boundary element method programming von beer gernot (46 Ergebnisse)

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,900grams, ISBN:9780471863335.

Zustand: Good. This is an ex-library book and may have the usual library/used-book markings inside.This book has soft covers. In good all round condition. Please note the Image in this listing is a stock photo and may not match the covers of the actual item,950grams, ISBN:9780471863335.

Zustand: Good. Ships from the UK. Former library book; may include library markings. Used book that is in clean, average condition without any missing pages.

PAP. Zustand: New. New Book. Shipped from UK. Established seller since 2000.

Zustand: New. In.

Zustand: New. GERNOT BEER is Professor of Structural Analysis at the University of Technology Graz, Austria. He has worked in the area of numerical modelling for more than two decades and has done some pioneering work in the coupling of the FEM and BEM. He is the author .

Zustand: New. pp. xiv + 494 1st Edition.

Zustand: New. pp. xiv + 494.

Zustand: New. pp. xiv + 494 Illus.

Zustand: New.

Paperback / softback. Zustand: New. New copy - Usually dispatched within 4 working days. 840.

Taschenbuch. Zustand: Neu. Neuware - Randwertmethoden wendet man zur Lösung vielfältiger physikalischer Probleme an. Da man auf diese Weise eine vollständige Lösung ausschließlich in Abhängigkeit von Randwerten erhalten kann, werden diese zeitsparenden und zuverlässigen Verfahren auch in der Technik immer beliebter. Dieser Band erklärt Randwertmethoden weniger mathematisch als aus der Sicht des Anwenders. Programmiert wird mit FORTRAN 95. (07/00).

Zustand: New.

Zustand: As New. Unread book in perfect condition.

Zustand: As New. Unread book in perfect condition.

Zustand: New. Providing an easy introduction to the boundary element method, this book is ideal for any reader wishing to work in this field or use this method for the solution of engineering problems. From the beginning, the emphasis is on the implementation of the method into computer programs which can be used to solve real problems. Num Pages: 472 pages, Illustrations. BIC Classification: UMX; UYAM. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 245 x 170 x 27. Weight in Grams: 836. . 2001. 1st Edition. Paperback. . . . .

Zustand: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Zustand: New. pp. 472.

Zustand: New. pp. 472.

Paperback. Zustand: new. Paperback. Providing an easy introduction to the boundary element method, this book is ideal for any reader wishing to work in this field or use this method for the solution of engineering problems. From the beginning, the emphasis is on the implementation of the method into computer programs which can be used to solve real problems. The book covers two-andthree-dimensional linear and non-linear analysis in potential flow (heat flow and seepage) and static elasticity. Several computer programs are listed in the book and may be downloaded free of charge via the Internet. They include programs and subroutines for: * 2-D analysis of potential problems using the Trefftz method * 2-D and 3-D linear analysis of potential and static elasticity problems using isoparametric elements (single and multiple regions) * implementation of non-linear problems * coupling to finite elements The programs (written in FORTRAN 90) are well documented, and can be employed by the user to gain experience with the method through the solution of small test examples. Furthermore, readers may use them as a starting point for developing their own boundary element package. In addition, exercises are included in most chapters involving the use of the programs with answers given in an Appendix, and a number of interesting industrial applications in the areas of mechanical, civil and geotechnical engineering are presented. Providing an easy introduction to the boundary element method, this book is ideal for any reader wishing to work in this field or use this method for the solution of engineering problems. From the beginning, the emphasis is on the implementation of the method into computer programs which can be used to solve real problems. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.

Paperback. Zustand: new. Paperback. Providing an easy introduction to the boundary element method, this book is ideal for any reader wishing to work in this field or use this method for the solution of engineering problems. From the beginning, the emphasis is on the implementation of the method into computer programs which can be used to solve real problems. The book covers two-andthree-dimensional linear and non-linear analysis in potential flow (heat flow and seepage) and static elasticity. Several computer programs are listed in the book and may be downloaded free of charge via the Internet. They include programs and subroutines for: * 2-D analysis of potential problems using the Trefftz method * 2-D and 3-D linear analysis of potential and static elasticity problems using isoparametric elements (single and multiple regions) * implementation of non-linear problems * coupling to finite elements The programs (written in FORTRAN 90) are well documented, and can be employed by the user to gain experience with the method through the solution of small test examples. Furthermore, readers may use them as a starting point for developing their own boundary element package. In addition, exercises are included in most chapters involving the use of the programs with answers given in an Appendix, and a number of interesting industrial applications in the areas of mechanical, civil and geotechnical engineering are presented. Providing an easy introduction to the boundary element method, this book is ideal for any reader wishing to work in this field or use this method for the solution of engineering problems. From the beginning, the emphasis is on the implementation of the method into computer programs which can be used to solve real problems. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Zustand: New. Providing an easy introduction to the boundary element method, this book is ideal for any reader wishing to work in this field or use this method for the solution of engineering problems. From the beginning, the emphasis is on the implementation of the method into computer programs which can be used to solve real problems. Num Pages: 472 pages, Illustrations. BIC Classification: UMX; UYAM. Category: (P) Professional & Vocational; (UP) Postgraduate, Research & Scholarly; (UU) Undergraduate. Dimension: 245 x 170 x 27. Weight in Grams: 836. . 2001. 1st Edition. Paperback. . . . . Books ship from the US and Ireland.

Paperback. Zustand: Brand New. 472 pages. 9.75x6.75x1.00 inches. In Stock.

Taschenbuch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This is a sequel to the book 'Programming the Boundary Element Method' by G. Beer published by Wiley in 2001. The scope of this book is different however and this is reflected in the title. Whereas the previous book concentrated on explaining the implementation of a limited range of problems into computer code and the emphasis was on programming, in the current book the problems covered are extended, the emphasis is on explaining the theory and computer code is not presented for all topics. The new topics covered range from dynamics to piezo-electricity. However, the main idea, to provide an explanation of the Boundary Element Method (BEM), that is easy for engineers and scientists to follow, is retained. This is achieved by explaining some aspects of the method in an engineering rather than mathematical way. Another new feature of the book is that it deals with the implementation of the method on parallel processing hardware. I. M. Smith, who has been involved in programming the finite element method for decades, illustrates that the BEM is 'embarrassingly parallelisable'. It is shown that the conversion of the BEM programs to run efficiently on parallel processing hardware is not too difficult and the results are very impressive, such as solving a 20 000 element problem during a 'coffee break'.

Zustand: New.

Paperback. Zustand: Good. Connecting readers with great books since 1972! Used textbooks may not include companion materials such as access codes, etc. May have some wear or writing/highlighting. We ship orders daily and Customer Service is our top priority!

Paperback. Zustand: new. Paperback. Providing an easy introduction to the boundary element method, this book is ideal for any reader wishing to work in this field or use this method for the solution of engineering problems. From the beginning, the emphasis is on the implementation of the method into computer programs which can be used to solve real problems. The book covers two-andthree-dimensional linear and non-linear analysis in potential flow (heat flow and seepage) and static elasticity. Several computer programs are listed in the book and may be downloaded free of charge via the Internet. They include programs and subroutines for: * 2-D analysis of potential problems using the Trefftz method * 2-D and 3-D linear analysis of potential and static elasticity problems using isoparametric elements (single and multiple regions) * implementation of non-linear problems * coupling to finite elements The programs (written in FORTRAN 90) are well documented, and can be employed by the user to gain experience with the method through the solution of small test examples. Furthermore, readers may use them as a starting point for developing their own boundary element package. In addition, exercises are included in most chapters involving the use of the programs with answers given in an Appendix, and a number of interesting industrial applications in the areas of mechanical, civil and geotechnical engineering are presented. Providing an easy introduction to the boundary element method, this book is ideal for any reader wishing to work in this field or use this method for the solution of engineering problems. From the beginning, the emphasis is on the implementation of the method into computer programs which can be used to solve real problems. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Zustand: New. pp. 514.

Buch. Zustand: Neu. Neuware -This is a sequel to the book ¿Programming the Boundary Element Method¿ by G. Beer published by Wiley in 2001. The scope of this book is different however and this is reflected in the title. Whereas the previous book concentrated on explaining the implementation of a limited range of problems into computer code and the emphasis was on programming, in the current book the problems covered are extended, the emphasis is on explaining the theory and computer code is not presented for all topics. The new topics covered range from dynamics to piezo-electricity. However, the main idea, to provide an explanation of the Boundary Element Method (BEM), that is easy for engineers and scientists to follow, is retained. This is achieved by explaining some aspects of the method in an engineering rather than mathematical way. Another new feature of the book is that it deals with the implementation of the method on parallel processing hardware. I. M. Smith, who has been involved in programming the finite element method for decades, illustrates that the BEM is ¿embarrassingly parallelisable¿. It is shown that the conversion of the BEM programs to run efficiently on parallel processing hardware is not too difficult and the results are very impressive, such as solving a 20 000 element problem during a ¿coffee break¿.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 516 pp. Englisch.

Buch. Zustand: Neu. Druck auf Anfrage Neuware - Printed after ordering - This is a sequel to the book 'Programming the Boundary Element Method' by G. Beer published by Wiley in 2001. The scope of this book is different however and this is reflected in the title. Whereas the previous book concentrated on explaining the implementation of a limited range of problems into computer code and the emphasis was on programming, in the current book the problems covered are extended, the emphasis is on explaining the theory and computer code is not presented for all topics. The new topics covered range from dynamics to piezo-electricity. However, the main idea, to provide an explanation of the Boundary Element Method (BEM), that is easy for engineers and scientists to follow, is retained. This is achieved by explaining some aspects of the method in an engineering rather than mathematical way. Another new feature of the book is that it deals with the implementation of the method on parallel processing hardware. I. M. Smith, who has been involved in programming the finite element method for decades, illustrates that the BEM is 'embarrassingly parallelisable'. It is shown that the conversion of the BEM programs to run efficiently on parallel processing hardware is not too difficult and the results are very impressive, such as solving a 20 000 element problem during a 'coffee break'.