9786139997343 - geometry & process parameter optimisation of piston by taguchi method von gautam, navneet; sharma, vikas; dadhich, manish (9 Ergebnisse)
- Softcover
Anbieter: Books Puddle, New York, NY, USABooks Puddle
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 87,74
EUR 3,49 VersandVersand innerhalb von USAAnzahl: 4 verfügbar
Zustand: New.
- Softcover
Anbieter: preigu, Osnabrück, Deutschlandpreigu
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 47,85
EUR 70,00 VersandVersand von Deutschland nach USAAnzahl: 5 verfügbar
Taschenbuch. Zustand: Neu. Geometry & Process Parameter Optimisation of Piston by Taguchi Method | Navneet Gautam (u. a.) | Taschenbuch | 112 S. | Englisch | 2019 | LAP LAMBERT Academic Publishing | EAN 9786139997343 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]d…e | Anbieter: preigu.
- Softcover
Anbieter: Buchpark, Trebbin, DeutschlandBuchpark
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Gebraucht - Sehr gut
EUR 41,00
EUR 105,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Zustand: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | In this research work piston design optimisation is performed using DOE methods and simulates using Ansys FEM software. DOE method Taguchi is selected for design of experiments for this research work. Total five factors which are following material o…f piston, crown temperature of piston, gas pressure of piston, thermal coating of crown head and last factor is geometrical design of piston. Each factor have four level. Orthogonal array for 16 experiments are solved for research study. All 16 experiments are solved using Ansys FEM software. Two response parameters named thermal stress and deformation is selected for this research work. Signal to noise ratio analysis is performed for both responses and rank of factor and best case is identified for this study. In both cases factor design and temperature of crown surface is most identical and best boundary condition for piston design optimisation. Analysis of variance is also performed for this research study and non-linear modelling equation is generated with approval of adequacy check for these modelling equations. Composite desirability function is used to modify the optimum analysis for both responses named stress and deformation.
- Softcover
- Print-on-Demand
Anbieter: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, DeutschlandBuchWeltWeit Ludwig Meier e.K.
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 54,90
EUR 23,00 VersandVersand von Deutschland nach USAAnzahl: 2 verfügbar
Taschenbuch. Zustand: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In this research work piston design optimisation is performed using DOE methods and simulates using Ansys FEM software. DOE method Taguchi is selected for design of experiments for this research work. Total five factors which are foll…owing material of piston, crown temperature of piston, gas pressure of piston, thermal coating of crown head and last factor is geometrical design of piston. Each factor have four level. Orthogonal array for 16 experiments are solved for research study. All 16 experiments are solved using Ansys FEM software. Two response parameters named thermal stress and deformation is selected for this research work. Signal to noise ratio analysis is performed for both responses and rank of factor and best case is identified for this study. In both cases factor design and temperature of crown surface is most identical and best boundary condition for piston design optimisation. Analysis of variance is also performed for this research study and non-linear modelling equation is generated with approval of adequacy check for these modelling equations. Composite desirability function is used to modify the optimum analysis for both responses named stress and deformation. 112 pp. Englisch.
- Softcover
- Print-on-Demand
Anbieter: Majestic Books, Hounslow, Vereinigtes KönigreichMajestic Books
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 89,64
EUR 7,54 VersandVersand von Vereinigtes Königreich nach USAAnzahl: 4 verfügbar
Zustand: New. Print on Demand.
- Softcover
- Print-on-Demand
Anbieter: moluna, Greven, Deutschlandmoluna
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 45,45
EUR 48,99 VersandVersand von Deutschland nach USAAnzahl: Mehr als 20 verfügbar
Zustand: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Gautam NavneetNavneet Gautam did his Bachelors in Mechanical Engineering from Rajasthan Technical University, Kota in the year 2015. He did his Masters in Machine Design Engineering from Jaganath Universi…ty, Jaipur in the year 2018. .
- Softcover
- Print-on-Demand
Anbieter: Biblios, frankfurt am main, HESSE, DeutschlandBiblios
Verkäufer/-in kontaktierenVerkäufer/-in mit 4 SternenZustand: Neu
EUR 89,57
EUR 9,95 VersandVersand von Deutschland nach USAAnzahl: 4 verfügbar
Zustand: New. PRINT ON DEMAND.
- Softcover
- Print-on-Demand
Anbieter: buchversandmimpf2000, Emtmannsberg, BAYE, Deutschlandbuchversandmimpf2000
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 54,90
EUR 60,00 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In this research work piston design optimisation is performed using DOE methods and simulates using Ansys FEM software. DOE method Taguchi is selected for design of experiments for this research work. Total five factors which are followin…g material of piston, crown temperature of piston, gas pressure of piston, thermal coating of crown head and last factor is geometrical design of piston. Each factor have four level. Orthogonal array for 16 experiments are solved for research study. All 16 experiments are solved using Ansys FEM software. Two response parameters named thermal stress and deformation is selected for this research work. Signal to noise ratio analysis is performed for both responses and rank of factor and best case is identified for this study. In both cases factor design and temperature of crown surface is most identical and best boundary condition for piston design optimisation. Analysis of variance is also performed for this research study and non-linear modelling equation is generated with approval of adequacy check for these modelling equations. Composite desirability function is used to modify the optimum analysis for both responses named stress and deformation.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 112 pp. Englisch.
- Softcover
- Print-on-Demand
Anbieter: AHA-BUCH GmbH, Einbeck, DeutschlandAHA-BUCH GmbH
Verkäufer/-in kontaktierenVerkäufer/-in mit 5 SternenZustand: Neu
EUR 55,56
EUR 60,93 VersandVersand von Deutschland nach USAAnzahl: 1 verfügbar
Taschenbuch. Zustand: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In this research work piston design optimisation is performed using DOE methods and simulates using Ansys FEM software. DOE method Taguchi is selected for design of experiments for this research work. Total five factors which are following… material of piston, crown temperature of piston, gas pressure of piston, thermal coating of crown head and last factor is geometrical design of piston. Each factor have four level. Orthogonal array for 16 experiments are solved for research study. All 16 experiments are solved using Ansys FEM software. Two response parameters named thermal stress and deformation is selected for this research work. Signal to noise ratio analysis is performed for both responses and rank of factor and best case is identified for this study. In both cases factor design and temperature of crown surface is most identical and best boundary condition for piston design optimisation. Analysis of variance is also performed for this research study and non-linear modelling equation is generated with approval of adequacy check for these modelling equations. Composite desirability function is used to modify the optimum analysis for both responses named stress and deformation.
