniques for the exchange of CAD information between CAD systems, and from the CAD domain to CAA (Computer Aided Analysis) and CAM (Computer Aided Manufacturing). This volume presents a proposal for a neutral file format for CAD data: curves, surfaces, and solids. The specification is based on a reference schema for CAD data bases and is defined informally with respect to its semantics and formally with respect to its syntax. This volume is a revised edition of 'Specification of a CAD\*I Neutral File for Solids' Version 3.2. The revision reflects the enhancements which result from the implementation of communication processors in eight different CAD systems and from the practical exchange of solid models between these systems. Due to the close interaction between the CAD\*I project and the coming-up international standard STEP this specification also serves as an introduction to the geometry model that will be included in the future international standard. …

Zustand: New. pp. xviii + 325 Softcover Reprint of the Original 1st Edition 1989.

Paperback. Zustand: Brand New. 3rd enlarged edition. 257 pages. 9.61x6.69x0.59 inches. In Stock.

Paperback. Zustand: Brand New. reprint edition. 325 pages. 9.25x6.50x0.75 inches. In Stock.

Paperback. Zustand: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

PF. Zustand: New. This item is printed on demand. Brand new book, sourced directly from publisher. Dispatch time is 6-7 days from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely.

Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Product Data Technology encompasses the information related to all stages in the product life cycle from product design via production planning, production processes, production control, etc. through the delivery and operational stages of the technical prod. …

Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This ESPRIT research report summarizes the results of a three-year project to develop standardized interface processors for product data exchange between systems in manufacturing industry.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 352 pp. Englisch. …

Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Product Data Technology encompasses the information related to all stages in the product life cycle from product design via production planning, production processes, production control, etc. through the delivery and operational stages of the technical product. Product Data Technology takes a coherent, unified view of the information captured in this whole life cycle and provides methodologies to support this integrated perspective. The Product Data Technology Advisory Group (pDTAG), is a Special Interest Group supported by the CIME Division within DG m of the European Commission. Founded in 1991, the PDTAG has encouraged the formation of a new subseries on Product Data Technology within the existing series of Research Reports ESPRIT. This subseries will provide a depository for the important contributions made by ESPRIT projects to the evolving area of Product Data Technology, particularly also those based on the STEP (ISO 10303). PDTAG is grateful to Springer Publishers for establishing this subseries which will serve to report recent international developments in Product Data Technology. 352 pp. Englisch.…

PF. Zustand: New. This item is printed on demand. Brand new book, sourced directly from publisher. Dispatch time is 6-7 days from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely.

Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Principal authors: U. Kroszynski, B. Palstr9Sm 1.1 The evolution of concepts and specifications for CAD data exchange The CAD/CAM community has witnessed, during the last decade, the appearance of several specifications as well as proposals for standards which either attempt to cover wider areas or to be more reliable and stable than the others. With the rapid evolution of both hardware and software, the capabilities offered by CAD systems and CAD based application systems are far more advanced than they were only ten years ago, even when they are now based on micro-computers or personal comput ers. The situation with standards, however, is not and cannot be so. In order to be reliable and accepted by a wide community of both vendors and users, a standard has to be sta ble. This implies a life span of at least a decade. This also implies that the standard has to be general and flexible enough to accommodate present as well as expected future developments. 1.1.1 IGES The initial development of concepts for CAD data exchange is strongly influenced by the US Integrated Computer Aided Manufacturing (ICAM) programme, that dealt with the development of methods for data exchange. In September 1979, a subgroup was estab lished with participation of the National Bureau of Standards, the General Electric Com pany, and the Boeing Company. The result of this effort was the Initial Graphics Exchange Specification (IGES) that was published as a NBS report [61] in 1980. 344 pp. Englisch.…

Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -ESPRIT Project 322, 'CAD Interfaces', has been established to define the most important interfaces in CAD/CAM systems for data exchange, data base, finite element analysis, experimental analysis, and advanced modeling. The definitions of these interfaces are being elaborated in harmony with international standardization efforts in this field. One principal goal of the project is to develop techniques for the exchange of CAD information between CAD systems, and from the CAD domain to CAA (Computer Aided Analysis) and CAM (Computer Aided Manufacturing). This volume presents a proposal for a neutral file format for CAD data: curves, surfaces, and solids. The specification is based on a reference schema for CAD data bases and is defined informally with respect to its semantics and formally with respect to its syntax. This volume is a revised edition of 'Specification of a CAD\*I Neutral File for Solids' Version 3.2. The revision reflects the enhancements which result from the implementation of communication processors in eight different CAD systems and from the practical exchange of solid models between these systems. Due to the close interaction between the CAD\*I project and the coming-up international standard STEP this specification also serves as an introduction to the geometry model that will be included in the future international standard. 260 pp. Englisch.…

Kartoniert / Broschiert. Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Edited for Working Group 2 (WG 2): Bayerische Motorenwerke AG. Cisigraph. Cranfield Institute of Technology. Danmarks Tekniske Hojskole. Kernforschungszentrum Karlsruhe GmbH. NEH Consulting Engineers ApS. Universitaet Karlsruhe.Principal authors: U. Kros.…